| /* |
| * Copyright (c) 2017-2021 Nordic Semiconductor ASA |
| * Copyright (c) 2015-2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #include <sys/types.h> |
| #include <stdbool.h> |
| #include <stdint.h> |
| #include <string.h> |
| |
| #include <zephyr/sys/atomic.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <zephyr/sys/check.h> |
| |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/iso.h> |
| #include <zephyr/bluetooth/buf.h> |
| #include <zephyr/bluetooth/direction.h> |
| #include <zephyr/bluetooth/addr.h> |
| #include <zephyr/bluetooth/hci.h> |
| #include <zephyr/bluetooth/hci_vs.h> |
| |
| #include "addr_internal.h" |
| #include "hci_core.h" |
| #include "conn_internal.h" |
| #include "direction_internal.h" |
| #include "id.h" |
| |
| #include "common/bt_str.h" |
| #include "scan.h" |
| |
| #define LOG_LEVEL CONFIG_BT_HCI_CORE_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(bt_scan); |
| |
| struct scanner_state { |
| ATOMIC_DEFINE(scan_flags, BT_LE_SCAN_USER_NUM_FLAGS); |
| struct bt_le_scan_param explicit_scan_param; |
| struct bt_le_scan_param used_scan_param; |
| struct k_mutex scan_update_mutex; |
| struct k_mutex scan_explicit_params_mutex; |
| }; |
| |
| enum scan_action { |
| SCAN_ACTION_NONE, |
| SCAN_ACTION_START, |
| SCAN_ACTION_STOP, |
| SCAN_ACTION_UPDATE, |
| }; |
| |
| static bt_le_scan_cb_t *scan_dev_found_cb; |
| static sys_slist_t scan_cbs = SYS_SLIST_STATIC_INIT(&scan_cbs); |
| |
| static struct scanner_state scan_state; |
| |
| #if defined(CONFIG_BT_EXT_ADV) |
| /* A buffer used to reassemble advertisement data from the controller. */ |
| NET_BUF_SIMPLE_DEFINE(ext_scan_buf, CONFIG_BT_EXT_SCAN_BUF_SIZE); |
| |
| struct fragmented_advertiser { |
| bt_addr_le_t addr; |
| uint8_t sid; |
| enum { |
| FRAG_ADV_INACTIVE, |
| FRAG_ADV_REASSEMBLING, |
| FRAG_ADV_DISCARDING, |
| } state; |
| }; |
| |
| static struct fragmented_advertiser reassembling_advertiser; |
| |
| static bool fragmented_advertisers_equal(const struct fragmented_advertiser *a, |
| const bt_addr_le_t *addr, uint8_t sid) |
| { |
| /* Two advertisers are equal if they are the same adv set from the same device */ |
| return a->sid == sid && bt_addr_le_eq(&a->addr, addr); |
| } |
| |
| /* Sets the address and sid of the advertiser to be reassembled. */ |
| static void init_reassembling_advertiser(const bt_addr_le_t *addr, uint8_t sid) |
| { |
| bt_addr_le_copy(&reassembling_advertiser.addr, addr); |
| reassembling_advertiser.sid = sid; |
| reassembling_advertiser.state = FRAG_ADV_REASSEMBLING; |
| } |
| |
| static void reset_reassembling_advertiser(void) |
| { |
| net_buf_simple_reset(&ext_scan_buf); |
| reassembling_advertiser.state = FRAG_ADV_INACTIVE; |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC) |
| static struct bt_le_per_adv_sync *get_pending_per_adv_sync(void); |
| static struct bt_le_per_adv_sync per_adv_sync_pool[CONFIG_BT_PER_ADV_SYNC_MAX]; |
| static sys_slist_t pa_sync_cbs = SYS_SLIST_STATIC_INIT(&pa_sync_cbs); |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC) */ |
| #endif /* defined(CONFIG_BT_EXT_ADV) */ |
| |
| void bt_scan_softreset(void) |
| { |
| scan_dev_found_cb = NULL; |
| #if defined(CONFIG_BT_EXT_ADV) |
| reset_reassembling_advertiser(); |
| #endif |
| } |
| |
| void bt_scan_reset(void) |
| { |
| memset(&scan_state, 0x0, sizeof(scan_state)); |
| k_mutex_init(&scan_state.scan_update_mutex); |
| k_mutex_init(&scan_state.scan_explicit_params_mutex); |
| bt_scan_softreset(); |
| } |
| |
| static int cmd_le_set_ext_scan_enable(bool enable, bool filter_duplicates, uint16_t duration) |
| { |
| struct bt_hci_cp_le_set_ext_scan_enable *cp; |
| struct bt_hci_cmd_state_set state; |
| struct net_buf *buf; |
| int err; |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_EXT_SCAN_ENABLE, sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| |
| cp->filter_dup = filter_duplicates; |
| cp->enable = enable; |
| cp->duration = sys_cpu_to_le16(duration); |
| cp->period = 0; |
| |
| bt_hci_cmd_state_set_init(buf, &state, bt_dev.flags, BT_DEV_SCANNING, |
| enable == BT_HCI_LE_SCAN_ENABLE); |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_EXT_SCAN_ENABLE, buf, NULL); |
| if (err) { |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_le_set_scan_enable_legacy(bool enable, bool filter_duplicates) |
| { |
| struct bt_hci_cp_le_set_scan_enable *cp; |
| struct bt_hci_cmd_state_set state; |
| struct net_buf *buf; |
| int err; |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_SCAN_ENABLE, sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| |
| cp->filter_dup = filter_duplicates; |
| cp->enable = enable; |
| |
| bt_hci_cmd_state_set_init(buf, &state, bt_dev.flags, BT_DEV_SCANNING, |
| enable == BT_HCI_LE_SCAN_ENABLE); |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_SCAN_ENABLE, buf, NULL); |
