| /* |
| * Copyright (c) 2018 Kokoon Technology Limited |
| * Copyright (c) 2019 Song Qiang <songqiang1304521@gmail.com> |
| * Copyright (c) 2019 Endre Karlson |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <errno.h> |
| |
| #include <drivers/adc.h> |
| #include <device.h> |
| #include <kernel.h> |
| #include <init.h> |
| #include <soc.h> |
| |
| #define ADC_CONTEXT_USES_KERNEL_TIMER |
| #include "adc_context.h" |
| |
| #define LOG_LEVEL CONFIG_ADC_LOG_LEVEL |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(adc_stm32); |
| |
| #include <clock_control/stm32_clock_control.h> |
| |
| #if !defined(CONFIG_SOC_SERIES_STM32F0X) && \ |
| !defined(CONFIG_SOC_SERIES_STM32L0X) |
| #define RANK(n) LL_ADC_REG_RANK_##n |
| static const u32_t table_rank[] = { |
| RANK(1), |
| RANK(2), |
| RANK(3), |
| RANK(4), |
| RANK(5), |
| RANK(6), |
| RANK(7), |
| RANK(8), |
| RANK(9), |
| RANK(10), |
| RANK(11), |
| RANK(12), |
| RANK(13), |
| RANK(14), |
| RANK(15), |
| RANK(16), |
| }; |
| |
| #define SEQ_LEN(n) LL_ADC_REG_SEQ_SCAN_ENABLE_##n##RANKS |
| static const u32_t table_seq_len[] = { |
| LL_ADC_REG_SEQ_SCAN_DISABLE, |
| SEQ_LEN(2), |
| SEQ_LEN(3), |
| SEQ_LEN(4), |
| SEQ_LEN(5), |
| SEQ_LEN(6), |
| SEQ_LEN(7), |
| SEQ_LEN(8), |
| SEQ_LEN(9), |
| SEQ_LEN(10), |
| SEQ_LEN(11), |
| SEQ_LEN(12), |
| SEQ_LEN(13), |
| SEQ_LEN(14), |
| SEQ_LEN(15), |
| SEQ_LEN(16), |
| }; |
| #endif |
| |
| #define RES(n) LL_ADC_RESOLUTION_##n##B |
| static const u32_t table_resolution[] = { |
| #if !defined(CONFIG_SOC_SERIES_STM32F1X) |
| RES(6), |
| RES(8), |
| RES(10), |
| #endif |
| RES(12), |
| }; |
| |
| #define SMP_TIME(x, y) LL_ADC_SAMPLINGTIME_##x##CYCLE##y |
| |
| /* |
| * Conversion time in ADC cycles. Many values should have been 0.5 less, |
| * but the adc api system currently does not support describing 'half cycles'. |
| * So all half cycles are counted as one. |
| */ |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || defined(CONFIG_SOC_SERIES_STM32F1X) |
| static const u16_t acq_time_tbl[8] = {2, 8, 14, 29, 42, 56, 72, 240}; |
| static const u32_t table_samp_time[] = { |
| SMP_TIME(1, _5), |
| SMP_TIME(7, S_5), |
| SMP_TIME(13, S_5), |
| SMP_TIME(28, S_5), |
| SMP_TIME(41, S_5), |
| SMP_TIME(55, S_5), |
| SMP_TIME(71, S_5), |
| SMP_TIME(239, S_5), |
| }; |
| #elif defined(CONFIG_SOC_SERIES_STM32F2X) || \ |
| defined(CONFIG_SOC_SERIES_STM32F4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32F7X) |
| static const u16_t acq_time_tbl[8] = {3, 15, 28, 56, 84, 112, 144, 480}; |
| static const u32_t table_samp_time[] = { |
| SMP_TIME(3, S), |
| SMP_TIME(15, S), |
| SMP_TIME(28, S), |
| SMP_TIME(56, S), |
| SMP_TIME(84, S), |
| SMP_TIME(112, S), |
| SMP_TIME(144, S), |
| SMP_TIME(480, S), |
| }; |
| #elif defined(CONFIG_SOC_SERIES_STM32F3X) |
| #ifdef ADC5_V1_1 |
| static const u16_t acq_time_tbl[8] = {2, 3, 5, 8, 20, 62, 182, 602}; |
| static const u32_t table_samp_time[] = { |
| SMP_TIME(1, _5), |
| SMP_TIME(2, S_5), |
| SMP_TIME(4, S_5), |
