blob: db8dd758b585f390ff06d836af0b5127f49b75d6 [file] [log] [blame]
/*
* Copyright (c) 2019 - 2020, Nordic Semiconductor ASA
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef NRFX_CONFIG_NRF5340_NETWORK_H__
#define NRFX_CONFIG_NRF5340_NETWORK_H__
#ifndef NRFX_CONFIG_H__
#error "This file should not be included directly. Include nrfx_config.h instead."
#endif
/*
* The MDK provides macros for accessing the peripheral register structures
* by using their secure and non-secure address mappings (with the names
* containing the suffix _S or _NS, respectively). Because the nrfx drivers
* use the macros without any suffixes, you must translate the names.
* The following section provides configuration for the name translation.
*/
#define NRF_AAR NRF_AAR_NS
#define NRF_ACL NRF_ACL_NS
#define NRF_CCM NRF_CCM_NS
#define NRF_CLOCK NRF_CLOCK_NS
#define NRF_CTI NRF_CTI_NS
#define NRF_CTRLAP NRF_CTRLAP_NS
#define NRF_DCNF NRF_DCNF_NS
#define NRF_DPPIC NRF_DPPIC_NS
#define NRF_ECB NRF_ECB_NS
#define NRF_EGU0 NRF_EGU0_NS
#define NRF_FICR NRF_FICR_NS
#define NRF_GPIOTE NRF_GPIOTE_NS
#define NRF_IPC NRF_IPC_NS
#define NRF_NVMC NRF_NVMC_NS
#define NRF_P0 NRF_P0_NS
#define NRF_P1 NRF_P1_NS
#define NRF_POWER NRF_POWER_NS
#define NRF_RADIO NRF_RADIO_NS
#define NRF_RESET NRF_RESET_NS
#define NRF_RNG NRF_RNG_NS
#define NRF_RTC0 NRF_RTC0_NS
#define NRF_RTC1 NRF_RTC1_NS
#define NRF_SPIM0 NRF_SPIM0_NS
#define NRF_SPIS0 NRF_SPIS0_NS
#define NRF_SWI0 NRF_SWI0_NS
#define NRF_SWI1 NRF_SWI1_NS
#define NRF_SWI2 NRF_SWI2_NS
#define NRF_SWI3 NRF_SWI3_NS
#define NRF_TEMP NRF_TEMP_NS
#define NRF_TIMER0 NRF_TIMER0_NS
#define NRF_TIMER1 NRF_TIMER1_NS
#define NRF_TIMER2 NRF_TIMER2_NS
#define NRF_TWIM0 NRF_TWIM0_NS
#define NRF_TWIS0 NRF_TWIS0_NS
#define NRF_UARTE0 NRF_UARTE0_NS
#define NRF_UICR NRF_UICR_NS
#define NRF_VMC NRF_VMC_NS
#define NRF_VREQCTRL NRF_VREQCTRL_NS
#define NRF_WDT NRF_WDT_NS
// <<< Use Configuration Wizard in Context Menu >>>\n
// <h> nRF_Drivers
// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver.
//==========================================================
#ifndef NRFX_CLOCK_ENABLED
#define NRFX_CLOCK_ENABLED 0
#endif
// <o> NRFX_CLOCK_CONFIG_LF_SRC - LF clock source.
// <0=> ULP
// <1=> RC
// <2=> XTAL
// <3=> Synth
#ifndef NRFX_CLOCK_CONFIG_LF_SRC
#define NRFX_CLOCK_CONFIG_LF_SRC 2
#endif
// <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED - Enables LF Clock Calibration Support
#ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED
#define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0
#endif
// <q> NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED - Enables two-stage LFXO start procedure
// <i> If set to a non-zero value, LFRC will be started before LFXO and corresponding
// <i> event will be generated. It means that CPU will be woken up when LFRC
// <i> oscillator starts, but user callback will be invoked only after LFXO
// <i> finally starts.
#ifndef NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED
#define NRFX_CLOCK_CONFIG_LFXO_TWO_STAGE_ENABLED 0
#endif
// <o> NRFX_CLOCK_CONFIG_HFCLK192M_SRC - HFCLK192M source.
// <0=> HFINT
// <1=> HFXO
#ifndef NRFX_CLOCK_CONFIG_HFCLK192M_SRC
#define NRFX_CLOCK_CONFIG_HFCLK192M_SRC 1
#endif
// <o> NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_CLOCK_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_DPPI_ENABLED - nrfx_dppi - DPPI allocator.
