| /* |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Copyright (c) 2023 Arunmani Alagarsamy |
| * Author: Arunmani Alagarsamy <arunmani27100@gmail.com> |
| */ |
| |
| #include <zephyr/drivers/i2c.h> |
| #include <zephyr/drivers/rtc.h> |
| #include <zephyr/logging/log.h> |
| #include <zephyr/pm/device.h> |
| #include <zephyr/sys/util.h> |
| |
| #define DT_DRV_COMPAT maxim_ds1307 |
| |
| LOG_MODULE_REGISTER(ds1307, CONFIG_RTC_LOG_LEVEL); |
| |
| /* DS1307 registers */ |
| #define DS1307_REG_SECONDS 0x00 |
| #define DS1307_REG_MINUTES 0x01 |
| #define DS1307_REG_HOURS 0x02 |
| #define DS1307_REG_DAY 0x03 |
| #define DS1307_REG_DATE 0x04 |
| #define DS1307_REG_MONTH 0x05 |
| #define DS1307_REG_YEAR 0x06 |
| #define DS1307_REG_CTRL 0x07 |
| |
| #define SECONDS_BITS GENMASK(6, 0) |
| #define MINUTES_BITS GENMASK(7, 0) |
| #define HOURS_BITS GENMASK(5, 0) |
| #define DATE_BITS GENMASK(5, 0) |
| #define MONTHS_BITS GENMASK(4, 0) |
| #define WEEKDAY_BITS GENMASK(2, 0) |
| #define YEAR_BITS GENMASK(7, 0) |
| #define VALIDATE_24HR BIT(6) |
| |
| struct ds1307_config { |
| struct i2c_dt_spec i2c_bus; |
| }; |
| |
| struct ds1307_data { |
| struct k_spinlock lock; |
| }; |
| |
| static int ds1307_set_time(const struct device *dev, const struct rtc_time *tm) |
| { |
| int err; |
| uint8_t regs[7]; |
| |
| struct ds1307_data *data = dev->data; |
| const struct ds1307_config *config = dev->config; |
| |
| k_spinlock_key_t key = k_spin_lock(&data->lock); |
| |
| LOG_DBG("set time: year = %d, mon = %d, mday = %d, wday = %d, hour = %d, " |
| "min = %d, sec = %d", |
| tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, tm->tm_hour, tm->tm_min, |
| tm->tm_sec); |
| |
| regs[0] = bin2bcd(tm->tm_sec) & SECONDS_BITS; |
| regs[1] = bin2bcd(tm->tm_min); |
| regs[2] = bin2bcd(tm->tm_hour); |
| regs[3] = bin2bcd(tm->tm_wday); |
| regs[4] = bin2bcd(tm->tm_mday); |
| regs[5] = bin2bcd(tm->tm_mon); |
| regs[6] = bin2bcd((tm->tm_year % 100)); |
| |
| err = i2c_burst_write_dt(&config->i2c_bus, DS1307_REG_SECONDS, regs, sizeof(regs)); |
| |
| k_spin_unlock(&data->lock, key); |
| |
| return err; |
| } |
| |
| static int ds1307_get_time(const struct device *dev, struct rtc_time *timeptr) |
| { |
| int err; |
| uint8_t regs[7]; |
| |
| struct ds1307_data *data = dev->data; |
| const struct ds1307_config *config = dev->config; |
| |
| k_spinlock_key_t key = k_spin_lock(&data->lock); |
| |
| err = i2c_burst_read_dt(&config->i2c_bus, DS1307_REG_SECONDS, regs, sizeof(regs)); |
| if (err != 0) { |
| goto unlock; |
| } |
| |
| timeptr->tm_sec = bcd2bin(regs[0] & SECONDS_BITS); |
| timeptr->tm_min = bcd2bin(regs[1] & MINUTES_BITS); |
| timeptr->tm_hour = bcd2bin(regs[2] & HOURS_BITS); /* 24hr mode */ |
| timeptr->tm_wday = bcd2bin(regs[3] & WEEKDAY_BITS); |
| timeptr->tm_mday = bcd2bin(regs[4] & DATE_BITS); |
| timeptr->tm_mon = bcd2bin(regs[5] & MONTHS_BITS); |
| timeptr->tm_year = bcd2bin(regs[6] & YEAR_BITS); |
| timeptr->tm_year = timeptr->tm_year + 100; |
| |
| /* Not used */ |
| timeptr->tm_nsec = 0; |
| timeptr->tm_isdst = -1; |
| timeptr->tm_yday = -1; |
| |
| /* Validate the chip in 24hr mode */ |
| if (regs[2] & VALIDATE_24HR) { |
| err = -ENODATA; |
| goto unlock; |
| } |
| |
| LOG_DBG("get time: year = %d, mon = %d, mday = %d, wday = %d, hour = %d, " |
| "min = %d, sec = %d", |
| timeptr->tm_year, timeptr->tm_mon, timeptr->tm_mday, timeptr->tm_wday, |
| timeptr->tm_hour, timeptr->tm_min, timeptr->tm_sec); |
| |
| unlock: |
| k_spin_unlock(&data->lock, key); |
| |
| return err; |
| } |
| |
| static const struct rtc_driver_api ds1307_driver_api = { |
| .set_time = ds1307_set_time, |
| .get_time = ds1307_get_time, |
| }; |
| |
| static int ds1307_init(const struct device *dev) |
| { |
| int err; |
| const struct ds1307_config *config = dev->config; |
| |
| if (!i2c_is_ready_dt(&config->i2c_bus)) { |
| LOG_ERR("I2C bus not ready"); |
| return -ENODEV; |
| } |
| |
| /* Disable squarewave output */ |
| err = i2c_reg_write_byte_dt(&config->i2c_bus, DS1307_REG_CTRL, 0x00); |
| if (err < 0) { |
| LOG_ERR("Error: SQW: %d\n", err); |
| } |
| |
| /* Ensure Clock Halt = 0 */ |
| uint8_t reg = 0; |
| |
| err = i2c_reg_read_byte_dt(&config->i2c_bus, DS1307_REG_SECONDS, ®); |
| if (err < 0) { |
| LOG_ERR("Error: Read SECONDS/Clock Halt register: %d\n", err); |
| } |
| if (reg & ~SECONDS_BITS) { |
| /* Clock Halt bit is set */ |
| err = i2c_reg_write_byte_dt(&config->i2c_bus, DS1307_REG_SECONDS, |
| reg & SECONDS_BITS); |
| if (err < 0) { |
| LOG_ERR("Error: Clear Clock Halt bit: %d\n", err); |
| } |
| } |
| |
| return 0; |
| } |
| |
| #define DS1307_DEFINE(inst) \ |
| static struct ds1307_data ds1307_data_##inst; \ |
| static const struct ds1307_config ds1307_config_##inst = { \ |
| .i2c_bus = I2C_DT_SPEC_INST_GET(inst), \ |
| }; \ |
| DEVICE_DT_INST_DEFINE(inst, &ds1307_init, NULL, &ds1307_data_##inst, \ |
| &ds1307_config_##inst, POST_KERNEL, CONFIG_RTC_INIT_PRIORITY, \ |
| &ds1307_driver_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(DS1307_DEFINE) |