| SMP_TIME(7, S_5), |
| SMP_TIME(19, S_5), |
| SMP_TIME(61, S_5), |
| SMP_TIME(181, S_5), |
| SMP_TIME(601, S_5), |
| }; |
| #else |
| static const u16_t acq_time_tbl[8] = {2, 8, 14, 29, 42, 56, 72, 240}; |
| static const u32_t table_samp_time[] = { |
| SMP_TIME(1, _5), |
| SMP_TIME(7, S_5), |
| SMP_TIME(13, S_5), |
| SMP_TIME(28, S_5), |
| SMP_TIME(41, S_5), |
| SMP_TIME(55, S_5), |
| SMP_TIME(71, S_5), |
| SMP_TIME(239, S_5), |
| }; |
| #endif /* ADC5_V1_1 */ |
| #elif defined(CONFIG_SOC_SERIES_STM32L0X) |
| static const u16_t acq_time_tbl[8] = {2, 4, 8, 13, 20, 40, 80, 161}; |
| static const u32_t table_samp_time[] = { |
| SMP_TIME(1, _5), |
| SMP_TIME(3, S_5), |
| SMP_TIME(7, S_5), |
| SMP_TIME(12, S_5), |
| SMP_TIME(19, S_5), |
| SMP_TIME(39, S_5), |
| SMP_TIME(79, S_5), |
| SMP_TIME(160, S_5), |
| }; |
| #elif defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| static const u16_t acq_time_tbl[8] = {3, 7, 13, 25, 48, 93, 248, 641}; |
| static const u32_t table_samp_time[] = { |
| SMP_TIME(2, S_5), |
| SMP_TIME(6, S_5), |
| SMP_TIME(12, S_5), |
| SMP_TIME(24, S_5), |
| SMP_TIME(47, S_5), |
| SMP_TIME(92, S_5), |
| SMP_TIME(247, S_5), |
| SMP_TIME(640, S_5), |
| }; |
| #endif |
| |
| /* 16 external channels. */ |
| #define STM32_CHANNEL_COUNT 16 |
| |
| struct adc_stm32_data { |
| struct adc_context ctx; |
| struct device *dev; |
| u16_t *buffer; |
| u16_t *repeat_buffer; |
| |
| u8_t resolution; |
| u8_t channel_count; |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || defined(CONFIG_SOC_SERIES_STM32L0X) |
| s8_t acq_time_index; |
| #endif |
| }; |
| |
| struct adc_stm32_cfg { |
| ADC_TypeDef *base; |
| |
| void (*irq_cfg_func)(void); |
| |
| struct stm32_pclken pclken; |
| struct device *p_dev; |
| }; |
| |
| static int check_buffer_size(const struct adc_sequence *sequence, |
| u8_t active_channels) |
| { |
| size_t needed_buffer_size; |
| |
| needed_buffer_size = active_channels * sizeof(u16_t); |
| |
| if (sequence->options) { |
| needed_buffer_size *= (1 + sequence->options->extra_samplings); |
| } |
| |
| if (sequence->buffer_size < needed_buffer_size) { |
| LOG_ERR("Provided buffer is too small (%u/%u)", |
| sequence->buffer_size, needed_buffer_size); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static void adc_stm32_start_conversion(struct device *dev) |
| { |
| const struct adc_stm32_cfg *config = dev->config->config_info; |
| ADC_TypeDef *adc = (ADC_TypeDef *)config->base; |
| |
| LOG_DBG("Starting conversion"); |
| |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32F3X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| LL_ADC_REG_StartConversion(adc); |
| #else |
| LL_ADC_REG_StartConversionSWStart(adc); |
| #endif |
| } |
| |
| static int start_read(struct device *dev, const struct adc_sequence *sequence) |
| { |
| const struct adc_stm32_cfg *config = dev->config->config_info; |
| struct adc_stm32_data *data = dev->driver_data; |
| ADC_TypeDef *adc = (ADC_TypeDef *)config->base; |
| u8_t resolution; |