| if (err) { |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_le_set_scan_enable(bool enable, bool filter_duplicates) |
| { |
| if (IS_ENABLED(CONFIG_BT_EXT_ADV) && BT_DEV_FEAT_LE_EXT_ADV(bt_dev.le.features)) { |
| return cmd_le_set_ext_scan_enable(enable, filter_duplicates, 0); |
| } |
| |
| return cmd_le_set_scan_enable_legacy(enable, filter_duplicates); |
| } |
| |
| int bt_le_scan_set_enable(uint8_t enable) |
| { |
| return cmd_le_set_scan_enable(enable, scan_state.used_scan_param.options & |
| BT_LE_SCAN_OPT_FILTER_DUPLICATE); |
| } |
| |
| static int start_le_scan_ext(struct bt_le_scan_param *scan_param) |
| { |
| struct bt_hci_ext_scan_phy param_1m; |
| struct bt_hci_ext_scan_phy param_coded; |
| |
| struct bt_hci_ext_scan_phy *phy_1m = NULL; |
| struct bt_hci_ext_scan_phy *phy_coded = NULL; |
| |
| if (!(scan_param->options & BT_LE_SCAN_OPT_NO_1M)) { |
| param_1m.type = scan_param->type; |
| param_1m.interval = sys_cpu_to_le16(scan_param->interval); |
| param_1m.window = sys_cpu_to_le16(scan_param->window); |
| |
| phy_1m = ¶m_1m; |
| } |
| |
| if (scan_param->options & BT_LE_SCAN_OPT_CODED) { |
| uint16_t interval = scan_param->interval_coded ? scan_param->interval_coded |
| : scan_param->interval; |
| uint16_t window = |
| scan_param->window_coded ? scan_param->window_coded : scan_param->window; |
| |
| param_coded.type = scan_param->type; |
| param_coded.interval = sys_cpu_to_le16(interval); |
| param_coded.window = sys_cpu_to_le16(window); |
| phy_coded = ¶m_coded; |
| } |
| |
| struct bt_hci_cp_le_set_ext_scan_param *set_param; |
| struct net_buf *buf; |
| uint8_t own_addr_type; |
| bool active_scan; |
| int err; |
| |
| active_scan = (phy_1m && phy_1m->type == BT_HCI_LE_SCAN_ACTIVE) || |
| (phy_coded && phy_coded->type == BT_HCI_LE_SCAN_ACTIVE); |
| |
| if (scan_param->timeout > 0) { |
| atomic_set_bit(bt_dev.flags, BT_DEV_SCAN_LIMITED); |
| |
| /* Allow bt_le_oob_get_local to be called directly before |
| * starting a scan limited by timeout. |
| */ |
| if (IS_ENABLED(CONFIG_BT_PRIVACY) && !bt_id_rpa_is_new()) { |
| atomic_clear_bit(bt_dev.flags, BT_DEV_RPA_VALID); |
| } |
| } |
| |
| err = bt_id_set_scan_own_addr(active_scan, &own_addr_type); |
| if (err) { |
| return err; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_EXT_SCAN_PARAM, |
| sizeof(*set_param) + |
| (phy_1m ? sizeof(*phy_1m) : 0) + |
| (phy_coded ? sizeof(*phy_coded) : 0)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| set_param = net_buf_add(buf, sizeof(*set_param)); |
| set_param->own_addr_type = own_addr_type; |
| set_param->phys = 0; |
| set_param->filter_policy = scan_param->options & BT_LE_SCAN_OPT_FILTER_ACCEPT_LIST |
| ? BT_HCI_LE_SCAN_FP_BASIC_FILTER |
| : BT_HCI_LE_SCAN_FP_BASIC_NO_FILTER; |
| |
| if (phy_1m) { |
| set_param->phys |= BT_HCI_LE_EXT_SCAN_PHY_1M; |
| net_buf_add_mem(buf, phy_1m, sizeof(*phy_1m)); |
| } |
| |
| if (phy_coded) { |
| set_param->phys |= BT_HCI_LE_EXT_SCAN_PHY_CODED; |
| net_buf_add_mem(buf, phy_coded, sizeof(*phy_coded)); |
| } |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_EXT_SCAN_PARAM, buf, NULL); |
| if (err) { |
| return err; |
| } |
| |
| err = cmd_le_set_ext_scan_enable(BT_HCI_LE_SCAN_ENABLE, |
| scan_param->options & BT_LE_SCAN_OPT_FILTER_DUPLICATE, |
| scan_param->timeout); |
| if (err) { |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int start_le_scan_legacy(struct bt_le_scan_param *param) |
| { |
| struct bt_hci_cp_le_set_scan_param set_param; |
| struct net_buf *buf; |
| int err; |
| bool active_scan; |
| |
| (void)memset(&set_param, 0, sizeof(set_param)); |
| |
| set_param.scan_type = param->type; |
| |
| /* for the rest parameters apply default values according to |
| * spec 4.2, vol2, part E, 7.8.10 |
| */ |
| set_param.interval = sys_cpu_to_le16(param->interval); |
| set_param.window = sys_cpu_to_le16(param->window); |
| |
| if (IS_ENABLED(CONFIG_BT_FILTER_ACCEPT_LIST) && |
| param->options & BT_LE_SCAN_OPT_FILTER_ACCEPT_LIST) { |
| set_param.filter_policy = BT_HCI_LE_SCAN_FP_BASIC_FILTER; |
| } else { |
| set_param.filter_policy = BT_HCI_LE_SCAN_FP_BASIC_NO_FILTER; |
| } |
| |
| active_scan = param->type == BT_HCI_LE_SCAN_ACTIVE; |
| err = bt_id_set_scan_own_addr(active_scan, &set_param.addr_type); |
| if (err) { |
| return err; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_SCAN_PARAM, sizeof(set_param)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| net_buf_add_mem(buf, &set_param, sizeof(set_param)); |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_SCAN_PARAM, buf, NULL); |
| if (err) { |
| return err; |
| } |
| |
| err = cmd_le_set_scan_enable(BT_HCI_LE_SCAN_ENABLE, |
| param->options & BT_LE_SCAN_OPT_FILTER_DUPLICATE); |
| if (err) { |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| bool bt_le_scan_active_scanner_running(void) |
| { |
| return atomic_test_bit(bt_dev.flags, BT_DEV_SCANNING) && |
