blob: 4db69bccb4e6f715530b8c62b471830e7b78a853 [file] [log] [blame]
/*
* Copyright (c) 2021, NXP
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nxp_lpc_i2s
#include <string.h>
#include <zephyr/drivers/dma.h>
#include <zephyr/drivers/i2s.h>
#include <zephyr/drivers/clock_control.h>
#include <fsl_i2s.h>
#include <fsl_dma.h>
#include <zephyr/logging/log.h>
#include <zephyr/irq.h>
#include <zephyr/drivers/pinctrl.h>
LOG_MODULE_REGISTER(i2s_mcux_flexcomm);
#define NUM_DMA_BLOCKS 2
/* Device constant configuration parameters */
struct i2s_mcux_config {
I2S_Type *base;
const struct device *clock_dev;
clock_control_subsys_t clock_subsys;
void (*irq_config)(const struct device *dev);
const struct pinctrl_dev_config *pincfg;
};
struct stream {
int32_t state;
const struct device *dev_dma;
uint32_t channel; /* stores the channel for dma */
struct i2s_config cfg;
struct dma_config dma_cfg;
struct dma_block_config dma_block[NUM_DMA_BLOCKS];
bool last_block;
struct k_msgq in_queue;
void *in_msgs[CONFIG_I2S_MCUX_FLEXCOMM_RX_BLOCK_COUNT];
struct k_msgq out_queue;
void *out_msgs[CONFIG_I2S_MCUX_FLEXCOMM_TX_BLOCK_COUNT];
};
struct i2s_mcux_data {
struct stream rx;
struct stream tx;
};
static int i2s_mcux_flexcomm_cfg_convert(uint32_t base_frequency,
enum i2s_dir dir,
const struct i2s_config *i2s_cfg,
i2s_config_t *fsl_cfg)
{
if (dir == I2S_DIR_RX) {
I2S_RxGetDefaultConfig(fsl_cfg);
} else if (dir == I2S_DIR_TX) {
I2S_TxGetDefaultConfig(fsl_cfg);
}
/* Support single channel pair */
if (i2s_cfg->channels == 0 || i2s_cfg->channels > 2) {
LOG_ERR("unsupported number of channels");
return -EINVAL;
}
fsl_cfg->oneChannel = (i2s_cfg->channels == 1);
fsl_cfg->dataLength = i2s_cfg->word_size;
fsl_cfg->frameLength = i2s_cfg->channels * i2s_cfg->word_size;
/* Set master/slave configuration */
switch (i2s_cfg->options & (I2S_OPT_BIT_CLK_SLAVE |
I2S_OPT_FRAME_CLK_SLAVE)) {
case I2S_OPT_BIT_CLK_MASTER | I2S_OPT_FRAME_CLK_MASTER:
fsl_cfg->masterSlave = kI2S_MasterSlaveNormalMaster;
break;
case I2S_OPT_BIT_CLK_SLAVE | I2S_OPT_FRAME_CLK_SLAVE:
fsl_cfg->masterSlave = kI2S_MasterSlaveNormalSlave;
break;
case I2S_OPT_BIT_CLK_SLAVE | I2S_OPT_FRAME_CLK_MASTER:
/* Master using external CLK */
fsl_cfg->masterSlave = kI2S_MasterSlaveExtSckMaster;
break;
case I2S_OPT_BIT_CLK_MASTER | I2S_OPT_FRAME_CLK_SLAVE:
/* WS synchronized master */
fsl_cfg->masterSlave = kI2S_MasterSlaveWsSyncMaster;
break;
}
/*
* Set format. Zephyr choose arbitrary subset of possible
* formats, the mapping below is not tested for anything
* but classic mode and is not guaranteed to be correct.