| int err; |
| |
| switch (sequence->resolution) { |
| #if !defined(CONFIG_SOC_SERIES_STM32F1X) |
| case 6: |
| resolution = table_resolution[0]; |
| break; |
| case 8: |
| resolution = table_resolution[1]; |
| break; |
| case 10: |
| resolution = table_resolution[2]; |
| break; |
| case 12: |
| resolution = table_resolution[3]; |
| break; |
| #else |
| case 12: |
| resolution = table_resolution[0]; |
| break; |
| #endif |
| default: |
| LOG_ERR("Invalid resolution"); |
| return -EINVAL; |
| } |
| |
| u32_t channels = sequence->channels; |
| |
| data->buffer = sequence->buffer; |
| u8_t index; |
| |
| index = find_lsb_set(channels) - 1; |
| u32_t channel = __LL_ADC_DECIMAL_NB_TO_CHANNEL(index); |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L0X) |
| LL_ADC_REG_SetSequencerChannels(adc, channel); |
| #else |
| LL_ADC_REG_SetSequencerRanks(adc, table_rank[0], channel); |
| LL_ADC_REG_SetSequencerLength(adc, table_seq_len[0]); |
| #endif |
| data->channel_count = 1; |
| |
| err = check_buffer_size(sequence, data->channel_count); |
| if (err) { |
| return err; |
| } |
| |
| #if !defined(CONFIG_SOC_SERIES_STM32F1X) |
| LL_ADC_SetResolution(adc, resolution); |
| #endif |
| |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32F3X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| LL_ADC_EnableIT_EOC(adc); |
| #elif defined(CONFIG_SOC_SERIES_STM32F1X) |
| LL_ADC_EnableIT_EOS(adc); |
| #else |
| LL_ADC_EnableIT_EOCS(adc); |
| #endif |
| |
| adc_context_start_read(&data->ctx, sequence); |
| |
| return adc_context_wait_for_completion(&data->ctx); |
| } |
| |
| static void adc_context_start_sampling(struct adc_context *ctx) |
| { |
| struct adc_stm32_data *data = |
| CONTAINER_OF(ctx, struct adc_stm32_data, ctx); |
| |
| data->repeat_buffer = data->buffer; |
| |
| adc_stm32_start_conversion(data->dev); |
| } |
| |
| static void adc_context_update_buffer_pointer(struct adc_context *ctx, |
| bool repeat_sampling) |
| { |
| struct adc_stm32_data *data = |
| CONTAINER_OF(ctx, struct adc_stm32_data, ctx); |
| |
| if (repeat_sampling) { |
| data->buffer = data->repeat_buffer; |
| } |
| } |
| |
| static void adc_stm32_isr(void *arg) |
| { |
| struct device *dev = (struct device *)arg; |
| struct adc_stm32_data *data = (struct adc_stm32_data *)dev->driver_data; |
| struct adc_stm32_cfg *config = |
| (struct adc_stm32_cfg *)dev->config->config_info; |
| ADC_TypeDef *adc = config->base; |
| |
| *data->buffer++ = LL_ADC_REG_ReadConversionData32(adc); |
| |
| adc_context_on_sampling_done(&data->ctx, dev); |
| |
| LOG_DBG("ISR triggered."); |
| } |
| |
| static int adc_stm32_read(struct device *dev, |
| const struct adc_sequence *sequence) |
| { |
| struct adc_stm32_data *data = dev->driver_data; |
| int error; |
| |
| adc_context_lock(&data->ctx, false, NULL); |
| error = start_read(dev, sequence); |
| adc_context_release(&data->ctx, error); |
| |
| return error; |
| } |
| |
| #ifdef CONFIG_ADC_ASYNC |
| static int adc_stm32_read_async(struct device *dev, |