| scan_state.used_scan_param.type == BT_LE_SCAN_TYPE_ACTIVE; |
| } |
| |
| static void select_scan_params(struct bt_le_scan_param *scan_param) |
| { |
| /* From high priority to low priority: select parameters */ |
| /* 1. Priority: explicitly chosen parameters */ |
| if (atomic_test_bit(scan_state.scan_flags, BT_LE_SCAN_USER_EXPLICIT_SCAN)) { |
| memcpy(scan_param, &scan_state.explicit_scan_param, sizeof(*scan_param)); |
| } |
| /* Below this, the scanner module chooses the parameters. */ |
| /* 2. Priority: reuse parameters from initiator */ |
| else if (atomic_test_bit(bt_dev.flags, BT_DEV_INITIATING)) { |
| *scan_param = (struct bt_le_scan_param){ |
| .type = BT_LE_SCAN_TYPE_PASSIVE, |
| .options = BT_LE_SCAN_OPT_FILTER_DUPLICATE, |
| .interval = bt_dev.create_param.interval, |
| .window = bt_dev.create_param.window, |
| .timeout = 0, |
| .interval_coded = bt_dev.create_param.interval_coded, |
| .window_coded = bt_dev.create_param.window_coded, |
| }; |
| } |
| /* 3. Priority: choose custom parameters */ |
| else { |
| *scan_param = (struct bt_le_scan_param){ |
| .type = BT_LE_SCAN_TYPE_PASSIVE, |
| .options = BT_LE_SCAN_OPT_FILTER_DUPLICATE, |
| .interval = CONFIG_BT_BACKGROUND_SCAN_INTERVAL, |
| .window = CONFIG_BT_BACKGROUND_SCAN_WINDOW, |
| .timeout = 0, |
| .interval_coded = 0, |
| .window_coded = 0, |
| }; |
| |
| if (BT_FEAT_LE_PHY_CODED(bt_dev.le.features)) { |
| scan_param->options |= BT_LE_SCAN_OPT_CODED; |
| } |
| |
| if (atomic_test_bit(scan_state.scan_flags, BT_LE_SCAN_USER_PER_SYNC) || |
| atomic_test_bit(scan_state.scan_flags, BT_LE_SCAN_USER_CONN)) { |
| scan_param->window = BT_GAP_SCAN_FAST_WINDOW; |
| scan_param->interval = BT_GAP_SCAN_FAST_INTERVAL; |
| } |
| } |
| } |
| |
| static int start_scan(struct bt_le_scan_param *scan_param) |
| { |
| if (IS_ENABLED(CONFIG_BT_EXT_ADV) && BT_DEV_FEAT_LE_EXT_ADV(bt_dev.le.features)) { |
| return start_le_scan_ext(scan_param); |
| } |
| |
| return start_le_scan_legacy(scan_param); |
| } |
| |
| static bool is_already_using_same_params(struct bt_le_scan_param *scan_param) |
| { |
| return !memcmp(scan_param, &scan_state.used_scan_param, sizeof(*scan_param)); |
| } |
| |
| static enum scan_action get_scan_action(struct bt_le_scan_param *scan_param) |
| { |
| bool is_scanning = atomic_test_bit(bt_dev.flags, BT_DEV_SCANNING); |
| |
| /* Check if there is reason to have the scanner running */ |
| if (atomic_get(scan_state.scan_flags) != 0) { |
| if (is_scanning) { |
| if (is_already_using_same_params(scan_param)) { |
| /* Already scanning with the desired parameters */ |
| return SCAN_ACTION_NONE; |
| } else { |
| return SCAN_ACTION_UPDATE; |
| } |
| } else { |
| return SCAN_ACTION_START; |
| } |
| } else { |
| /* Scanner should not run */ |
| if (is_scanning) { |
| return SCAN_ACTION_STOP; |
| } else { |
| return SCAN_ACTION_NONE; |
| } |
| } |
| } |
| |
| static int scan_update(void) |
| { |
| int32_t err; |
| |
| struct bt_le_scan_param scan_param; |
| |
| /* Prevent partial updates of the scanner state. */ |
| err = k_mutex_lock(&scan_state.scan_update_mutex, K_NO_WAIT); |
| |
| if (err) { |
| return err; |
| } |
| |
| select_scan_params(&scan_param); |
| |
| enum scan_action action = get_scan_action(&scan_param); |
| |
| /* start/stop/update if required and allowed */ |
| switch (action) { |
| case SCAN_ACTION_NONE: |
| break; |
| case SCAN_ACTION_STOP: |
| err = cmd_le_set_scan_enable(BT_HCI_LE_SCAN_DISABLE, |
| BT_HCI_LE_SCAN_FILTER_DUP_DISABLE); |
| if (err) { |
| LOG_DBG("Could not stop scanner: %d", err); |
| break; |
| } |
| memset(&scan_state.used_scan_param, 0x0, |
| sizeof(scan_state.used_scan_param)); |
| break; |
| case SCAN_ACTION_UPDATE: |
| err = cmd_le_set_scan_enable(BT_HCI_LE_SCAN_DISABLE, |
| BT_HCI_LE_SCAN_FILTER_DUP_DISABLE); |
| if (err) { |
| LOG_DBG("Could not stop scanner to update: %d", err); |
| break; |
| } |
| __fallthrough; |
| case SCAN_ACTION_START: |
| err = start_scan(&scan_param); |
| if (err) { |
| LOG_DBG("Could not start scanner: %d", err); |
| break; |
| } |
| memcpy(&scan_state.used_scan_param, &scan_param, sizeof(scan_param)); |
| break; |
| } |
| |
| k_mutex_unlock(&scan_state.scan_update_mutex); |
| |
| return err; |
| } |
| |
| static int scan_check_if_state_allowed(enum bt_le_scan_user flag) |
| { |
| /* check if state is already set */ |
| if (atomic_test_bit(scan_state.scan_flags, flag)) { |
| return -EALREADY; |
| } |
| |
| if (flag == BT_LE_SCAN_USER_EXPLICIT_SCAN && !BT_LE_STATES_SCAN_INIT(bt_dev.le.states) && |
| atomic_test_bit(bt_dev.flags, BT_DEV_INITIATING)) { |
| return -EPERM; |
| } |
| |
| return 0; |
| } |
| |
| int bt_le_scan_user_add(enum bt_le_scan_user flag) |
| { |
| uint32_t err; |
| |
| if (flag == BT_LE_SCAN_USER_NONE) { |
| /* Only check if the scanner parameters should be updated / the scanner should be |
| * started. This is mainly triggered once connections are established. |
