| /* SPDX-License-Identifier: Apache-2.0 */ |
| |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| #include <zephyr/dt-bindings/pwm/pwm.h> |
| #include <freq.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "sifive,FE310G-0002-Z0-dev", "fe310-dev", "sifive-dev"; |
| model = "SiFive,FE310G-0002-Z0"; |
| clocks { |
| coreclk: core-clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <DT_FREQ_M(16)>; |
| }; |
| |
| tlclk: tl-clk { |
| #clock-cells = <0>; |
| compatible = "fixed-factor-clock"; |
| clocks = <&coreclk>; |
| clock-div = <1>; |
| }; |
| }; |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu: cpu@0 { |
| compatible = "sifive,e31"; |
| device_type = "cpu"; |
| reg = <0>; |
| riscv,isa = "rv32imac"; |
| status = "okay"; |
| hlic: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| }; |
| }; |
| }; |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "sifive,FE310G-0002-Z0-soc", "fe310-soc", |
| "sifive-soc", "simple-bus"; |
| ranges; |
| wdog0: wdog@10000000 { |
| compatible = "sifive,wdt"; |
| interrupt-parent = <&plic>; |
| interrupts = <1 1>; |
| reg = <0x10000000 0x40>; |
| reg-names = "control"; |
| }; |
| aon: aon@10000040 { |
| compatible = "sifive,aon0"; |
| interrupt-parent = <&plic>; |
| interrupts = <2 1>; |
| reg = <0x10000040 0x9c0>; |
| reg-names = "control"; |
| }; |
| clint: clint@2000000 { |
| compatible = "sifive,clint0"; |
| interrupts-extended = <&hlic 3 &hlic 7>; |
| reg = <0x2000000 0x10000>; |
| }; |
| debug: debug-controller@0 { |
| compatible = "sifive,debug-013", "riscv,debug-013"; |
| interrupts-extended = <&hlic 65535>; |
| reg = <0x0 0x1000>; |
| reg-names = "control"; |
| }; |
| dtim: dtim@80000000 { |
| compatible = "sifive,dtim0"; |
| reg = <0x80000000 0x4000>; |
| reg-names = "mem"; |
| }; |
| error-device@3000 { |
| compatible = "sifive,error0"; |
| reg = <0x3000 0x1000>; |
| reg-names = "mem"; |
| }; |
| gpio0: gpio@10012000 { |
| compatible = "sifive,gpio0"; |
| gpio-controller; |
| interrupt-parent = <&plic>; |
| interrupts = <8 1>, <9 1>, <10 1>, <11 1>, |
| <12 1>, <13 1>, <14 1>, <15 1>, |
| <16 1>, <17 1>, <18 1>, <19 1>, |
| <20 1>, <21 1>, <22 1>, <23 1>, |
| <24 1>, <25 1>, <26 1>, <27 1>, |
| <28 1>, <29 1>, <30 1>, <31 1>, |
| <32 1>, <33 1>, <34 1>, <35 1>, |
| <36 1>, <37 1>, <38 1>, <39 1>; |
| reg = <0x10012000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| #gpio-cells = <2>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pinctrl: pinctrl@10012038 { |
| compatible = "sifive,pinctrl"; |
| reg = <0x10012038 0x8>; |
| }; |
| }; |
| i2c0: i2c@10016000 { |
| compatible = "sifive,i2c0"; |
| interrupt-parent = <&plic>; |
| interrupts = <52 1>; |
| reg = <0x10016000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| plic: interrupt-controller@c000000 { |
| compatible = "sifive,plic-1.0.0"; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| interrupts-extended = <&hlic 11>; |
| reg = <0x0c000000 0x00002000 |
| 0x0c002000 0x001fe000 |
| 0x0c200000 0x03e00000>; |
| reg-names = "prio", "irq_en", "reg"; |
| riscv,max-priority = <7>; |
| riscv,ndev = <52>; |
| }; |
| itim: itim@8000000 { |
| compatible = "sifive,itim0"; |
| reg = <0x8000000 0x2000>; |
| reg-names = "mem"; |
| }; |
| otp: otp@10010000 { |
| compatible = "sifive,otp0"; |
| reg = <0x10010000 0x1000 0x20000 0x2000>; |
| reg-names = "control", "mem"; |
| }; |
| prci: prci@10008000 { |
| compatible = "sifive,freedome300prci0"; |
| reg = <0x10008000 0x1000>; |
| reg-names = "control"; |
| }; |
| pwm0: pwm@10015000 { |
| compatible = "sifive,pwm0"; |
| interrupt-parent = <&plic>; |
| interrupts = <40 1>, <41 1>, <42 1>, <43 1>; |
| reg = <0x10015000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| sifive,compare-width = <8>; |
| #pwm-cells = <2>; |
| }; |
| pwm1: pwm@10025000 { |
| compatible = "sifive,pwm0"; |
| interrupt-parent = <&plic>; |
| interrupts = <44 1>, <45 1>, <46 1>, <47 1>; |
| reg = <0x10025000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| sifive,compare-width = <16>; |
| #pwm-cells = <2>; |
| }; |
| pwm2: pwm@10035000 { |
| compatible = "sifive,pwm0"; |
| interrupt-parent = <&plic>; |
| interrupts = <48 1>, <49 1>, <50 1>, <51 1>; |
| reg = <0x10035000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| sifive,compare-width = <16>; |
| #pwm-cells = <2>; |
| }; |
| modeselect: rom@1000 { |
| compatible = "sifive,modeselect0"; |
| reg = <0x1000 0x1000>; |
| reg-names = "mem"; |
| }; |
| maskrom: rom@10000 { |
| compatible = "sifive,maskrom0"; |
| reg = <0x10000 0x2000>; |
| reg-names = "mem"; |
| }; |
| uart0: serial@10013000 { |
| compatible = "sifive,uart0"; |
| interrupt-parent = <&plic>; |
| interrupts = <3 1>; |
| reg = <0x10013000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| }; |
| uart1: serial@10023000 { |
| compatible = "sifive,uart0"; |
| interrupt-parent = <&plic>; |
| interrupts = <4 1>; |
| reg = <0x10023000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| }; |
| spi0: spi@10014000 { |
| compatible = "sifive,spi0"; |
| interrupt-parent = <&plic>; |
| interrupts = <5 1>; |
| reg = <0x10014000 0x1000 0x20000000 0x20000000>; |
| reg-names = "control", "mem"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi1: spi@10024000 { |
| compatible = "sifive,spi0"; |
| interrupt-parent = <&plic>; |
| interrupts = <6 1>; |
| reg = <0x10024000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| spi2: spi@10034000 { |
| compatible = "sifive,spi0"; |
| interrupt-parent = <&plic>; |
| interrupts = <7 1>; |
| reg = <0x10034000 0x1000>; |
| reg-names = "control"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| teststatus: teststatus@4000 { |
| compatible = "sifive,test0"; |
| reg = <0x4000 0x1000>; |
| reg-names = "control"; |
| }; |
| }; |
| }; |