| const struct adc_sequence *sequence, |
| struct k_poll_signal *async) |
| { |
| struct adc_stm32_data *data = dev->driver_data; |
| int error; |
| |
| adc_context_lock(&data->ctx, true, async); |
| error = start_read(dev, sequence); |
| adc_context_release(&data->ctx, error); |
| |
| return error; |
| } |
| #endif |
| |
| static int adc_stm32_check_acq_time(u16_t acq_time) |
| { |
| for (int i = 0; i < 8; i++) { |
| if (acq_time == ADC_ACQ_TIME(ADC_ACQ_TIME_TICKS, |
| acq_time_tbl[i])) { |
| return i; |
| } |
| } |
| |
| if (acq_time == ADC_ACQ_TIME_DEFAULT) { |
| return 0; |
| } |
| |
| LOG_ERR("Conversion time not supportted."); |
| return -EINVAL; |
| } |
| |
| static void adc_stm32_setup_speed(struct device *dev, u8_t id, |
| u8_t acq_time_index) |
| { |
| struct adc_stm32_cfg *config = |
| (struct adc_stm32_cfg *)dev->config->config_info; |
| ADC_TypeDef *adc = config->base; |
| |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || defined(CONFIG_SOC_SERIES_STM32L0X) |
| LL_ADC_SetSamplingTimeCommonChannels(adc, |
| table_samp_time[acq_time_index]); |
| #else |
| LL_ADC_SetChannelSamplingTime(adc, |
| __LL_ADC_DECIMAL_NB_TO_CHANNEL(id), |
| table_samp_time[acq_time_index]); |
| #endif |
| } |
| |
| static int adc_stm32_channel_setup(struct device *dev, |
| const struct adc_channel_cfg *channel_cfg) |
| { |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || defined(CONFIG_SOC_SERIES_STM32L0X) |
| struct adc_stm32_data *data = dev->driver_data; |
| #endif |
| int acq_time_index; |
| |
| if (channel_cfg->channel_id >= STM32_CHANNEL_COUNT) { |
| LOG_ERR("Channel %d is not valid", channel_cfg->channel_id); |
| return -EINVAL; |
| } |
| |
| acq_time_index = adc_stm32_check_acq_time( |
| channel_cfg->acquisition_time); |
| if (acq_time_index < 0) { |
| return acq_time_index; |
| } |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || defined(CONFIG_SOC_SERIES_STM32L0X) |
| if (data->acq_time_index == -1) { |
| data->acq_time_index = acq_time_index; |
| } else { |
| /* All channels of F0/L0 must have identical acquisition time.*/ |
| if (acq_time_index != data->acq_time_index) { |
| return -EINVAL; |
| } |
| } |
| #endif |
| |
| if (channel_cfg->differential) { |
| LOG_ERR("Differential channels are not supported"); |
| return -EINVAL; |
| } |
| |
| if (channel_cfg->gain != ADC_GAIN_1) { |
| LOG_ERR("Invalid channel gain"); |
| return -EINVAL; |
| } |
| |
| if (channel_cfg->reference != ADC_REF_INTERNAL) { |
| LOG_ERR("Invalid channel reference"); |
| return -EINVAL; |
| } |
| |
| adc_stm32_setup_speed(dev, channel_cfg->channel_id, |
| acq_time_index); |
| |
| LOG_DBG("Channel setup succeeded!"); |
| |
| return 0; |
| } |
| |
| #if !defined(CONFIG_SOC_SERIES_STM32F2X) && \ |
| !defined(CONFIG_SOC_SERIES_STM32F4X) && \ |
| !defined(CONFIG_SOC_SERIES_STM32F7X) && \ |
| !defined(CONFIG_SOC_SERIES_STM32F1X) |
| static void adc_stm32_calib(struct device *dev) |
| { |
| struct adc_stm32_cfg *config = |
| (struct adc_stm32_cfg *)dev->config->config_info; |