| */ |
| return scan_update(); |
| } |
| |
| err = scan_check_if_state_allowed(flag); |
| if (err) { |
| return err; |
| } |
| |
| atomic_set_bit(scan_state.scan_flags, flag); |
| |
| err = scan_update(); |
| if (err) { |
| atomic_clear_bit(scan_state.scan_flags, flag); |
| } |
| |
| return err; |
| } |
| |
| int bt_le_scan_user_remove(enum bt_le_scan_user flag) |
| { |
| if (flag == BT_LE_SCAN_USER_NONE) { |
| /* Only check if the scanner parameters should be updated / the scanner should be |
| * started. This is mainly triggered once connections are established. |
| */ |
| } else { |
| atomic_clear_bit(scan_state.scan_flags, flag); |
| } |
| |
| return scan_update(); |
| } |
| |
| #if defined(CONFIG_BT_CENTRAL) |
| static void check_pending_conn(const bt_addr_le_t *id_addr, |
| const bt_addr_le_t *addr, uint8_t adv_props) |
| { |
| struct bt_conn *conn; |
| int err; |
| |
| /* No connections are allowed during explicit scanning |
| * when the controller does not support concurrent scanning and initiating. |
| */ |
| if (!BT_LE_STATES_SCAN_INIT(bt_dev.le.states) && |
| atomic_test_bit(scan_state.scan_flags, BT_LE_SCAN_USER_EXPLICIT_SCAN)) { |
| return; |
| } |
| |
| /* Return if event is not connectable */ |
| if (!(adv_props & BT_HCI_LE_ADV_EVT_TYPE_CONN)) { |
| return; |
| } |
| |
| conn = bt_conn_lookup_state_le(BT_ID_DEFAULT, id_addr, |
| BT_CONN_SCAN_BEFORE_INITIATING); |
| if (!conn) { |
| return; |
| } |
| |
| /* Stop the scanner if there is no other reason to have it running. |
| * Ignore possible failures here, since the user is guaranteed to be removed |
| * and the scanner state is updated once the initiator starts / stops. |
| */ |
| err = bt_le_scan_user_remove(BT_LE_SCAN_USER_CONN); |
| if (err) { |
| LOG_DBG("Error while removing conn user from scanner (%d)", err); |
| } |
| |
| bt_addr_le_copy(&conn->le.resp_addr, addr); |
| if (bt_le_create_conn(conn)) { |
| goto failed; |
| } |
| |
| bt_conn_set_state(conn, BT_CONN_INITIATING); |
| bt_conn_unref(conn); |
| return; |
| |
| failed: |
| conn->err = BT_HCI_ERR_UNSPECIFIED; |
| bt_conn_set_state(conn, BT_CONN_DISCONNECTED); |
| bt_conn_unref(conn); |
| /* Just a best-effort check if the scanner should be started. */ |
| err = bt_le_scan_user_remove(BT_LE_SCAN_USER_NONE); |
| |
| if (err) { |
| LOG_WRN("Error while updating the scanner (%d)", err); |
| } |
| } |
| #endif /* CONFIG_BT_CENTRAL */ |
| |
| /* Convert Legacy adv report evt_type field to adv props */ |
| static uint8_t get_adv_props_legacy(uint8_t evt_type) |
| { |
| switch (evt_type) { |
| case BT_GAP_ADV_TYPE_ADV_IND: |
| return BT_GAP_ADV_PROP_CONNECTABLE | |
| BT_GAP_ADV_PROP_SCANNABLE; |
| |
| case BT_GAP_ADV_TYPE_ADV_DIRECT_IND: |
| return BT_GAP_ADV_PROP_CONNECTABLE | |
| BT_GAP_ADV_PROP_DIRECTED; |
| |
| case BT_GAP_ADV_TYPE_ADV_SCAN_IND: |
| return BT_GAP_ADV_PROP_SCANNABLE; |
| |
| case BT_GAP_ADV_TYPE_ADV_NONCONN_IND: |
| return 0; |
| |
| /* In legacy advertising report, we don't know if the scan |
| * response come from a connectable advertiser, so don't |
| * set connectable property bit. |
| */ |
| case BT_GAP_ADV_TYPE_SCAN_RSP: |
| return BT_GAP_ADV_PROP_SCAN_RESPONSE | |
| BT_GAP_ADV_PROP_SCANNABLE; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| static void le_adv_recv(bt_addr_le_t *addr, struct bt_le_scan_recv_info *info, |
| struct net_buf_simple *buf, uint16_t len) |
| { |
| struct bt_le_scan_cb *listener, *next; |
| struct net_buf_simple_state state; |
| bt_addr_le_t id_addr; |
| |
| LOG_DBG("%s event %u, len %u, rssi %d dBm", bt_addr_le_str(addr), info->adv_type, len, |
| info->rssi); |
| |
| if (!IS_ENABLED(CONFIG_BT_PRIVACY) && !IS_ENABLED(CONFIG_BT_SCAN_WITH_IDENTITY) && |
| atomic_test_bit(scan_state.scan_flags, BT_LE_SCAN_USER_EXPLICIT_SCAN) && |
| (info->adv_props & BT_HCI_LE_ADV_PROP_DIRECT)) { |
| LOG_DBG("Dropped direct adv report"); |
| return; |
| } |
| |
| if (bt_addr_le_is_resolved(addr)) { |
| bt_addr_le_copy_resolved(&id_addr, addr); |
| } else if (addr->type == BT_HCI_PEER_ADDR_ANONYMOUS) { |
| bt_addr_le_copy(&id_addr, BT_ADDR_LE_ANY); |
| } else { |
| bt_addr_le_copy(&id_addr, |
| bt_lookup_id_addr(BT_ID_DEFAULT, addr)); |
| } |
| |
| if (scan_dev_found_cb) { |
| net_buf_simple_save(buf, &state); |
| |
| buf->len = len; |
| scan_dev_found_cb(&id_addr, info->rssi, info->adv_type, buf); |
| |
| net_buf_simple_restore(buf, &state); |
| } |
| |
| info->addr = &id_addr; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&scan_cbs, listener, next, node) { |
| if (listener->recv) { |
| net_buf_simple_save(buf, &state); |
| |
| buf->len = len; |
| listener->recv(info, buf); |
| |
| net_buf_simple_restore(buf, &state); |
| } |
| } |
| |
| /* Clear pointer to this stack frame before returning to calling function */ |
| info->addr = NULL; |
| |
| #if defined(CONFIG_BT_CENTRAL) |
