| /* |
| * Copyright (c) 2019 Nordic Semiconductor ASA |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| dcnf: dcnf@0 { |
| compatible = "nordic,nrf-dcnf"; |
| reg = <0x0 0x1000>; |
| status = "okay"; |
| }; |
| |
| oscillators: oscillator@4000 { |
| compatible = "nordic,nrf-oscillators"; |
| reg = <0x4000 0x1000>; |
| status = "okay"; |
| }; |
| |
| regulators: regulator@4000 { |
| compatible = "nordic,nrf-regulators"; |
| reg = <0x4000 0x1000>; |
| status = "okay"; |
| }; |
| |
| clock: clock@5000 { |
| compatible = "nordic,nrf-clock"; |
| reg = <0x5000 0x1000>; |
| interrupts = <5 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| power: power@5000 { |
| compatible = "nordic,nrf-power"; |
| reg = <0x5000 0x1000>; |
| interrupts = <5 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| reset: reset-controller@5000 { |
| compatible = "nordic,nrf-reset"; |
| reg = <0x5000 0x1000>; |
| status = "okay"; |
| }; |
| |
| ctrlap: ctrlap@6000 { |
| compatible = "nordic,nrf-ctrlapperi"; |
| reg = <0x6000 0x1000>; |
| status = "okay"; |
| }; |
| |
| i2c0: i2c@8000 { |
| /* |
| * This i2c node can be either TWIM or TWIS, for the user to pick: |
| * compatible = "nordic,nrf-twim" or |
| * "nordic,nrf-twis". |
| */ |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x8000 0x1000>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@8000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x8000 0x1000>; |
| interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| status = "disabled"; |
| }; |
| |
| uart0: uart@8000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0x8000 0x1000>; |
| interrupts = <8 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@9000 { |
| /* |
| * This i2c node can be TWIM or TWIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-twim" or |
| * "nordic,nrf-twis". |
| */ |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9000 0x1000>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@9000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9000 0x1000>; |
| interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| status = "disabled"; |
| }; |
| |
| uart1: uart@9000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0x9000 0x1000>; |
| interrupts = <9 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@a000 { |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa000 0x1000>; |
| interrupts = <10 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(32)>; |
| rx-delay-supported; |
| rx-delay = <2>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@b000 { |
| /* |
| * This i2c node can be TWIM or TWIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-twim" or |
| * "nordic,nrf-twis". |
| */ |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb000 0x1000>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@b000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb000 0x1000>; |
| interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| status = "disabled"; |
| }; |
| |
| uart2: uart@b000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xb000 0x1000>; |
| interrupts = <11 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@c000 { |
| /* |
| * This i2c node can be TWIM or TWIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-twim" or |
| * "nordic,nrf-twis". |
| */ |
| compatible = "nordic,nrf-twim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc000 0x1000>; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| interrupts = <12 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@c000 { |
| /* |
| * This spi node can be either SPIM or SPIS, |
| * for the user to pick: |
| * compatible = "nordic,nrf-spim" or |
| * "nordic,nrf-spis". |
| */ |
| compatible = "nordic,nrf-spim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc000 0x1000>; |
| interrupts = <12 NRF_DEFAULT_IRQ_PRIORITY>; |
| max-frequency = <DT_FREQ_M(8)>; |
| status = "disabled"; |
| }; |
| |
| uart3: uart@c000 { |
| compatible = "nordic,nrf-uarte"; |
| reg = <0xc000 0x1000>; |
| interrupts = <12 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@e000 { |
| compatible = "nordic,nrf-saadc"; |
| reg = <0xe000 0x1000>; |
| interrupts = <14 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| timer0: timer@f000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0xf000 0x1000>; |
| cc-num = <6>; |
| interrupts = <15 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer1: timer@10000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0x10000 0x1000>; |
| cc-num = <6>; |
| interrupts = <16 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| timer2: timer@11000 { |
| compatible = "nordic,nrf-timer"; |
| status = "disabled"; |
| reg = <0x11000 0x1000>; |
| cc-num = <6>; |
| interrupts = <17 NRF_DEFAULT_IRQ_PRIORITY>; |
| prescaler = <0>; |
| }; |
| |
| rtc0: rtc@14000 { |
| compatible = "nordic,nrf-rtc"; |
| reg = <0x14000 0x1000>; |
| cc-num = <4>; |
| interrupts = <20 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| clock-frequency = <32768>; |
| prescaler = <1>; |
| }; |
| |
| rtc1: rtc@15000 { |
| compatible = "nordic,nrf-rtc"; |
| reg = <0x15000 0x1000>; |
| cc-num = <4>; |
| interrupts = <21 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| clock-frequency = <32768>; |
| prescaler = <1>; |
| }; |
| |
| dppic: dppic@17000 { |