*/
switch (i2s_cfg->format & I2S_FMT_DATA_FORMAT_MASK) {
case I2S_FMT_DATA_FORMAT_I2S:
fsl_cfg->mode = kI2S_ModeI2sClassic;
break;
case I2S_FMT_DATA_FORMAT_PCM_SHORT:
fsl_cfg->mode = kI2S_ModeDspWsShort;
fsl_cfg->wsPol = true;
break;
case I2S_FMT_DATA_FORMAT_PCM_LONG:
fsl_cfg->mode = kI2S_ModeDspWsLong;
fsl_cfg->wsPol = true;
break;
case I2S_FMT_DATA_FORMAT_LEFT_JUSTIFIED:
fsl_cfg->mode = kI2S_ModeDspWs50;
fsl_cfg->wsPol = true;
break;
case I2S_FMT_DATA_FORMAT_RIGHT_JUSTIFIED:
fsl_cfg->mode = kI2S_ModeDspWs50;
fsl_cfg->wsPol = true;
break;
default:
LOG_ERR("Unsupported I2S data format");
return -EINVAL;
}
if (fsl_cfg->masterSlave == kI2S_MasterSlaveNormalMaster ||
fsl_cfg->masterSlave == kI2S_MasterSlaveWsSyncMaster) {
fsl_cfg->divider = base_frequency /
i2s_cfg->frame_clk_freq /
fsl_cfg->frameLength;
}
/*
* Set frame and bit clock polarity according to
* inversion flags.
*/
switch (i2s_cfg->format & I2S_FMT_CLK_FORMAT_MASK) {
case I2S_FMT_CLK_NF_NB:
break;
case I2S_FMT_CLK_NF_IB:
fsl_cfg->sckPol = !fsl_cfg->sckPol;
break;
case I2S_FMT_CLK_IF_NB:
fsl_cfg->wsPol = !fsl_cfg->wsPol;
break;
case I2S_FMT_CLK_IF_IB:
fsl_cfg->sckPol = !fsl_cfg->sckPol;
fsl_cfg->wsPol = !fsl_cfg->wsPol;
break;
default:
LOG_ERR("Unsupported clocks polarity");
return -EINVAL;
}
return 0;
}
static const struct i2s_config *i2s_mcux_config_get(const struct device *dev,
enum i2s_dir dir)
{
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream;
if (dir == I2S_DIR_RX) {
stream = &dev_data->rx;
} else {
stream = &dev_data->tx;
}
if (stream->state == I2S_STATE_NOT_READY) {
return NULL;
}
return &stream->cfg;
}
static int i2s_mcux_configure(const struct device *dev, enum i2s_dir dir,
const struct i2s_config *i2s_cfg)
{
const struct i2s_mcux_config *cfg = dev->config;
struct i2s_mcux_data *dev_data = dev->data;
I2S_Type *base = cfg->base;
struct stream *stream;
uint32_t base_frequency;
i2s_config_t fsl_cfg;
int result;
uint8_t bits_per_word = 0;
uint8_t bytes_per_word = 0;
if (dir == I2S_DIR_RX) {
stream = &dev_data->rx;
} else if (dir == I2S_DIR_TX) {
stream = &dev_data->tx;
} else if (dir == I2S_DIR_BOTH) {
return -ENOSYS;
} else {
LOG_ERR("Either RX or TX direction must be selected");
return -EINVAL;
}
if (stream->state != I2S_STATE_NOT_READY &&
stream->state != I2S_STATE_READY) {
LOG_ERR("invalid state");
return -EINVAL;
}
if (i2s_cfg->frame_clk_freq == 0U) {
stream->state = I2S_STATE_NOT_READY;
return 0;
}
/*
* The memory block passed by the user to the i2s_write function is
* tightly packed next to each other.
* However for 8-bit word_size the I2S hardware expects the data
* to be in 2bytes which does not match what is passed by the user.
* This will be addressed in a separate PR once the zephyr API committee
* finalizes on an I2S API for the user to probe hardware variations.
*/
if (i2s_cfg->word_size <= 8) {
return -ENOTSUP;
}
if (!device_is_ready(cfg->clock_dev)) {
LOG_ERR("clock control device not ready");
return -ENODEV;
}
/* Figure out function base clock */
if (clock_control_get_rate(cfg->clock_dev,
cfg->clock_subsys, &base_frequency)) {
return -EINVAL;
}
/*
* Validate the configuration by converting it to SDK
* format.