| ADC_TypeDef *adc = config->base; |
| |
| #if defined(CONFIG_SOC_SERIES_STM32F3X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| LL_ADC_StartCalibration(adc, LL_ADC_SINGLE_ENDED); |
| #elif defined(CONFIG_SOC_SERIES_STM32F0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L0X) |
| LL_ADC_StartCalibration(adc); |
| #endif |
| while (LL_ADC_IsCalibrationOnGoing(adc)) { |
| } |
| } |
| #endif |
| |
| static int adc_stm32_init(struct device *dev) |
| { |
| struct adc_stm32_data *data = dev->driver_data; |
| const struct adc_stm32_cfg *config = dev->config->config_info; |
| struct device *clk = |
| device_get_binding(STM32_CLOCK_CONTROL_NAME); |
| ADC_TypeDef *adc = (ADC_TypeDef *)config->base; |
| |
| LOG_DBG("Initializing...."); |
| |
| data->dev = dev; |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || defined(CONFIG_SOC_SERIES_STM32L0X) |
| /* |
| * All conversion time for all channels on one ADC instance for F0 and |
| * L0 series chips has to be the same. This additional variable is for |
| * checking if the conversion time selection of all channels on one ADC |
| * instance is the same. |
| */ |
| data->acq_time_index = -1; |
| #endif |
| |
| if (clock_control_on(clk, |
| (clock_control_subsys_t *) &config->pclken) != 0) { |
| return -EIO; |
| } |
| |
| #if defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| /* |
| * L4, WB and G4 series STM32 needs to be awaken from deep sleep mode, |
| * and restore its calibration parameters if there are some previously |
| * stored calibration parameters. |
| */ |
| LL_ADC_DisableDeepPowerDown(adc); |
| #endif |
| /* |
| * F3, L4, WB and G4 ADC modules need some time to be stabilized before |
| * performing any enable or calibration actions. |
| */ |
| #if defined(CONFIG_SOC_SERIES_STM32F3X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| LL_ADC_EnableInternalRegulator(adc); |
| k_busy_wait(LL_ADC_DELAY_INTERNAL_REGUL_STAB_US); |
| #endif |
| |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L0X) |
| LL_ADC_SetClock(adc, LL_ADC_CLOCK_SYNC_PCLK_DIV4); |
| #elif defined(CONFIG_SOC_SERIES_STM32F3X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| LL_ADC_SetCommonClock(__LL_ADC_COMMON_INSTANCE(), |
| LL_ADC_CLOCK_SYNC_PCLK_DIV4); |
| #endif |
| |
| #if !defined(CONFIG_SOC_SERIES_STM32F2X) && \ |
| !defined(CONFIG_SOC_SERIES_STM32F4X) && \ |
| !defined(CONFIG_SOC_SERIES_STM32F7X) && \ |
| !defined(CONFIG_SOC_SERIES_STM32F1X) |
| /* |
| * Calibration of F1 series has to be started after ADC Module is |
| * enabled. |
| */ |
| adc_stm32_calib(dev); |
| #endif |
| |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| if (LL_ADC_IsActiveFlag_ADRDY(adc)) { |
| LL_ADC_ClearFlag_ADRDY(adc); |
| } |
| |
| /* |
| * These two series STM32 has one internal voltage reference source |
| * to be enabled. |
| */ |
| LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(adc), |
| LL_ADC_PATH_INTERNAL_VREFINT); |
| #endif |
| |
