| # Bluetooth Audio - Call control configuration options |
| # |
| # Copyright (c) 2020 Bose Corporation |
| # Copyright (c) 2024 Nordic Semiconductor ASA |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| if BT_AUDIO |
| |
| ##################### Telephone Bearer Service ##################### |
| |
| config BT_TBS |
| bool "Telephone Bearer Service Support" |
| depends on BT_GATT_DYNAMIC_DB |
| depends on UTF8 |
| help |
| This option enables support for Telephone Bearer Service. By default this only |
| initializes the GTBS service. If specific TBS services are wanted, they need to be |
| enabled by setting BT_TBS_BEARER_COUNT to a non-zero value. |
| |
| if BT_TBS |
| |
| config BT_TBS_SUPPORTED_FEATURES |
| int "Telephone Bearer Service Supported Features" |
| default 1 |
| range 0 3 |
| help |
| Bitfield to set supported features of the bearer. |
| Bit 0: Local Hold and Retrieve |
| Bit 1: Join calls within Telephone Bearer Service |
| |
| config BT_TBS_MAX_CALLS |
| int "Telephone Bearer Service Maximum Number Of Calls Supported" |
| default 3 |
| range 1 16 |
| help |
| Sets the maximum number of calls the service supports per bearer. |
| |
| config BT_TBS_BEARER_COUNT |
| int "How many bearer instances the device instantiates" |
| default 0 |
| range 0 $(UINT8_MAX) |
| help |
| Sets the number of TBS instances that are instantiated |
| |
| config BT_TBS_MAX_SCHEME_LIST_LENGTH |
| int "The maximum length of the URI scheme list" |
| default 30 |
| range 0 512 |
| help |
| Sets the maximum length of the URI scheme list. |
| |
| endif # BT_TBS |
| |
| |
| ##################### Call Control Client ##################### |
| |
| config BT_TBS_CLIENT_GTBS |
| bool "Generic Telephone Bearer Service client support" |
| depends on UTF8 |
| help |
| This option enables support for the GTBS-oriented Call Control client. |
| |
| config BT_TBS_CLIENT_TBS |
| bool "Telephone Bearer Service client support" |
| depends on UTF8 |
| help |
| This option enables support for the TBS-oriented Call Control client. |
| |
| config BT_TBS_CLIENT |
| def_bool BT_TBS_CLIENT_GTBS || BT_TBS_CLIENT_TBS |
| select BT_GATT_CLIENT |
| select BT_GATT_AUTO_DISCOVER_CCC |
| |
| if BT_TBS_CLIENT |
| |
| config BT_TBS_CLIENT_MAX_CALLS |
| int "Maximum Number Of Calls Supported" |
| default 1 |
| help |
| Sets the maximum number of calls the client supports per TBS instance. |
| |
| config BT_TBS_CLIENT_MAX_TBS_INSTANCES |
| int "Maximum number of TBS instances to setup" |
| depends on BT_TBS_CLIENT_TBS |
| default 1 |
| range 1 3 |
| help |
| Sets the maximum number of Telephone Bearer Service (TBS) |
| instances to setup and use. |
| |
| config BT_TBS_CLIENT_MINIMAL |
| bool "Minimal TBS Client without optional procedures" |
| default n |
| help |
| This option disables all optional procedures in the TBS Client. |
| |
| config BT_TBS_CLIENT_BEARER_PROVIDER_NAME |
| bool "Support reading Bearer Provider Name" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Bearer Provider Name. |
| |
| config BT_TBS_CLIENT_BEARER_UCI |
| bool "Support reading Bearer UCI" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Bearer UCI. |
| |
| config BT_TBS_CLIENT_BEARER_TECHNOLOGY |
| bool "Support reading Bearer Technology" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Bearer Technology. |
| |
| config BT_TBS_CLIENT_BEARER_URI_SCHEMES_SUPPORTED_LIST |
| bool "Support reading Bearer URI Schemes Supported List" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Bearer URI Schemes Supported |
| List. |
| |
| config BT_TBS_CLIENT_BEARER_SIGNAL_STRENGTH |
| bool "Support reading Bearer Signal Strength" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Bearer Signal Strength. |