*/
result = i2s_mcux_flexcomm_cfg_convert(base_frequency, dir, i2s_cfg,
&fsl_cfg);
if (result != 0) {
return result;
}
/* Apply the configuration */
if (dir == I2S_DIR_RX) {
I2S_RxInit(cfg->base, &fsl_cfg);
} else {
I2S_TxInit(cfg->base, &fsl_cfg);
}
/* Data length in bits */
bits_per_word = (uint8_t)(((base->CFG1 & I2S_CFG1_DATALEN_MASK) >>
I2S_CFG1_DATALEN_SHIFT) + 1U);
/* Convert to bytes */
bytes_per_word = (bits_per_word + 7U) / 8U;
/* if one channel is disabled, bytes_per_word should be 4U, user should
* pay attention that when data length is shorter than 16,
* the data format: left data put in 0-15 bit and right data should put in 16-31
*/
if (((base->CFG1 & I2S_CFG1_ONECHANNEL_MASK) == 0U)) {
bytes_per_word = 4U;
}
/* since DMA do not support 24bit transfer width, use 32bit instead */
if (bytes_per_word == 3U) {
bytes_per_word = 4U;
}
stream->dma_cfg.dest_data_size = bytes_per_word;
/* Save configuration for get_config */
memcpy(&stream->cfg, i2s_cfg, sizeof(struct i2s_config));
stream->state = I2S_STATE_READY;
return 0;
}
static inline void i2s_purge_stream_buffers(struct stream *stream,
struct k_mem_slab *mem_slab)
{
void *buffer;
while (k_msgq_get(&stream->in_queue, &buffer, K_NO_WAIT) == 0) {
k_mem_slab_free(mem_slab, &buffer);
}
while (k_msgq_get(&stream->out_queue, &buffer, K_NO_WAIT) == 0) {
k_mem_slab_free(mem_slab, &buffer);
}
}
static void i2s_mcux_tx_stream_disable(const struct device *dev, bool drop)
{
const struct i2s_mcux_config *cfg = dev->config;
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->tx;
I2S_Type *base = cfg->base;
LOG_DBG("Stopping DMA channel %u for TX stream", stream->channel);
dma_stop(stream->dev_dma, stream->channel);
/* Clear TX error interrupt flag */
base->FIFOSTAT = I2S_FIFOSTAT_TXERR(1U);
I2S_DisableInterrupts(base, (uint32_t)kI2S_TxErrorFlag);
if (base->CFG1 & I2S_CFG1_MAINENABLE_MASK) {
/* Wait until all transmitted data get out of FIFO */
while ((base->FIFOSTAT & I2S_FIFOSTAT_TXEMPTY_MASK) == 0U) {
}
/*
* The last piece of valid data can be still being transmitted from
* I2S at this moment
*/
/* Write additional data to FIFO */
base->FIFOWR = 0U;
while ((base->FIFOSTAT & I2S_FIFOSTAT_TXEMPTY_MASK) == 0U) {
}
/* At this moment the additional data is out of FIFO, we can stop I2S */
/* Disable TX DMA */
base->FIFOCFG &= (~I2S_FIFOCFG_DMATX_MASK);
base->FIFOCFG |= I2S_FIFOCFG_EMPTYTX_MASK;
I2S_Disable(base);
}
/* purge buffers queued in the stream */
if (drop) {
i2s_purge_stream_buffers(stream, stream->cfg.mem_slab);
}
}
static void i2s_mcux_rx_stream_disable(const struct device *dev, bool drop)
{
const struct i2s_mcux_config *cfg = dev->config;
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->rx;
I2S_Type *base = cfg->base;
LOG_DBG("Stopping DMA channel %u for RX stream", stream->channel);
dma_stop(stream->dev_dma, stream->channel);
/* Clear RX error interrupt flag */
base->FIFOSTAT = I2S_FIFOSTAT_RXERR(1U);
I2S_DisableInterrupts(base, (uint32_t)kI2S_RxErrorFlag);