| check_pending_conn(&id_addr, addr, info->adv_props); |
| #endif /* CONFIG_BT_CENTRAL */ |
| } |
| |
| #if defined(CONFIG_BT_EXT_ADV) |
| void bt_hci_le_scan_timeout(struct net_buf *buf) |
| { |
| struct bt_le_scan_cb *listener, *next; |
| |
| int err = bt_le_scan_user_remove(BT_LE_SCAN_USER_EXPLICIT_SCAN); |
| |
| if (err) { |
| k_yield(); |
| err = bt_le_scan_user_remove(BT_LE_SCAN_USER_EXPLICIT_SCAN); |
| } |
| |
| if (err) { |
| LOG_WRN("Could not stop the explicit scanner (%d)", err); |
| } |
| |
| atomic_clear_bit(bt_dev.flags, BT_DEV_SCAN_LIMITED); |
| atomic_clear_bit(bt_dev.flags, BT_DEV_RPA_VALID); |
| |
| #if defined(CONFIG_BT_SMP) |
| bt_id_pending_keys_update(); |
| #endif |
| |
| SYS_SLIST_FOR_EACH_CONTAINER_SAFE(&scan_cbs, listener, next, node) { |
| if (listener->timeout) { |
| listener->timeout(); |
| } |
| } |
| } |
| |
| /* Convert Extended adv report evt_type field into adv type */ |
| static uint8_t get_adv_type(uint8_t evt_type) |
| { |
| switch (evt_type) { |
| case (BT_HCI_LE_ADV_EVT_TYPE_CONN | |
| BT_HCI_LE_ADV_EVT_TYPE_SCAN | |
| BT_HCI_LE_ADV_EVT_TYPE_LEGACY): |
| return BT_GAP_ADV_TYPE_ADV_IND; |
| |
| case (BT_HCI_LE_ADV_EVT_TYPE_CONN | |
| BT_HCI_LE_ADV_EVT_TYPE_DIRECT | |
| BT_HCI_LE_ADV_EVT_TYPE_LEGACY): |
| return BT_GAP_ADV_TYPE_ADV_DIRECT_IND; |
| |
| case (BT_HCI_LE_ADV_EVT_TYPE_SCAN | |
| BT_HCI_LE_ADV_EVT_TYPE_LEGACY): |
| return BT_GAP_ADV_TYPE_ADV_SCAN_IND; |
| |
| case BT_HCI_LE_ADV_EVT_TYPE_LEGACY: |
| return BT_GAP_ADV_TYPE_ADV_NONCONN_IND; |
| |
| case (BT_HCI_LE_ADV_EVT_TYPE_SCAN_RSP | |
| BT_HCI_LE_ADV_EVT_TYPE_CONN | |
| BT_HCI_LE_ADV_EVT_TYPE_SCAN | |
| BT_HCI_LE_ADV_EVT_TYPE_LEGACY): |
| case (BT_HCI_LE_ADV_EVT_TYPE_SCAN_RSP | |
| BT_HCI_LE_ADV_EVT_TYPE_SCAN | |
| BT_HCI_LE_ADV_EVT_TYPE_LEGACY): |
| /* Scan response from connectable or non-connectable advertiser. |
| */ |
| return BT_GAP_ADV_TYPE_SCAN_RSP; |
| |
| default: |
| return BT_GAP_ADV_TYPE_EXT_ADV; |
| } |
| } |
| |
| /* Convert extended adv report evt_type field to adv props */ |
| static uint16_t get_adv_props_extended(uint16_t evt_type) |
| { |
| /* Converts from BT_HCI_LE_ADV_EVT_TYPE_* to BT_GAP_ADV_PROP_* |
| * The first 4 bits are the same (conn, scan, direct, scan_rsp). |
| * Bit 4 must be flipped as the meaning of 1 is opposite (legacy -> extended) |
| * The rest of the bits are zeroed out. |
| */ |
| return (evt_type ^ BT_HCI_LE_ADV_EVT_TYPE_LEGACY) & BIT_MASK(5); |
| } |
| |
| static void create_ext_adv_info(struct bt_hci_evt_le_ext_advertising_info const *const evt, |
| struct bt_le_scan_recv_info *const scan_info) |
| { |
| scan_info->primary_phy = bt_get_phy(evt->prim_phy); |
| scan_info->secondary_phy = bt_get_phy(evt->sec_phy); |
| scan_info->tx_power = evt->tx_power; |
| scan_info->rssi = evt->rssi; |
| scan_info->sid = evt->sid; |
| scan_info->interval = sys_le16_to_cpu(evt->interval); |
| scan_info->adv_type = get_adv_type(sys_le16_to_cpu(evt->evt_type)); |
| scan_info->adv_props = get_adv_props_extended(sys_le16_to_cpu(evt->evt_type)); |
| } |
| |
| void bt_hci_le_adv_ext_report(struct net_buf *buf) |
| { |
| uint8_t num_reports = net_buf_pull_u8(buf); |
| |
| LOG_DBG("Adv number of reports %u", num_reports); |
| |
| while (num_reports--) { |
| struct bt_hci_evt_le_ext_advertising_info *evt; |
| struct bt_le_scan_recv_info scan_info; |
| uint16_t data_status; |
| uint16_t evt_type; |
| bool is_report_complete; |
| bool more_to_come; |
| bool is_new_advertiser; |
| |
| if (!atomic_test_bit(scan_state.scan_flags, BT_LE_SCAN_USER_EXPLICIT_SCAN)) { |
| /* The application has not requested explicit scan, so it is not expecting |
| * advertising reports. Discard, and reset the reassembler if not inactive |
| * This is done in the loop as this flag can change between each iteration, |
| * and it is not uncommon that scanning is disabled in the callback called |
| * from le_adv_recv |
| */ |
| |
| if (reassembling_advertiser.state != FRAG_ADV_INACTIVE) { |
| reset_reassembling_advertiser(); |
| } |
| |
| break; |
| } |
| |
| if (buf->len < sizeof(*evt)) { |
| LOG_ERR("Unexpected end of buffer"); |
| break; |
| } |
| |
| evt = net_buf_pull_mem(buf, sizeof(*evt)); |
| evt_type = sys_le16_to_cpu(evt->evt_type); |
| data_status = BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS(evt_type); |
| is_report_complete = data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_COMPLETE; |
| more_to_come = data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_PARTIAL; |
| |
| if (evt->length > buf->len) { |
| LOG_WRN("Adv report corrupted (wants %u out of %u)", evt->length, buf->len); |
| |
| net_buf_reset(buf); |
| |
| if (evt_type & BT_HCI_LE_ADV_EVT_TYPE_LEGACY) { |
| return; |
| } |
| |
| /* Start discarding irrespective of the `more_to_come` flag. We |
| * assume we may have lost a partial adv report in the truncated |
| * data. |
| */ |
