|  | /* | 
|  | * Copyright (c) 2024, Basalte bv | 
|  | * | 
|  | * SPDX-License-Identifier: Apache-2.0 | 
|  | */ | 
|  |  | 
|  | #define DT_DRV_COMPAT nxp_imx_ecspi | 
|  |  | 
|  | #include <zephyr/logging/log.h> | 
|  | LOG_MODULE_REGISTER(spi_mcux_ecspi, CONFIG_SPI_LOG_LEVEL); | 
|  |  | 
|  | #include <zephyr/device.h> | 
|  | #include <zephyr/drivers/clock_control.h> | 
|  | #include <zephyr/drivers/pinctrl.h> | 
|  | #include <zephyr/drivers/spi.h> | 
|  | #include <zephyr/drivers/spi/rtio.h> | 
|  | #include <fsl_ecspi.h> | 
|  |  | 
|  | #include "spi_context.h" | 
|  |  | 
|  | #define SPI_MCUX_ECSPI_MAX_BURST 4096 | 
|  |  | 
|  | struct spi_mcux_config { | 
|  | ECSPI_Type *base; | 
|  | const struct pinctrl_dev_config *pincfg; | 
|  | const struct device *clock_dev; | 
|  | clock_control_subsys_t clock_subsys; | 
|  | void (*irq_config_func)(const struct device *dev); | 
|  | }; | 
|  |  | 
|  | struct spi_mcux_data { | 
|  | ecspi_master_handle_t handle; | 
|  | struct spi_context ctx; | 
|  |  | 
|  | uint16_t dfs; | 
|  | uint16_t word_size; | 
|  |  | 
|  | uint32_t rx_data; | 
|  | uint32_t tx_data; | 
|  | }; | 
|  |  | 
|  | static inline uint16_t bytes_per_word(uint16_t bits_per_word) | 
|  | { | 
|  | if (bits_per_word <= 8U) { | 
|  | return 1U; | 
|  | } | 
|  | if (bits_per_word <= 16U) { | 
|  | return 2U; | 
|  | } | 
|  |  | 
|  | return 4U; | 
|  | } | 
|  |  | 
|  | static void spi_mcux_transfer_next_packet(const struct device *dev) | 
|  | { | 
|  | const struct spi_mcux_config *config = dev->config; | 
|  | struct spi_mcux_data *data = dev->data; | 
|  | ECSPI_Type *base = config->base; | 
|  | struct spi_context *ctx = &data->ctx; | 
|  | ecspi_transfer_t transfer; | 
|  | status_t status; | 
|  |  | 
|  | if ((ctx->tx_len == 0) && (ctx->rx_len == 0)) { | 
|  | /* nothing left to rx or tx, we're done! */ | 
|  | spi_context_cs_control(&data->ctx, false); | 
|  | spi_context_complete(&data->ctx, dev, 0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | transfer.channel = ctx->config->slave; | 
|  |  | 
|  | if (spi_context_rx_buf_on(ctx)) { | 
|  | transfer.rxData = &data->rx_data; | 
|  | } else { | 
|  | transfer.rxData = NULL; | 
|  | } | 
|  |  | 
|  | if (spi_context_tx_buf_on(ctx)) { | 
|  | switch (data->dfs) { | 
|  | case 1U: | 
|  | data->tx_data = UNALIGNED_GET((uint8_t *)ctx->tx_buf); | 
|  | break; | 
|  | case 2U: | 
|  | data->tx_data = UNALIGNED_GET((uint16_t *)ctx->tx_buf); | 
|  | break; | 
|  | case 4U: | 
|  | data->tx_data = UNALIGNED_GET((uint32_t *)ctx->tx_buf); | 
|  | break; | 
|  | } | 
|  |  | 
|  | transfer.txData = &data->tx_data; | 
|  | } else { | 
|  | transfer.txData = NULL; | 
|  | } | 
|  |  | 
|  | /* Burst length is set in the configure step */ | 
|  | transfer.dataSize = 1; | 
|  |  | 
|  | status = ECSPI_MasterTransferNonBlocking(base, &data->handle, &transfer); | 
|  | if (status != kStatus_Success) { | 
|  | LOG_ERR("Transfer could not start"); | 
|  | spi_context_cs_control(&data->ctx, false); | 
|  | spi_context_complete(&data->ctx, dev, -EIO); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void spi_mcux_isr(const struct device *dev) | 
|  | { | 
|  | const struct spi_mcux_config *config = dev->config; | 
|  | struct spi_mcux_data *data = dev->data; | 
|  | ECSPI_Type *base = config->base; | 
|  |  | 
|  | ECSPI_MasterTransferHandleIRQ(base, &data->handle); | 
|  | } | 
|  |  | 
|  | static void spi_mcux_master_transfer_callback(ECSPI_Type *base, ecspi_master_handle_t *handle, | 
|  | status_t status, void *user_data) | 
|  | { | 
|  | const struct device *dev = (const struct device *)user_data; | 
|  | struct spi_mcux_data *data = dev->data; | 
|  |  | 
|  | if (spi_context_rx_buf_on(&data->ctx)) { | 
|  | switch (data->dfs) { | 
|  | case 1: | 
|  | UNALIGNED_PUT(data->rx_data, (uint8_t *)data->ctx.rx_buf); | 