/* stop transfer */
/* Disable Rx DMA */
base->FIFOCFG &= (~I2S_FIFOCFG_DMARX_MASK);
base->FIFOCFG |= I2S_FIFOCFG_EMPTYRX_MASK;
I2S_Disable(base);
/* purge buffers queued in the stream */
if (drop) {
i2s_purge_stream_buffers(stream, stream->cfg.mem_slab);
}
}
static void i2s_mcux_config_dma_blocks(const struct device *dev,
enum i2s_dir dir, uint32_t *buffer)
{
const struct i2s_mcux_config *cfg = dev->config;
struct i2s_mcux_data *dev_data = dev->data;
I2S_Type *base = cfg->base;
struct dma_block_config *blk_cfg;
struct stream *stream;
if (dir == I2S_DIR_RX) {
stream = &dev_data->rx;
} else {
stream = &dev_data->tx;
}
blk_cfg = &stream->dma_block[0];
memset(blk_cfg, 0, sizeof(struct dma_block_config));
if (dir == I2S_DIR_RX) {
blk_cfg->source_address = (uint32_t)&base->FIFORD;
blk_cfg->dest_address = (uint32_t)buffer[0];
blk_cfg->block_size = stream->cfg.block_size;
blk_cfg->source_gather_en = 1;
blk_cfg->next_block = &stream->dma_block[1];
blk_cfg = &stream->dma_block[1];
memset(blk_cfg, 0, sizeof(struct dma_block_config));
blk_cfg->source_address = (uint32_t)&base->FIFORD;
blk_cfg->dest_address = (uint32_t)buffer[1];
blk_cfg->block_size = stream->cfg.block_size;
stream->dma_cfg.block_count = NUM_DMA_BLOCKS;
} else {
blk_cfg->dest_address = (uint32_t)&base->FIFOWR;
blk_cfg->source_address = (uint32_t)buffer;
blk_cfg->block_size = stream->cfg.block_size;
stream->dma_cfg.block_count = 1;
}
stream->dma_cfg.head_block = &stream->dma_block[0];
stream->dma_cfg.user_data = (void *)dev;
dma_config(stream->dev_dma, stream->channel, &stream->dma_cfg);
LOG_DBG("dma_slot is %d", stream->dma_cfg.dma_slot);
LOG_DBG("channel_direction is %d", stream->dma_cfg.channel_direction);
LOG_DBG("complete_callback_en is %d",
stream->dma_cfg.complete_callback_en);
LOG_DBG("error_callback_en is %d", stream->dma_cfg.error_callback_en);
LOG_DBG("source_handshake is %d", stream->dma_cfg.source_handshake);
LOG_DBG("dest_handshake is %d", stream->dma_cfg.dest_handshake);
LOG_DBG("channel_priority is %d", stream->dma_cfg.channel_priority);
LOG_DBG("source_chaining_en is %d", stream->dma_cfg.source_chaining_en);
LOG_DBG("dest_chaining_en is %d", stream->dma_cfg.dest_chaining_en);
LOG_DBG("linked_channel is %d", stream->dma_cfg.linked_channel);
LOG_DBG("source_data_size is %d", stream->dma_cfg.source_data_size);
LOG_DBG("dest_data_size is %d", stream->dma_cfg.dest_data_size);
LOG_DBG("source_burst_length is %d", stream->dma_cfg.source_burst_length);
LOG_DBG("dest_burst_length is %d", stream->dma_cfg.dest_burst_length);
LOG_DBG("block_count is %d", stream->dma_cfg.block_count);
}
/* This function is executed in the interrupt context */
static void i2s_mcux_dma_tx_callback(const struct device *dma_dev, void *arg,
uint32_t channel, int status)
{
const struct device *dev = (const struct device *)arg;
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->tx;
void *buffer;
int ret;
LOG_DBG("tx cb: %d", stream->state);
ret = k_msgq_get(&stream->out_queue, &buffer, K_NO_WAIT);