| reassembling_advertiser.state = FRAG_ADV_DISCARDING; |
| |
| return; |
| } |
| |
| if (evt_type & BT_HCI_LE_ADV_EVT_TYPE_LEGACY) { |
| /* Legacy advertising reports are complete. |
| * Create event immediately. |
| */ |
| create_ext_adv_info(evt, &scan_info); |
| le_adv_recv(&evt->addr, &scan_info, &buf->b, evt->length); |
| goto cont; |
| } |
| |
| is_new_advertiser = reassembling_advertiser.state == FRAG_ADV_INACTIVE || |
| !fragmented_advertisers_equal(&reassembling_advertiser, |
| &evt->addr, evt->sid); |
| |
| if (is_new_advertiser && is_report_complete) { |
| /* Only advertising report from this advertiser. |
| * Create event immediately. |
| */ |
| create_ext_adv_info(evt, &scan_info); |
| le_adv_recv(&evt->addr, &scan_info, &buf->b, evt->length); |
| goto cont; |
| } |
| |
| if (is_new_advertiser && reassembling_advertiser.state == FRAG_ADV_REASSEMBLING) { |
| LOG_WRN("Received an incomplete advertising report while reassembling " |
| "advertising reports from a different advertiser. The advertising " |
| "report is discarded and future scan results may be incomplete. " |
| "Interleaving of fragmented advertising reports from different " |
| "advertisers is not yet supported."); |
| goto cont; |
| } |
| |
| if (data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_INCOMPLETE) { |
| /* Got HCI_LE_Extended_Advertising_Report: Incomplete, data truncated, no |
| * more to come. This means the Controller is aborting the reassembly. We |
| * discard the partially received report, and the application is not |
| * notified. |
| * |
| * See the Controller's documentation for possible reasons for aborting. |
| * Hint: CONFIG_BT_CTLR_SCAN_DATA_LEN_MAX. |
| */ |
| LOG_DBG("Discarding incomplete advertisement."); |
| reset_reassembling_advertiser(); |
| goto cont; |
| } |
| |
| if (is_new_advertiser) { |
| /* We are not reassembling reports from an advertiser and |
| * this is the first report from the new advertiser. |
| * Initialize the new advertiser. |
| */ |
| __ASSERT_NO_MSG(reassembling_advertiser.state == FRAG_ADV_INACTIVE); |
| init_reassembling_advertiser(&evt->addr, evt->sid); |
| } |
| |
| if (evt->length + ext_scan_buf.len > ext_scan_buf.size) { |
| /* The report does not fit in the reassemby buffer |
| * Discard this and future reports from the advertiser. |
| */ |
| reassembling_advertiser.state = FRAG_ADV_DISCARDING; |
| } |
| |
| if (reassembling_advertiser.state == FRAG_ADV_DISCARDING) { |
| if (!more_to_come) { |
| /* We do no longer need to keep track of this advertiser as |
| * all the expected data is received. |
| */ |
| reset_reassembling_advertiser(); |
| } |
| goto cont; |
| } |
| |
| net_buf_simple_add_mem(&ext_scan_buf, buf->data, evt->length); |
| if (more_to_come) { |
| /* The controller will send additional reports to be reassembled */ |
| continue; |
| } |
| |
| /* No more data coming from the controller. |
| * Create event. |
| */ |
| __ASSERT_NO_MSG(is_report_complete); |
| create_ext_adv_info(evt, &scan_info); |
| le_adv_recv(&evt->addr, &scan_info, &ext_scan_buf, ext_scan_buf.len); |
| |
| /* We do no longer need to keep track of this advertiser. */ |
| reset_reassembling_advertiser(); |
| |
| cont: |
| net_buf_pull(buf, evt->length); |
| } |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC) |
| static void per_adv_sync_delete(struct bt_le_per_adv_sync *per_adv_sync) |
| { |
| atomic_clear(per_adv_sync->flags); |
| } |
| |
| static struct bt_le_per_adv_sync *per_adv_sync_new(void) |
| { |
| struct bt_le_per_adv_sync *per_adv_sync = NULL; |
| |
| for (int i = 0; i < ARRAY_SIZE(per_adv_sync_pool); i++) { |
| if (!atomic_test_bit(per_adv_sync_pool[i].flags, |
| BT_PER_ADV_SYNC_CREATED)) { |
| per_adv_sync = &per_adv_sync_pool[i]; |
| break; |
| } |
| } |
| |
| if (!per_adv_sync) { |
| return NULL; |
| } |
| |
| (void)memset(per_adv_sync, 0, sizeof(*per_adv_sync)); |
| atomic_set_bit(per_adv_sync->flags, BT_PER_ADV_SYNC_CREATED); |
| |
| #if CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 |
| net_buf_simple_init_with_data(&per_adv_sync->reassembly, |
| per_adv_sync->reassembly_data, |
| CONFIG_BT_PER_ADV_SYNC_BUF_SIZE); |
| net_buf_simple_reset(&per_adv_sync->reassembly); |
| #endif /* CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 */ |
| |
| return per_adv_sync; |
| } |
| |
| static struct bt_le_per_adv_sync *get_pending_per_adv_sync(void) |
| { |
| for (int i = 0; i < ARRAY_SIZE(per_adv_sync_pool); i++) { |
| if (atomic_test_bit(per_adv_sync_pool[i].flags, |
| BT_PER_ADV_SYNC_SYNCING)) { |
| return &per_adv_sync_pool[i]; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void bt_periodic_sync_disable(void) |
| { |
| for (size_t i = 0; i < ARRAY_SIZE(per_adv_sync_pool); i++) { |
| per_adv_sync_delete(&per_adv_sync_pool[i]); |
| } |
| } |
| |
| struct bt_le_per_adv_sync *bt_hci_per_adv_sync_lookup_handle(uint16_t handle) |
| { |