| compatible = "nordic,nrf-dppic"; |
| reg = <0x17000 0x1000>; |
| status = "okay"; |
| }; |
| |
| wdt: wdt0: watchdog@18000 { |
| compatible = "nordic,nrf-wdt"; |
| reg = <0x18000 0x1000>; |
| interrupts = <24 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| wdt1: watchdog@19000 { |
| compatible = "nordic,nrf-wdt"; |
| reg = <0x19000 0x1000>; |
| interrupts = <25 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| comp: comparator@1a000 { |
| /* |
| * This comparator node can be COMP or LPCOMP, |
| * for the user to pick: |
| * compatible = "nordic,nrf-comp" or |
| * "nordic,nrf-lpcomp". |
| */ |
| compatible = "nordic,nrf-comp"; |
| reg = <0x1a000 0x1000>; |
| interrupts = <26 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| egu0: egu@1b000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1b000 0x1000>; |
| interrupts = <27 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu1: egu@1c000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1c000 0x1000>; |
| interrupts = <28 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu2: egu@1d000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1d000 0x1000>; |
| interrupts = <29 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu3: egu@1e000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1e000 0x1000>; |
| interrupts = <30 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu4: egu@1f000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x1f000 0x1000>; |
| interrupts = <31 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| egu5: egu@20000 { |
| compatible = "nordic,nrf-egu"; |
| reg = <0x20000 0x1000>; |
| interrupts = <32 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| pwm0: pwm@21000 { |
| compatible = "nordic,nrf-pwm"; |
| reg = <0x21000 0x1000>; |
| interrupts = <33 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm1: pwm@22000 { |
| compatible = "nordic,nrf-pwm"; |
| reg = <0x22000 0x1000>; |
| interrupts = <34 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm2: pwm@23000 { |
| compatible = "nordic,nrf-pwm"; |
| reg = <0x23000 0x1000>; |
| interrupts = <35 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| pwm3: pwm@24000 { |
| compatible = "nordic,nrf-pwm"; |
| reg = <0x24000 0x1000>; |
| interrupts = <36 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| pdm0: pdm@26000 { |
| compatible = "nordic,nrf-pdm"; |
| reg = <0x26000 0x1000>; |
| interrupts = <38 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@28000 { |
| compatible = "nordic,nrf-i2s"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x28000 0x1000>; |
| interrupts = <40 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| mbox: ipc: mbox@2a000 { |
| compatible = "nordic,mbox-nrf-ipc", "nordic,nrf-ipc"; |
| reg = <0x2a000 0x1000>; |
| tx-mask = <0x0000ffff>; |
| rx-mask = <0x0000ffff>; |
| interrupts = <42 NRF_DEFAULT_IRQ_PRIORITY>; |
| #mbox-cells = <1>; |
| status = "okay"; |
| }; |
| |
| qspi: qspi@2b000 { |
| compatible = "nordic,nrf-qspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2b000 0x1000>, <0x10000000 0x10000000>; |
| reg-names = "qspi", "qspi_mm"; |
| interrupts = <43 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| nfct: nfct@2d000 { |
| compatible = "nordic,nrf-nfct"; |
| reg = <0x2d000 0x1000>; |
| interrupts = <45 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| mutex: mutex@30000 { |
| compatible = "nordic,nrf-mutex"; |
| reg = <0x30000 0x1000>; |
| status = "okay"; |
| }; |
| |
| qdec0: qdec@33000 { |
| compatible = "nordic,nrf-qdec"; |
| reg = <0x33000 0x1000>; |
| interrupts = <51 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| qdec1: qdec@34000 { |
| compatible = "nordic,nrf-qdec"; |
| reg = <0x34000 0x1000>; |
| interrupts = <52 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "disabled"; |
| }; |
| |
| usbd: usbd@36000 { |
| compatible = "nordic,nrf-usbd"; |
| reg = <0x36000 0x1000>; |
| interrupts = <54 NRF_DEFAULT_IRQ_PRIORITY>; |
| num-bidir-endpoints = <1>; |
| num-in-endpoints = <7>; |
| num-out-endpoints = <7>; |
| num-isoin-endpoints = <1>; |
| num-isoout-endpoints = <1>; |
| status = "disabled"; |
| }; |
| |
| usbreg: regulator@37000 { |
| compatible = "nordic,nrf-usbreg"; |
| reg = <0x37000 0x1000>; |
| interrupts = <55 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| flash_controller: flash-controller@39000 { |
| compatible = "nordic,nrf53-flash-controller"; |
| reg = <0x39000 0x1000>; |
| partial-erase; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| |
| flash0: flash@0 { |
| compatible = "soc-nv-flash"; |
| erase-block-size = <4096>; |
| write-block-size = <4>; |
| }; |
| }; |
| |
| kmu: kmu@39000 { |
| compatible = "nordic,nrf-kmu"; |
| reg = <0x39000 0x1000>; |
| interrupts = <57 NRF_DEFAULT_IRQ_PRIORITY>; |
| status = "okay"; |
| }; |
| |
| vmc: vmc@81000 { |
| compatible = "nordic,nrf-vmc"; |
| reg = <0x81000 0x1000>; |
| status = "okay"; |
| }; |
| |
| gpio0: gpio@842500 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0x842500 0x300>; |
| #gpio-cells = <2>; |
| status = "disabled"; |
| port = <0>; |
| }; |
| |
| gpio1: gpio@842800 { |
| compatible = "nordic,nrf-gpio"; |
| gpio-controller; |
| reg = <0x842800 0x300>; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| status = "disabled"; |
| port = <1>; |
| }; |