if (ret == 0) {
/* transmission complete. free the buffer */
k_mem_slab_free(stream->cfg.mem_slab, &buffer);
} else {
LOG_ERR("no buffer in output queue for channel %u", channel);
}
/* Received a STOP trigger, terminate TX immediately */
if (stream->last_block) {
stream->state = I2S_STATE_READY;
i2s_mcux_tx_stream_disable(dev, false);
LOG_DBG("TX STOPPED");
return;
}
switch (stream->state) {
case I2S_STATE_RUNNING:
case I2S_STATE_STOPPING:
/* get the next buffer from queue */
ret = k_msgq_get(&stream->in_queue, &buffer, K_NO_WAIT);
if (ret == 0) {
/* config the DMA */
i2s_mcux_config_dma_blocks(dev, I2S_DIR_TX, (uint32_t *)buffer);
k_msgq_put(&stream->out_queue, &buffer, K_NO_WAIT);
dma_start(stream->dev_dma, stream->channel);
}
if (ret || status < 0) {
/*
* DMA encountered an error (status < 0)
* or
* No buffers in input queue
*/
LOG_DBG("DMA status %08x channel %u k_msgq_get ret %d",
status, channel, ret);
if (stream->state == I2S_STATE_STOPPING) {
stream->state = I2S_STATE_READY;
} else {
stream->state = I2S_STATE_ERROR;
}
i2s_mcux_tx_stream_disable(dev, false);
}
break;
case I2S_STATE_ERROR:
i2s_mcux_tx_stream_disable(dev, true);
break;
}
}
static void i2s_mcux_dma_rx_callback(const struct device *dma_dev, void *arg,
uint32_t channel, int status)
{
const struct device *dev = (const struct device *)arg;
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->rx;
void *buffer;
int ret;
LOG_DBG("rx cb: %d", stream->state);
if (status < 0) {
stream->state = I2S_STATE_ERROR;
i2s_mcux_rx_stream_disable(dev, false);
return;
}
switch (stream->state) {
case I2S_STATE_STOPPING:
case I2S_STATE_RUNNING:
/* retrieve buffer from input queue */
ret = k_msgq_get(&stream->in_queue, &buffer, K_NO_WAIT);
__ASSERT_NO_MSG(ret == 0);
/* put buffer to output queue */
ret = k_msgq_put(&stream->out_queue, &buffer, K_NO_WAIT);
if (ret != 0) {
LOG_ERR("buffer %p -> out_queue %p err %d", buffer,
&stream->out_queue, ret);
i2s_mcux_rx_stream_disable(dev, false);
stream->state = I2S_STATE_ERROR;
}
if (stream->state == I2S_STATE_RUNNING) {
/* allocate new buffer for next audio frame */
ret = k_mem_slab_alloc(stream->cfg.mem_slab, &buffer, K_NO_WAIT);
if (ret != 0) {
LOG_ERR("buffer alloc from slab %p err %d",
stream->cfg.mem_slab, ret);
i2s_mcux_rx_stream_disable(dev, false);
stream->state = I2S_STATE_ERROR;
} else {
const struct i2s_mcux_config *cfg = dev->config;
I2S_Type *base = cfg->base;
dma_reload(stream->dev_dma, stream->channel,
(uint32_t)&base->FIFORD, (uint32_t)buffer,
stream->cfg.block_size);
/* put buffer in input queue */
ret = k_msgq_put(&stream->in_queue, &buffer, K_NO_WAIT);
if (ret != 0) {
LOG_ERR("buffer %p -> in_queue %p err %d",
buffer, &stream->in_queue, ret);
}
dma_start(stream->dev_dma, stream->channel);
}
} else {
/* Received a STOP/DRAIN trigger */
i2s_mcux_rx_stream_disable(dev, true);
stream->state = I2S_STATE_READY;
}
break;
case I2S_STATE_ERROR:
i2s_mcux_rx_stream_disable(dev, true);