|  | break; | 
|  | case 2: | 
|  | UNALIGNED_PUT(data->rx_data, (uint16_t *)data->ctx.rx_buf); | 
|  | break; | 
|  | case 4: | 
|  | UNALIGNED_PUT(data->rx_data, (uint32_t *)data->ctx.rx_buf); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | spi_context_update_tx(&data->ctx, data->dfs, 1); | 
|  | spi_context_update_rx(&data->ctx, data->dfs, 1); | 
|  |  | 
|  | spi_mcux_transfer_next_packet(dev); | 
|  | } | 
|  |  | 
|  | static int spi_mcux_configure(const struct device *dev, | 
|  | const struct spi_config *spi_cfg) | 
|  | { | 
|  | const struct spi_mcux_config *config = dev->config; | 
|  | struct spi_mcux_data *data = dev->data; | 
|  | ECSPI_Type *base = config->base; | 
|  | ecspi_master_config_t master_config; | 
|  | uint32_t clock_freq; | 
|  | uint16_t word_size; | 
|  |  | 
|  | if (spi_context_configured(&data->ctx, spi_cfg)) { | 
|  | /* This configuration is already in use */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (spi_cfg->operation & SPI_HALF_DUPLEX) { | 
|  | LOG_ERR("Half-duplex not supported"); | 
|  | return -ENOTSUP; | 
|  | } | 
|  |  | 
|  | if (spi_cfg->operation & SPI_TRANSFER_LSB) { | 
|  | LOG_ERR("HW byte re-ordering not supported"); | 
|  | return -ENOTSUP; | 
|  | } | 
|  |  | 
|  | if (!spi_cs_is_gpio(spi_cfg) && spi_cfg->slave > kECSPI_Channel3) { | 
|  | LOG_ERR("Slave %d is greater than %d", spi_cfg->slave, kECSPI_Channel3); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (clock_control_get_rate(config->clock_dev, config->clock_subsys, &clock_freq)) { | 
|  | LOG_ERR("Failed to get clock rate"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | word_size = SPI_WORD_SIZE_GET(spi_cfg->operation); | 
|  | if (0 == word_size || word_size > 32) { | 
|  | LOG_ERR("Invalid word size (0 < %d <= 32)", word_size); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ECSPI_MasterGetDefaultConfig(&master_config); | 
|  |  | 
|  | master_config.channel = | 
|  | spi_cs_is_gpio(spi_cfg) ? kECSPI_Channel0 : (ecspi_channel_source_t)spi_cfg->slave; | 
|  | master_config.channelConfig.polarity = | 
|  | (SPI_MODE_GET(spi_cfg->operation) & SPI_MODE_CPOL) | 
|  | ? kECSPI_PolarityActiveLow | 
|  | : kECSPI_PolarityActiveHigh; | 
|  | master_config.channelConfig.phase = | 
|  | (SPI_MODE_GET(spi_cfg->operation) & SPI_MODE_CPHA) | 
|  | ? kECSPI_ClockPhaseSecondEdge | 
|  | : kECSPI_ClockPhaseFirstEdge; | 
|  | master_config.baudRate_Bps = spi_cfg->frequency; | 
|  | master_config.burstLength = word_size; | 
|  |  | 
|  | master_config.enableLoopback = (SPI_MODE_GET(spi_cfg->operation) & SPI_MODE_LOOP); | 
|  |  | 
|  | if (!spi_cs_is_gpio(spi_cfg)) { | 
|  | uint32_t clock_cycles = | 
|  | DIV_ROUND_UP(spi_cfg->cs.delay * USEC_PER_SEC, spi_cfg->frequency); | 
|  |  | 
|  | if (clock_cycles > 63U) { | 
|  | LOG_ERR("CS delay is greater than 63 clock cycles (%u)", clock_cycles); | 
|  | return -EINVAL; | 
|  | } | 
|  | master_config.chipSelectDelay = (uint8_t)clock_cycles; | 
|  | } | 
|  |  | 
|  | ECSPI_MasterInit(base, &master_config, clock_freq); | 
|  | ECSPI_MasterTransferCreateHandle(base, &data->handle, | 
|  | spi_mcux_master_transfer_callback, | 
|  | (void *)dev); | 
|  |  | 
|  | data->word_size = word_size; | 
|  | data->dfs = bytes_per_word(word_size); | 
|  | data->ctx.config = spi_cfg; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int transceive(const struct device *dev, | 
|  | const struct spi_config *spi_cfg, | 
|  | const struct spi_buf_set *tx_bufs, | 
|  | const struct spi_buf_set *rx_bufs, | 
|  | bool asynchronous, | 
|  | spi_callback_t cb, | 
|  | void *userdata) | 
|  | { | 
|  | struct spi_mcux_data *data = dev->data; | 
|  | int ret; | 
|  |  | 
|  | spi_context_lock(&data->ctx, asynchronous, cb, userdata, spi_cfg); | 
|  |  | 
|  | ret = spi_mcux_configure(dev, spi_cfg); | 