| #if defined(CONFIG_SOC_SERIES_STM32F0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32F3X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L0X) || \ |
| defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| /* |
| * ADC modules on these series have to wait for some cycles to be |
| * enabled. |
| */ |
| u32_t adc_rate, wait_cycles; |
| |
| if (clock_control_get_rate(clk, |
| (clock_control_subsys_t *) &config->pclken, &adc_rate) < 0) { |
| LOG_ERR("ADC clock rate get error."); |
| } |
| |
| wait_cycles = SystemCoreClock / adc_rate * |
| LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES; |
| |
| for (int i = wait_cycles; i >= 0; i--) { |
| } |
| #endif |
| |
| LL_ADC_Enable(adc); |
| |
| #if defined(CONFIG_SOC_SERIES_STM32L4X) || \ |
| defined(CONFIG_SOC_SERIES_STM32WBX) || \ |
| defined(CONFIG_SOC_SERIES_STM32G4X) |
| /* |
| * Enabling ADC modules in L4, WB and G4 series may fail if they are |
| * still not stabilized, this will wait for a short time to ensure ADC |
| * modules are properly enabled. |
| */ |
| u32_t countTimeout = 0; |
| |
| while (LL_ADC_IsActiveFlag_ADRDY(adc) == 0) { |
| if (LL_ADC_IsEnabled(adc) == 0UL) { |
| LL_ADC_Enable(adc); |
| countTimeout++; |
| if (countTimeout == 10) { |
| return -ETIMEDOUT; |
| } |
| } |
| } |
| #endif |
| |
| config->irq_cfg_func(); |
| |
| #ifdef CONFIG_SOC_SERIES_STM32F1X |
| /* Calibration of F1 must starts after two cycles after ADON is set. */ |
| LL_ADC_StartCalibration(adc); |
| LL_ADC_REG_SetTriggerSource(adc, LL_ADC_REG_TRIG_SOFTWARE); |
| #endif |
| adc_context_unlock_unconditionally(&data->ctx); |
| |
| return 0; |
| } |
| |
| static const struct adc_driver_api api_stm32_driver_api = { |
| .channel_setup = adc_stm32_channel_setup, |
| .read = adc_stm32_read, |
| #ifdef CONFIG_ADC_ASYNC |
| .read_async = adc_stm32_read_async, |
| #endif |
| }; |
| |
| #define STM32_ADC_INIT(index) \ |
| \ |
| static void adc_stm32_cfg_func_##index(void); \ |
| \ |
| static const struct adc_stm32_cfg adc_stm32_cfg_##index = { \ |
| .base = (ADC_TypeDef *)DT_ADC_##index##_BASE_ADDRESS, \ |
| .irq_cfg_func = adc_stm32_cfg_func_##index, \ |
| .pclken = { \ |
| .enr = DT_ADC_##index##_CLOCK_BITS, \ |
| .bus = DT_ADC_##index##_CLOCK_BUS, \ |
| }, \ |
| }; \ |
| static struct adc_stm32_data adc_stm32_data_##index = { \ |
| ADC_CONTEXT_INIT_TIMER(adc_stm32_data_##index, ctx), \ |
| ADC_CONTEXT_INIT_LOCK(adc_stm32_data_##index, ctx), \ |
| ADC_CONTEXT_INIT_SYNC(adc_stm32_data_##index, ctx), \ |
| }; \ |
| \ |
| DEVICE_AND_API_INIT(adc_##index, DT_ADC_##index##_NAME, &adc_stm32_init,\ |
| &adc_stm32_data_##index, &adc_stm32_cfg_##index, \ |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, \ |
| &api_stm32_driver_api); \ |
| \ |
| static void adc_stm32_cfg_func_##index(void) \ |
| { \ |
| IRQ_CONNECT(DT_ADC_##index##_IRQ, DT_ADC_##index##_IRQ_PRI, \ |
| adc_stm32_isr, DEVICE_GET(adc_##index), 0); \ |
| irq_enable(DT_ADC_##index##_IRQ); \ |
| } |
| |
| #ifdef CONFIG_ADC_1 |
| STM32_ADC_INIT(1) |
| #endif /* CONFIG_ADC_1 */ |