break;
}
}
static int i2s_mcux_tx_stream_start(const struct device *dev)
{
int ret = 0;
void *buffer;
const struct i2s_mcux_config *cfg = dev->config;
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->tx;
I2S_Type *base = cfg->base;
/* retrieve buffer from input queue */
ret = k_msgq_get(&stream->in_queue, &buffer, K_NO_WAIT);
if (ret != 0) {
LOG_ERR("No buffer in input queue to start transmission");
return ret;
}
i2s_mcux_config_dma_blocks(dev, I2S_DIR_TX, (uint32_t *)buffer);
/* put buffer in output queue */
ret = k_msgq_put(&stream->out_queue, &buffer, K_NO_WAIT);
if (ret != 0) {
LOG_ERR("failed to put buffer in output queue");
return ret;
}
/* Enable TX DMA */
base->FIFOCFG |= I2S_FIFOCFG_DMATX_MASK;
ret = dma_start(stream->dev_dma, stream->channel);
if (ret < 0) {
LOG_ERR("dma_start failed (%d)", ret);
return ret;
}
I2S_Enable(base);
I2S_EnableInterrupts(base, (uint32_t)kI2S_TxErrorFlag);
return 0;
}
static int i2s_mcux_rx_stream_start(const struct device *dev)
{
int ret = 0;
void *buffer[NUM_DMA_BLOCKS];
const struct i2s_mcux_config *cfg = dev->config;
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->rx;
I2S_Type *base = cfg->base;
uint8_t num_of_bufs;
num_of_bufs = k_mem_slab_num_free_get(stream->cfg.mem_slab);
/*
* Need at least two buffers on the RX memory slab for
* reliable DMA reception.
*/
if (num_of_bufs <= 1) {
return -EINVAL;
}
for (int i = 0; i < NUM_DMA_BLOCKS; i++) {
ret = k_mem_slab_alloc(stream->cfg.mem_slab, &buffer[i],
K_NO_WAIT);
if (ret != 0) {
LOG_ERR("buffer alloc from mem_slab failed (%d)", ret);
return ret;
}
}
i2s_mcux_config_dma_blocks(dev, I2S_DIR_RX, (uint32_t *)buffer);
/* put buffers in input queue */
for (int i = 0; i < NUM_DMA_BLOCKS; i++) {
ret = k_msgq_put(&stream->in_queue, &buffer[i], K_NO_WAIT);
if (ret != 0) {
LOG_ERR("failed to put buffer in input queue");
return ret;
}
}
/* Enable RX DMA */
base->FIFOCFG |= I2S_FIFOCFG_DMARX_MASK;
ret = dma_start(stream->dev_dma, stream->channel);
if (ret < 0) {
LOG_ERR("Failed to start DMA Ch%d (%d)", stream->channel, ret);
return ret;
}
I2S_Enable(base);
I2S_EnableInterrupts(base, (uint32_t)kI2S_RxErrorFlag);
return 0;
}
static int i2s_mcux_trigger(const struct device *dev, enum i2s_dir dir,
enum i2s_trigger_cmd cmd)
{
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream;
unsigned int key;
int ret = 0;
if (dir == I2S_DIR_RX) {
stream = &dev_data->rx;
} else if (dir == I2S_DIR_TX) {
stream = &dev_data->tx;
} else if (dir == I2S_DIR_BOTH) {
return -ENOSYS;
} else {
LOG_ERR("Either RX or TX direction must be selected");
return -EINVAL;
}
key = irq_lock();
switch (cmd) {
case I2S_TRIGGER_START:
if (stream->state != I2S_STATE_READY) {
LOG_ERR("START trigger: invalid state %d",
stream->state);
ret = -EIO;
break;
}
if (dir == I2S_DIR_TX) {
ret = i2s_mcux_tx_stream_start(dev);
} else {
ret = i2s_mcux_rx_stream_start(dev);
}
if (ret < 0) {
LOG_ERR("START trigger failed %d", ret);
break;
}
stream->state = I2S_STATE_RUNNING;
