dts/bindings/clock/st,stm32f100-pll-clock.yaml

# Copyright (c) 2021, Linaro ltd
# SPDX-License-Identifier: Apache-2.0

description: |
  Main PLL node binding for STM32F100 devices

  Takes one of clk_hse or clk_hsi as input clock.
  When clk_hsi is used a fixed prescaler is applied. When input clock is hse or
  pll2, configurable prescaler is used.

  Up to 2 output clocks could be supported and for each output clock, the
  frequency can be computed with the following formula:

    f(PLLCLK) = f(PLLIN) x PLLMUL       --> SYSCLK (System Clock)

    with, depending on the case:
            f(PLLIN) = f(input_clk) / 2       if input_clk = clk_hsi
            f(PLLIN) = f(input_clk) / PREDIV  if input_clk = clk_hse

  The PLL output frequency must not exceed 24 MHz.


compatible: "st,stm32f100-pll-clock"

include:
  - name: st,stm32f105-pll-clock.yaml
    property-blocklist:
      - mul

properties:
  mul:
    type: int
    required: true
    description: |
        PLL multiplication factor for output clock
        Valid range: 2 - 16