blob: c3df2d3a4368712adf689e73a02e04579bfb2f8d [file] [log] [blame]
/*
* Copyright (c) 2020 Thomas Stranger
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <st/g0/stm32g070.dtsi>
/ {
soc {
pinctrl: pin-controller@50000000 {
gpioe: gpio@50001000 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x50001000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_IOP 0x00000010>;
};
};
usart5: serial@40005000 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40005000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000100>;
interrupts = <29 0>;
status = "disabled";
};
usart6: serial@40013c00 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40013c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000200>;
interrupts = <29 0>;
status = "disabled";
};
timers4: timers@40000800 {
compatible = "st,stm32-timers";
reg = <0x40000800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000004>;
interrupts = <16 0>;
interrupt-names = "global";
st,prescaler = <0>;
status = "disabled";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
#pwm-cells = <3>;
};
};
i2c3: i2c@40008800 {
compatible = "st,stm32-i2c-v2";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40008800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00800000>;
interrupts = <24 0>;
interrupt-names = "combined";
status = "disabled";
};
spi3: spi@40003c00 {
compatible = "st,stm32-spi-fifo", "st,stm32-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40003c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00008000>;
interrupts = <26 3>;
status = "disabled";
};
dma2: dma@40020400 {
compatible = "st,stm32-dma-v2";
#dma-cells = <3>;
reg = <0x40020400 0x400>;
interrupts = <11 0 11 0 11 0 11 0 11 0>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x2>;
dma-requests = <5>;
dma-offset = <7>;
status = "disabled";
};
dmamux1: dmamux@40020800 {
dma-channels = <12>;
};
usb: usb@40005c00 {
compatible = "st,stm32-usb";
reg = <0x40005c00 0x400>;
interrupts = <8 0>;
interrupt-names = "usb";
num-bidir-endpoints = <8>;
ram-size = <2048>;
phys = <&usb_fs_phy>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00002000>;
status = "disabled";
};
};
usb_fs_phy: usbphy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
};