stream->last_block = false;
break;
case I2S_TRIGGER_STOP:
if (stream->state != I2S_STATE_RUNNING) {
LOG_ERR("STOP trigger: invalid state %d", stream->state);
ret = -EIO;
break;
}
stream->state = I2S_STATE_STOPPING;
stream->last_block = true;
break;
case I2S_TRIGGER_DRAIN:
if (stream->state != I2S_STATE_RUNNING) {
LOG_ERR("DRAIN trigger: invalid state %d", stream->state);
ret = -EIO;
break;
}
stream->state = I2S_STATE_STOPPING;
break;
case I2S_TRIGGER_DROP:
if (stream->state == I2S_STATE_NOT_READY) {
LOG_ERR("DROP trigger: invalid state %d", stream->state);
ret = -EIO;
break;
}
stream->state = I2S_STATE_READY;
if (dir == I2S_DIR_TX) {
i2s_mcux_tx_stream_disable(dev, true);
} else {
i2s_mcux_rx_stream_disable(dev, true);
}
break;
case I2S_TRIGGER_PREPARE:
if (stream->state != I2S_STATE_ERROR) {
LOG_ERR("PREPARE trigger: invalid state %d", stream->state);
ret = -EIO;
break;
}
stream->state = I2S_STATE_READY;
if (dir == I2S_DIR_TX) {
i2s_mcux_tx_stream_disable(dev, true);
} else {
i2s_mcux_rx_stream_disable(dev, true);
}
break;
default:
LOG_ERR("Unsupported trigger command");
ret = -EINVAL;
}
irq_unlock(key);
return ret;
}
static int i2s_mcux_read(const struct device *dev, void **mem_block,
size_t *size)
{
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->rx;
void *buffer;
int ret = 0;
if (stream->state == I2S_STATE_NOT_READY) {
LOG_ERR("invalid state %d", stream->state);
return -EIO;
}
ret = k_msgq_get(&stream->out_queue, &buffer,
SYS_TIMEOUT_MS(stream->cfg.timeout));
if (ret != 0) {
if (stream->state == I2S_STATE_ERROR) {
return -EIO;
} else {
return -EAGAIN;
}
}
*mem_block = buffer;
*size = stream->cfg.block_size;
return 0;
}
static int i2s_mcux_write(const struct device *dev, void *mem_block,
size_t size)
{
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->tx;
int ret;
if (stream->state != I2S_STATE_RUNNING &&
stream->state != I2S_STATE_READY) {
LOG_ERR("invalid state (%d)", stream->state);
return -EIO;
}
ret = k_msgq_put(&stream->in_queue, &mem_block,
SYS_TIMEOUT_MS(stream->cfg.timeout));
if (ret) {
LOG_ERR("k_msgq_put failed %d", ret);
return ret;
}
return ret;
}
static const struct i2s_driver_api i2s_mcux_driver_api = {
.configure = i2s_mcux_configure,
.config_get = i2s_mcux_config_get,
.read = i2s_mcux_read,
.write = i2s_mcux_write,
.trigger = i2s_mcux_trigger,
};
static void i2s_mcux_isr(const struct device *dev)
{
const struct i2s_mcux_config *cfg = dev->config;
struct i2s_mcux_data *dev_data = dev->data;
struct stream *stream = &dev_data->tx;
I2S_Type *base = cfg->base;
uint32_t intstat = base->FIFOINTSTAT;
if ((intstat & I2S_FIFOINTSTAT_TXERR_MASK) != 0UL) {
/* Clear TX error interrupt flag */
base->FIFOSTAT = I2S_FIFOSTAT_TXERR(1U);
stream = &dev_data->tx;
stream->state = I2S_STATE_ERROR;
}
if ((intstat & I2S_FIFOINTSTAT_RXERR_MASK) != 0UL) {
/* Clear RX error interrupt flag */
base->FIFOSTAT = I2S_FIFOSTAT_RXERR(1U);
stream = &dev_data->rx;
stream->state = I2S_STATE_ERROR;
}
}
static int i2s_mcux_init(const struct device *dev)