| for (int i = 0; i < ARRAY_SIZE(per_adv_sync_pool); i++) { |
| if (per_adv_sync_pool[i].handle == handle && |
| atomic_test_bit(per_adv_sync_pool[i].flags, |
| BT_PER_ADV_SYNC_SYNCED)) { |
| return &per_adv_sync_pool[i]; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void bt_hci_le_per_adv_report_recv(struct bt_le_per_adv_sync *per_adv_sync, |
| struct net_buf_simple *buf, |
| const struct bt_le_per_adv_sync_recv_info *info) |
| { |
| struct net_buf_simple_state state; |
| struct bt_le_per_adv_sync_cb *listener; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&pa_sync_cbs, listener, node) { |
| if (listener->recv) { |
| net_buf_simple_save(buf, &state); |
| listener->recv(per_adv_sync, info, buf); |
| net_buf_simple_restore(buf, &state); |
| } |
| } |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) && (CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0) |
| static void bt_hci_le_per_adv_report_recv_failure(struct bt_le_per_adv_sync *per_adv_sync, |
| const struct bt_le_per_adv_sync_recv_info *info) |
| { |
| struct bt_le_per_adv_sync_cb *listener; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&pa_sync_cbs, listener, node) { |
| if (listener->recv) { |
| listener->recv(per_adv_sync, info, NULL); |
| } |
| } |
| } |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC_RSP) && (CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0) */ |
| |
| static void bt_hci_le_per_adv_report_common(struct net_buf *buf) |
| { |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| struct bt_hci_evt_le_per_advertising_report_v2 *evt; |
| #else |
| struct bt_hci_evt_le_per_advertising_report *evt; |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC_RSP) */ |
| |
| struct bt_le_per_adv_sync *per_adv_sync; |
| struct bt_le_per_adv_sync_recv_info info; |
| |
| if (buf->len < sizeof(*evt)) { |
| LOG_ERR("Unexpected end of buffer"); |
| return; |
| } |
| |
| evt = net_buf_pull_mem(buf, sizeof(*evt)); |
| |
| per_adv_sync = bt_hci_per_adv_sync_lookup_handle(sys_le16_to_cpu(evt->handle)); |
| |
| if (!per_adv_sync) { |
| LOG_ERR("Unknown handle 0x%04X for periodic advertising report", |
| sys_le16_to_cpu(evt->handle)); |
| return; |
| } |
| |
| if (atomic_test_bit(per_adv_sync->flags, |
| BT_PER_ADV_SYNC_RECV_DISABLED)) { |
| LOG_ERR("Received PA adv report when receive disabled"); |
| return; |
| } |
| |
| info.tx_power = evt->tx_power; |
| info.rssi = evt->rssi; |
| info.cte_type = bt_get_df_cte_type(evt->cte_type); |
| info.addr = &per_adv_sync->addr; |
| info.sid = per_adv_sync->sid; |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| info.periodic_event_counter = sys_le16_to_cpu(evt->periodic_event_counter); |
| info.subevent = evt->subevent; |
| #endif /* CONFIG_BT_PER_ADV_SYNC_RSP */ |
| |
| if (!per_adv_sync->report_truncated) { |
| #if CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 |
| if (net_buf_simple_tailroom(&per_adv_sync->reassembly) < evt->length) { |
| /* The buffer is too small for the entire report. Drop it */ |
| LOG_WRN("Buffer is too small to reassemble the report. " |
| "Use CONFIG_BT_PER_ADV_SYNC_BUF_SIZE to change " |
| "the buffer size."); |
| |
| per_adv_sync->report_truncated = true; |
| net_buf_simple_reset(&per_adv_sync->reassembly); |
| return; |
| } |
| |
| if (evt->data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_COMPLETE) { |
| if (per_adv_sync->reassembly.len == 0) { |
| /* We have not received any partial data before. |
| * This buffer can be forwarded without an extra copy. |
| */ |
| bt_hci_le_per_adv_report_recv(per_adv_sync, &buf->b, &info); |
| } else { |
| net_buf_simple_add_mem(&per_adv_sync->reassembly, |
| buf->data, evt->length); |
| bt_hci_le_per_adv_report_recv(per_adv_sync, |
| &per_adv_sync->reassembly, &info); |
| net_buf_simple_reset(&per_adv_sync->reassembly); |
| } |
| } else if (evt->data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_INCOMPLETE) { |
| LOG_DBG("Received incomplete advertising data. " |
| "Advertising report dropped."); |
| |
| net_buf_simple_reset(&per_adv_sync->reassembly); |
| |
| } else if (evt->data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_PARTIAL) { |
| net_buf_simple_add_mem(&per_adv_sync->reassembly, buf->data, evt->length); |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| } else if (evt->data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_RX_FAILED && |
| per_adv_sync->num_subevents) { |
| bt_hci_le_per_adv_report_recv_failure(per_adv_sync, &info); |
| #endif /* CONFIG_BT_PER_ADV_SYNC_RSP */ |
| } else { |
| __ASSERT(false, "Invalid data status 0x%02X", evt->data_status); |
| } |
| #else /* CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 */ |
| if (evt->data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_COMPLETE) { |
| bt_hci_le_per_adv_report_recv(per_adv_sync, &buf->b, &info); |
| } else { |
| per_adv_sync->report_truncated = true; |
