| /* |
| * Copyright (c) 2018 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #include <kernel.h> |
| #include <errno.h> |
| #include <posix/time.h> |
| #include <posix/sys/time.h> |
| #include <syscall_handler.h> |
| #include <spinlock.h> |
| |
| /* |
| * `k_uptime_get` returns a timestamp based on an always increasing |
| * value from the system start. To support the `CLOCK_REALTIME` |
| * clock, this `rt_clock_base` records the time that the system was |
| * started. This can either be set via 'clock_settime', or could be |
| * set from a real time clock, if such hardware is present. |
| */ |
| static struct timespec rt_clock_base; |
| static struct k_spinlock rt_clock_base_lock; |
| |
| /** |
| * @brief Get clock time specified by clock_id. |
| * |
| * See IEEE 1003.1 |
| */ |
| int z_impl_clock_gettime(clockid_t clock_id, struct timespec *ts) |
| { |
| struct timespec base; |
| k_spinlock_key_t key; |
| |
| switch (clock_id) { |
| case CLOCK_MONOTONIC: |
| base.tv_sec = 0; |
| base.tv_nsec = 0; |
| break; |
| |
| case CLOCK_REALTIME: |
| key = k_spin_lock(&rt_clock_base_lock); |
| base = rt_clock_base; |
| k_spin_unlock(&rt_clock_base_lock, key); |
| break; |
| |
| default: |
| errno = EINVAL; |
| return -1; |
| } |
| |
| uint64_t ticks = k_uptime_ticks(); |
| uint64_t elapsed_secs = ticks / CONFIG_SYS_CLOCK_TICKS_PER_SEC; |
| uint64_t nremainder = ticks - elapsed_secs * CONFIG_SYS_CLOCK_TICKS_PER_SEC; |
| |
| ts->tv_sec = (time_t) elapsed_secs; |
| /* For ns 32 bit conversion can be used since its smaller than 1sec. */ |
| ts->tv_nsec = (int32_t) k_ticks_to_ns_floor32(nremainder); |
| |
| ts->tv_sec += base.tv_sec; |
| ts->tv_nsec += base.tv_nsec; |
| if (ts->tv_nsec >= NSEC_PER_SEC) { |
| ts->tv_sec++; |
| ts->tv_nsec -= NSEC_PER_SEC; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| int z_vrfy_clock_gettime(clockid_t clock_id, struct timespec *ts) |
| { |
| Z_OOPS(Z_SYSCALL_MEMORY_WRITE(ts, sizeof(*ts))); |
| return z_impl_clock_gettime(clock_id, ts); |
| } |
| #include <syscalls/clock_gettime_mrsh.c> |
| #endif |
| |
| /** |
| * @brief Set the time of the specified clock. |
| * |
| * See IEEE 1003.1. |
| * |
| * Note that only the `CLOCK_REALTIME` clock can be set using this |
| * call. |
| */ |
| int clock_settime(clockid_t clock_id, const struct timespec *tp) |
| { |
| struct timespec base; |
| k_spinlock_key_t key; |
| |
| if (clock_id != CLOCK_REALTIME) { |
| errno = EINVAL; |
| return -1; |
| } |
| |
| uint64_t elapsed_nsecs = k_ticks_to_ns_floor64(k_uptime_ticks()); |
| int64_t delta = (int64_t)NSEC_PER_SEC * tp->tv_sec + tp->tv_nsec |
| - elapsed_nsecs; |
| |
| base.tv_sec = delta / NSEC_PER_SEC; |
| base.tv_nsec = delta % NSEC_PER_SEC; |
| |
| key = k_spin_lock(&rt_clock_base_lock); |
| rt_clock_base = base; |
| k_spin_unlock(&rt_clock_base_lock, key); |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Get current real time. |
| * |
| * See IEEE 1003.1 |
| */ |
| int gettimeofday(struct timeval *tv, const void *tz) |
| { |
| struct timespec ts; |
| int res; |
| |
| /* As per POSIX, "if tzp is not a null pointer, the behavior |
| * is unspecified." "tzp" is the "tz" parameter above. */ |
| ARG_UNUSED(tz); |
| |
| res = clock_gettime(CLOCK_REALTIME, &ts); |
| tv->tv_sec = ts.tv_sec; |
| tv->tv_usec = ts.tv_nsec / NSEC_PER_USEC; |
| |
| return res; |
| } |