| This is a sample app which drives a servo motor using |
| This app is targeted for servo motor ROB-09065. With the |
| PWM control signal, the servo motor can rotate to any |
| angle between 0 and 180 degrees. The corresponding PWM |
| pulse width is between 700 micro seconds and 2300 micro |
| seconds. The motor is programmed to rotate back and forth |
| Since different servo motors may require different PWM |
| pulse width, you may need to modify the pulse width in |
| the app if you are using a different servo motor. |
| Arduino 101 and Quark D2000 CRB |
| ------------------------------- |
| You will need to connect the motor's red wire to 5v, |
| the black wire to ground and the white wire to PWM 0 via |
| This sample can be built for multiple boards, in this example we will build it |
| for the arduino_101 board: |
| $ cd samples/basic/servo_motor |
| $ make BOARD=arduino_101 flash |