//==========================================================
#ifndef NRFX_DPPI_ENABLED
#define NRFX_DPPI_ENABLED 0
#endif
// <e> NRFX_DPPI_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_DPPI_CONFIG_LOG_ENABLED
#define NRFX_DPPI_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_DPPI_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_DPPI_CONFIG_LOG_LEVEL
#define NRFX_DPPI_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_DPPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_DPPI_CONFIG_INFO_COLOR
#define NRFX_DPPI_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_DPPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_DPPI_CONFIG_DEBUG_COLOR
#define NRFX_DPPI_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_EGU_ENABLED - nrfx_egu - EGU peripheral driver.
//==========================================================
#ifndef NRFX_EGU_ENABLED
#define NRFX_EGU_ENABLED 0
#endif
// <q> NRFX_EGU0_ENABLED - Enable EGU0 instance.
#ifndef NRFX_EGU0_ENABLED
#define NRFX_EGU0_ENABLED 0
#endif
// <o> NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_EGU_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// </e>
// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver.
//==========================================================
#ifndef NRFX_GPIOTE_ENABLED
#define NRFX_GPIOTE_ENABLED 0
#endif
// <o> NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS - Number of dedicated handlers
#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS
#define NRFX_GPIOTE_CONFIG_NUM_OF_EVT_HANDLERS 1
#endif
// <o> NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_GPIOTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_IPC_ENABLED - nrfx_ipc - IPC peripheral driver
//==========================================================
#ifndef NRFX_IPC_ENABLED
#define NRFX_IPC_ENABLED 0
#endif
// </e>
// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
//==========================================================
#ifndef NRFX_NVMC_ENABLED
#define NRFX_NVMC_ENABLED 0
#endif
// </e>
// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver.
//==========================================================
#ifndef NRFX_POWER_ENABLED
#define NRFX_POWER_ENABLED 0
#endif
// <o> NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// </e>
// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing (PRS) module.
//==========================================================
#ifndef NRFX_PRS_ENABLED
#define NRFX_PRS_ENABLED 0
#endif
// <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module.
#ifndef NRFX_PRS_BOX_0_ENABLED
#define NRFX_PRS_BOX_0_ENABLED 0
#endif
// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
#define NRFX_PRS_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
#define NRFX_PRS_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_PRS_CONFIG_INFO_COLOR
#define NRFX_PRS_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
//==========================================================
#ifndef NRFX_RNG_ENABLED
#define NRFX_RNG_ENABLED 0
#endif
// <o> NRFX_RNG_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_RNG_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_RNG_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
#define NRFX_RNG_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_RNG_CONFIG_LOG_LEVEL - Default Severity level
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
#define NRFX_RNG_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_RNG_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_RNG_CONFIG_INFO_COLOR
#define NRFX_RNG_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver.
//==========================================================
#ifndef NRFX_RTC_ENABLED
#define NRFX_RTC_ENABLED 0
#endif
// <q> NRFX_RTC0_ENABLED - Enables RTC0 instance.
#ifndef NRFX_RTC0_ENABLED
#define NRFX_RTC0_ENABLED 0
#endif
// <q> NRFX_RTC1_ENABLED - Enables RTC1 instance.
#ifndef NRFX_RTC1_ENABLED
#define NRFX_RTC1_ENABLED 0
#endif
// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
#define NRFX_RTC_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_RTC_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
#define NRFX_RTC_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_RTC_CONFIG_INFO_COLOR
#define NRFX_RTC_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver.
//==========================================================
#ifndef NRFX_SPIM_ENABLED
#define NRFX_SPIM_ENABLED 0
#endif
// <q> NRFX_SPIM0_ENABLED - Enables SPIM0 instance.
#ifndef NRFX_SPIM0_ENABLED
#define NRFX_SPIM0_ENABLED 0
#endif
// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_SPIM_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
#define NRFX_SPIM_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver.
//==========================================================
#ifndef NRFX_SPIS_ENABLED
#define NRFX_SPIS_ENABLED 0
#endif
// <q> NRFX_SPIS0_ENABLED - Enables SPIS0 instance.
#ifndef NRFX_SPIS0_ENABLED
#define NRFX_SPIS0_ENABLED 0
#endif
// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_SPIS_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
#define NRFX_SPIS_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <q> NRFX_SYSTICK_ENABLED - nrfx_systick - ARM(R) SysTick driver.