| |
| config BT_TBS_CLIENT_READ_BEARER_SIGNAL_INTERVAL |
| bool "Support reading Bearer Signal Strength Reporting Interval" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Bearer Signal Strength |
| Reporting Interval. |
| |
| config BT_TBS_CLIENT_SET_BEARER_SIGNAL_INTERVAL |
| bool "Support setting Bearer Signal Strength Reporting Interval" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for setting Bearer Signal Strength |
| Reporting Interval. |
| |
| config BT_TBS_CLIENT_BEARER_LIST_CURRENT_CALLS |
| bool "Support reading Bearer List Current Calls" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Bearer List Current Calls. |
| |
| config BT_TBS_CLIENT_CCID |
| bool "Support reading Content Control ID" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Content Control ID. |
| |
| config BT_TBS_CLIENT_INCOMING_URI |
| bool "Support reading Incoming Call Target Bearer URI" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Incoming Call Target Bearer |
| URI. |
| |
| config BT_TBS_CLIENT_STATUS_FLAGS |
| bool "Support reading Status Flags" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Status Flags. |
| |
| config BT_TBS_CLIENT_CP_PROCEDURES |
| def_bool y |
| depends on (BT_TBS_CLIENT_ACCEPT_CALL || \ |
| BT_TBS_CLIENT_TERMINATE_CALL || \ |
| BT_TBS_CLIENT_HOLD_CALL || \ |
| BT_TBS_CLIENT_RETRIEVE_CALL || \ |
| BT_TBS_CLIENT_ORIGINATE_CALL || \ |
| BT_TBS_CLIENT_JOIN_CALLS) |
| help |
| This hidden option indicates that there are at least one control |
| point procedure available. |
| When this option is disabled it indicates that the control point can |
| be optimized away. |
| |
| config BT_TBS_CLIENT_ACCEPT_CALL |
| bool "Support Accept Call" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for answering an incoming call. |
| |
| config BT_TBS_CLIENT_TERMINATE_CALL |
| bool "Support Terminate Call" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for terminating a call. |
| |
| config BT_TBS_CLIENT_HOLD_CALL |
| bool "Support Hold Call" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for putting a call on hold. |
| |
| config BT_TBS_CLIENT_RETRIEVE_CALL |
| bool "Support Retrieve Call" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for retrieving a call on hold. |
| |
| config BT_TBS_CLIENT_ORIGINATE_CALL |
| bool "Support Originate Call" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for originating a call. |
| |
| config BT_TBS_CLIENT_JOIN_CALLS |
| bool "Support Join Calls" |
| depends on BT_TBS_CLIENT_MAX_CALLS > 1 |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for joining calls. |
| |
| config BT_TBS_CLIENT_OPTIONAL_OPCODES |
| bool "Support reading Optional Opcodes" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Optional Opcodes. |
| |
| config BT_TBS_CLIENT_INCOMING_CALL |
| bool "Support reading Incoming Call" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Incoming Call. |
| |
| config BT_TBS_CLIENT_CALL_FRIENDLY_NAME |
| bool "Support reading Call Friendly Name" |
| default !BT_TBS_CLIENT_MINIMAL |
| help |
| This option enables support for reading Call Friendly Name. |
| |
| endif # BT_TBS_CLIENT |
| |
| if BT_TBS || BT_TBS_CLIENT |
| |
| config BT_TBS_MAX_URI_LENGTH |
| int "The maximum length of the call URI supported" |
| default 30 |
| range 4 253 |
| help |
| Sets the maximum length of the call URI supported. Note that if this |
| value is lower than a call URI, the call request will be rejected. |
| |
| config BT_TBS_MAX_PROVIDER_NAME_LENGTH |
| int "The maximum length of the bearer provider name" |
| default 30 |
| range 0 512 |
| help |
| Sets the maximum length of the bearer provider name. |
| |
| endif # BT_TBS || BT_TBS_CLIENT |
| |
| endif # BT_AUDIO |