{
const struct i2s_mcux_config *cfg = dev->config;
struct i2s_mcux_data *const data = dev->data;
int err;
err = pinctrl_apply_state(cfg->pincfg, PINCTRL_STATE_DEFAULT);
if (err) {
return err;
}
cfg->irq_config(dev);
/* Initialize the buffer queues */
k_msgq_init(&data->tx.in_queue, (char *)data->tx.in_msgs,
sizeof(void *), CONFIG_I2S_MCUX_FLEXCOMM_TX_BLOCK_COUNT);
k_msgq_init(&data->rx.in_queue, (char *)data->rx.in_msgs,
sizeof(void *), CONFIG_I2S_MCUX_FLEXCOMM_RX_BLOCK_COUNT);
k_msgq_init(&data->tx.out_queue, (char *)data->tx.out_msgs,
sizeof(void *), CONFIG_I2S_MCUX_FLEXCOMM_TX_BLOCK_COUNT);
k_msgq_init(&data->rx.out_queue, (char *)data->rx.out_msgs,
sizeof(void *), CONFIG_I2S_MCUX_FLEXCOMM_RX_BLOCK_COUNT);
if (data->tx.dev_dma != NULL) {
if (!device_is_ready(data->tx.dev_dma)) {
LOG_ERR("%s device not ready", data->tx.dev_dma->name);
return -ENODEV;
}
}
if (data->rx.dev_dma != NULL) {
if (!device_is_ready(data->rx.dev_dma)) {
LOG_ERR("%s device not ready", data->rx.dev_dma->name);
return -ENODEV;
}
}
data->tx.state = I2S_STATE_NOT_READY;
data->rx.state = I2S_STATE_NOT_READY;
LOG_INF("Device %s inited", dev->name);
return 0;
}
#define I2S_DMA_CHANNELS(id) \
.tx = { \
.dev_dma = UTIL_AND( \
DT_INST_DMAS_HAS_NAME(id, tx), \
DEVICE_DT_GET(DT_INST_DMAS_CTLR_BY_NAME(id, tx))), \
.channel = UTIL_AND( \
DT_INST_DMAS_HAS_NAME(id, tx), \
DT_INST_DMAS_CELL_BY_NAME(id, tx, channel)), \
.dma_cfg = { \
.channel_direction = MEMORY_TO_PERIPHERAL, \
.dma_callback = i2s_mcux_dma_tx_callback, \
.source_data_size = 1, \
.block_count = 1, \
} \
}, \
.rx = { \
.dev_dma = UTIL_AND( \
DT_INST_DMAS_HAS_NAME(id, rx), \
DEVICE_DT_GET(DT_INST_DMAS_CTLR_BY_NAME(id, rx))), \
.channel = UTIL_AND( \
DT_INST_DMAS_HAS_NAME(id, rx), \
DT_INST_DMAS_CELL_BY_NAME(id, rx, channel)), \
.dma_cfg = { \
.channel_direction = PERIPHERAL_TO_MEMORY, \
.dma_callback = i2s_mcux_dma_rx_callback, \
.source_data_size = 1, \
.block_count = 1, \
} \
}
#define I2S_MCUX_FLEXCOMM_DEVICE(id) \
PINCTRL_DT_INST_DEFINE(id); \
static void i2s_mcux_config_func_##id(const struct device *dev); \
static const struct i2s_mcux_config i2s_mcux_config_##id = { \
.base = \
(I2S_Type *)DT_INST_REG_ADDR(id), \
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(id)), \
.clock_subsys = \
(clock_control_subsys_t)DT_INST_CLOCKS_CELL(id, name),\
.irq_config = i2s_mcux_config_func_##id, \
.pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(id), \
}; \
static struct i2s_mcux_data i2s_mcux_data_##id = { \
I2S_DMA_CHANNELS(id) \
}; \
DEVICE_DT_INST_DEFINE(id, \
&i2s_mcux_init, \
NULL, \
&i2s_mcux_data_##id, \
&i2s_mcux_config_##id, \
POST_KERNEL, \
CONFIG_I2S_INIT_PRIORITY, \
&i2s_mcux_driver_api); \
static void i2s_mcux_config_func_##id(const struct device *dev) \
{ \
IRQ_CONNECT(DT_INST_IRQN(id), \
DT_INST_IRQ(id, priority), \
i2s_mcux_isr, \
DEVICE_DT_INST_GET(id), \
0); \
irq_enable(DT_INST_IRQN(id)); \
}
DT_INST_FOREACH_STATUS_OKAY(I2S_MCUX_FLEXCOMM_DEVICE)