#ifndef NRFX_SYSTICK_ENABLED
#define NRFX_SYSTICK_ENABLED 0
#endif
// <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver
//==========================================================
#ifndef NRFX_TEMP_ENABLED
#define NRFX_TEMP_ENABLED 0
#endif
// <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// </e>
// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER peripheral driver.
//==========================================================
#ifndef NRFX_TIMER_ENABLED
#define NRFX_TIMER_ENABLED 0
#endif
// <q> NRFX_TIMER0_ENABLED - Enables TIMER0 instance.
#ifndef NRFX_TIMER0_ENABLED
#define NRFX_TIMER0_ENABLED 0
#endif
// <q> NRFX_TIMER1_ENABLED - Enables TIMER1 instance.
#ifndef NRFX_TIMER1_ENABLED
#define NRFX_TIMER1_ENABLED 0
#endif
// <q> NRFX_TIMER2_ENABLED - Enables TIMER2 instance.
#ifndef NRFX_TIMER2_ENABLED
#define NRFX_TIMER2_ENABLED 0
#endif
// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_TIMER_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
#define NRFX_TIMER_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver.
//==========================================================
#ifndef NRFX_TWIM_ENABLED
#define NRFX_TWIM_ENABLED 0
#endif
// <q> NRFX_TWIM0_ENABLED - Enables TWIM0 instance.
#ifndef NRFX_TWIM0_ENABLED
#define NRFX_TWIM0_ENABLED 0
#endif
// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_TWIM_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_TWIM_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
#define NRFX_TWIM_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver.
//==========================================================
#ifndef NRFX_TWIS_ENABLED
#define NRFX_TWIS_ENABLED 0
#endif
// <q> NRFX_TWIS0_ENABLED - Enables TWIS0 instance.
#ifndef NRFX_TWIS0_ENABLED
#define NRFX_TWIS0_ENABLED 0
#endif
// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assumes that any instance would be initialized only once.
// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
#endif
// <q> NRFX_TWIS_NO_SYNC_MODE - Removes support for synchronous mode.
// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
#ifndef NRFX_TWIS_NO_SYNC_MODE
#define NRFX_TWIS_NO_SYNC_MODE 0
#endif
// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_TWIS_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
#define NRFX_TWIS_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver.
//==========================================================
#ifndef NRFX_UARTE_ENABLED
#define NRFX_UARTE_ENABLED 0
#endif
// <o> NRFX_UARTE0_ENABLED - Enables UARTE0 instances
#ifndef NRFX_UARTE0_ENABLED
#define NRFX_UARTE0_ENABLED 0
#endif
// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_UARTE_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
#define NRFX_UARTE_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver.
//==========================================================
#ifndef NRFX_WDT_ENABLED
#define NRFX_WDT_ENABLED 0
#endif
// <q> NRFX_WDT0_ENABLED - Enable WDT0 instance.
#ifndef NRFX_WDT0_ENABLED
#define NRFX_WDT0_ENABLED 0
#endif
// <o> NRFX_WDT_CONFIG_NO_IRQ - Remove WDT IRQ handling from WDT driver.
// <0=> Include WDT IRQ handling
// <1=> Remove WDT IRQ handling
#ifndef NRFX_WDT_CONFIG_NO_IRQ
#define NRFX_WDT_CONFIG_NO_IRQ 0
#endif
// <o> NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority.
// <0=> 0 (highest)
// <1=> 1
// <2=> 2
// <3=> 3
// <4=> 4
// <5=> 5
// <6=> 6
// <7=> 7
#ifndef NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY
#define NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY 7
#endif
// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
//==========================================================
#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
#define NRFX_WDT_CONFIG_LOG_ENABLED 0
#endif
// <o> NRFX_WDT_CONFIG_LOG_LEVEL - Default severity level.
// <0=> Off
// <1=> Error
// <2=> Warning
// <3=> Info
// <4=> Debug
#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
#define NRFX_WDT_CONFIG_LOG_LEVEL 3
#endif
// <o> NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_WDT_CONFIG_INFO_COLOR
#define NRFX_WDT_CONFIG_INFO_COLOR 0
#endif
// <o> NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
// <0=> Default
// <1=> Black
// <2=> Red
// <3=> Green
// <4=> Yellow
// <5=> Blue
// <6=> Magenta
// <7=> Cyan
// <8=> White
#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
#endif
// </e>
// </e>
// </h>
#endif // NRFX_CONFIG_NRF5340_NETWORK_H__