|  | if (ret) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | spi_context_buffers_setup(&data->ctx, tx_bufs, rx_bufs, data->dfs); | 
|  | spi_context_cs_control(&data->ctx, true); | 
|  |  | 
|  | spi_mcux_transfer_next_packet(dev); | 
|  | ret = spi_context_wait_for_completion(&data->ctx); | 
|  |  | 
|  | out: | 
|  | spi_context_release(&data->ctx, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int spi_mcux_transceive(const struct device *dev, | 
|  | const struct spi_config *spi_cfg, | 
|  | const struct spi_buf_set *tx_bufs, | 
|  | const struct spi_buf_set *rx_bufs) | 
|  | { | 
|  | return transceive(dev, spi_cfg, tx_bufs, rx_bufs, false, NULL, NULL); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SPI_ASYNC | 
|  | static int spi_mcux_transceive_async(const struct device *dev, | 
|  | const struct spi_config *spi_cfg, | 
|  | const struct spi_buf_set *tx_bufs, | 
|  | const struct spi_buf_set *rx_bufs, | 
|  | spi_callback_t cb, | 
|  | void *userdata) | 
|  | { | 
|  | return transceive(dev, spi_cfg, tx_bufs, rx_bufs, true, cb, userdata); | 
|  | } | 
|  | #endif /* CONFIG_SPI_ASYNC */ | 
|  |  | 
|  | static int spi_mcux_release(const struct device *dev, const struct spi_config *spi_cfg) | 
|  | { | 
|  | struct spi_mcux_data *data = dev->data; | 
|  |  | 
|  | ARG_UNUSED(spi_cfg); | 
|  |  | 
|  | spi_context_unlock_unconditionally(&data->ctx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int spi_mcux_init(const struct device *dev) | 
|  | { | 
|  | int ret; | 
|  | const struct spi_mcux_config *config = dev->config; | 
|  | struct spi_mcux_data *data = dev->data; | 
|  |  | 
|  | config->irq_config_func(dev); | 
|  |  | 
|  | ret = spi_context_cs_configure_all(&data->ctx); | 
|  | if (ret < 0) { | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT); | 
|  | if (ret < 0) { | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | spi_context_unlock_unconditionally(&data->ctx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static DEVICE_API(spi, spi_mcux_driver_api) = { | 
|  | .transceive = spi_mcux_transceive, | 
|  | #ifdef CONFIG_SPI_ASYNC | 
|  | .transceive_async = spi_mcux_transceive_async, | 
|  | #endif | 
|  | #ifdef CONFIG_SPI_RTIO | 
|  | .iodev_submit = spi_rtio_iodev_default_submit, | 
|  | #endif | 
|  | .release = spi_mcux_release, | 
|  | }; | 
|  |  | 
|  | #define SPI_MCUX_ECSPI_INIT(n)									\ | 
|  | PINCTRL_DT_INST_DEFINE(n);								\ | 
|  | static void spi_mcux_config_func_##n(const struct device *dev);				\ | 
|  | \ | 
|  | static const struct spi_mcux_config spi_mcux_config_##n = {				\ | 
|  | .base = (ECSPI_Type *) DT_INST_REG_ADDR(n),					\ | 
|  | .pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n),					\ | 
|  | .clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(n)),				\ | 
|  | .clock_subsys = (clock_control_subsys_t)DT_INST_CLOCKS_CELL(n, name),		\ | 
|  | .irq_config_func = spi_mcux_config_func_##n,					\ | 
|  | };											\ | 
|  | \ | 
|  | static struct spi_mcux_data spi_mcux_data_##n = {					\ | 
|  | SPI_CONTEXT_INIT_LOCK(spi_mcux_data_##n, ctx),					\ | 
|  | SPI_CONTEXT_INIT_SYNC(spi_mcux_data_##n, ctx),					\ | 
|  | SPI_CONTEXT_CS_GPIOS_INITIALIZE(DT_DRV_INST(n), ctx)				\ | 
|  | };											\ | 
|  | \ | 
|  | SPI_DEVICE_DT_INST_DEFINE(n, spi_mcux_init, NULL,					\ | 
|  | &spi_mcux_data_##n, &spi_mcux_config_##n,				\ | 
|  | POST_KERNEL, CONFIG_SPI_INIT_PRIORITY,				\ | 
|  | &spi_mcux_driver_api);						\ | 
|  | \ | 
|  | static void spi_mcux_config_func_##n(const struct device *dev)				\ | 
|  | {											\ | 
|  | IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority),				\ | 
|  | spi_mcux_isr, DEVICE_DT_INST_GET(n), 0);				\ | 
|  | \ | 
|  | irq_enable(DT_INST_IRQN(n));							\ | 
|  | } | 
|  |  | 
|  | DT_INST_FOREACH_STATUS_OKAY(SPI_MCUX_ECSPI_INIT) |