| } |
| #endif /* CONFIG_BT_PER_ADV_SYNC_BUF_SIZE > 0 */ |
| } else if (evt->data_status == BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_COMPLETE) { |
| per_adv_sync->report_truncated = false; |
| } |
| } |
| |
| void bt_hci_le_per_adv_report(struct net_buf *buf) |
| { |
| if (IS_ENABLED(CONFIG_BT_PER_ADV_SYNC_RSP)) { |
| LOG_ERR("The controller shall raise the latest unmasked version of the event"); |
| |
| return; |
| } |
| |
| bt_hci_le_per_adv_report_common(buf); |
| } |
| |
| static int per_adv_sync_terminate(uint16_t handle) |
| { |
| struct bt_hci_cp_le_per_adv_terminate_sync *cp; |
| struct net_buf *buf; |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_PER_ADV_TERMINATE_SYNC, |
| sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| (void)memset(cp, 0, sizeof(*cp)); |
| |
| cp->handle = sys_cpu_to_le16(handle); |
| |
| return bt_hci_cmd_send_sync(BT_HCI_OP_LE_PER_ADV_TERMINATE_SYNC, buf, |
| NULL); |
| } |
| |
| static void per_adv_sync_terminated(struct bt_le_per_adv_sync *per_adv_sync, |
| uint8_t reason) |
| { |
| /* Terminate the PA sync and notify app */ |
| const struct bt_le_per_adv_sync_term_info term_info = { |
| .addr = &per_adv_sync->addr, |
| .sid = per_adv_sync->sid, |
| .reason = reason, |
| }; |
| struct bt_le_per_adv_sync_cb *listener; |
| |
| /* Deleting before callback, so the caller will be able |
| * to restart sync in the callback. |
| */ |
| per_adv_sync_delete(per_adv_sync); |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&pa_sync_cbs, listener, node) { |
| if (listener->term) { |
| listener->term(per_adv_sync, &term_info); |
| } |
| } |
| } |
| |
| static void bt_hci_le_per_adv_sync_established_common(struct net_buf *buf) |
| { |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| struct bt_hci_evt_le_per_adv_sync_established_v2 *evt = |
| (struct bt_hci_evt_le_per_adv_sync_established_v2 *)buf->data; |
| #else |
| struct bt_hci_evt_le_per_adv_sync_established *evt = |
| (struct bt_hci_evt_le_per_adv_sync_established *)buf->data; |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC_RSP) */ |
| |
| struct bt_le_per_adv_sync_synced_info sync_info; |
| struct bt_le_per_adv_sync *pending_per_adv_sync; |
| struct bt_le_per_adv_sync_cb *listener; |
| bt_addr_le_t id_addr; |
| bool unexpected_evt; |
| int err; |
| |
| pending_per_adv_sync = get_pending_per_adv_sync(); |
| |
| if (pending_per_adv_sync) { |
| atomic_clear_bit(pending_per_adv_sync->flags, BT_PER_ADV_SYNC_SYNCING); |
| err = bt_le_scan_user_remove(BT_LE_SCAN_USER_PER_SYNC); |
| |
| if (err) { |
| LOG_ERR("Could not update scan (%d)", err); |
| } |
| } |
| |
| if (evt->status == BT_HCI_ERR_OP_CANCELLED_BY_HOST) { |
| /* Cancelled locally, don't call CB */ |
| if (pending_per_adv_sync) { |
| per_adv_sync_delete(pending_per_adv_sync); |
| } else { |
| LOG_ERR("Unexpected per adv sync cancelled event"); |
| } |
| |
| return; |
| } |
| |
| if (bt_addr_le_is_resolved(&evt->adv_addr)) { |
| bt_addr_le_copy_resolved(&id_addr, &evt->adv_addr); |
| } else { |
| bt_addr_le_copy(&id_addr, |
| bt_lookup_id_addr(BT_ID_DEFAULT, |
| &evt->adv_addr)); |
| } |
| |
| if (!pending_per_adv_sync || |
| (!atomic_test_bit(pending_per_adv_sync->flags, |
| BT_PER_ADV_SYNC_SYNCING_USE_LIST) && |
| ((pending_per_adv_sync->sid != evt->sid) || |
| !bt_addr_le_eq(&pending_per_adv_sync->addr, &id_addr)))) { |
| LOG_ERR("Unexpected per adv sync established event"); |
| /* Request terminate of pending periodic advertising in controller */ |
| per_adv_sync_terminate(sys_le16_to_cpu(evt->handle)); |
| |
| unexpected_evt = true; |
| } else { |
| unexpected_evt = false; |
| } |
| |
| if (unexpected_evt || evt->status != BT_HCI_ERR_SUCCESS) { |
| if (pending_per_adv_sync) { |
| const uint8_t reason = unexpected_evt ? BT_HCI_ERR_UNSPECIFIED |
| : evt->status; |
| |
| if (atomic_test_bit(pending_per_adv_sync->flags, |
| BT_PER_ADV_SYNC_SYNCING_USE_LIST)) { |
| /* Update the addr and sid for the callback |
| * Already set if not using the sync list |
| */ |
| bt_addr_le_copy(&pending_per_adv_sync->addr, |
| &id_addr); |
| pending_per_adv_sync->sid = evt->sid; |
| } |
| |
| per_adv_sync_terminated(pending_per_adv_sync, reason); |
| } |
| return; |
| } |
| |
| pending_per_adv_sync->report_truncated = false; |
| |
| atomic_set_bit(pending_per_adv_sync->flags, BT_PER_ADV_SYNC_SYNCED); |
| |
| pending_per_adv_sync->handle = sys_le16_to_cpu(evt->handle); |
| pending_per_adv_sync->interval = sys_le16_to_cpu(evt->interval); |
| pending_per_adv_sync->clock_accuracy = |
| sys_le16_to_cpu(evt->clock_accuracy); |
| pending_per_adv_sync->phy = bt_get_phy(evt->phy); |
| |
| memset(&sync_info, 0, sizeof(sync_info)); |
| sync_info.interval = pending_per_adv_sync->interval; |
| sync_info.phy = pending_per_adv_sync->phy; |
| |
| if (atomic_test_bit(pending_per_adv_sync->flags, |
| BT_PER_ADV_SYNC_SYNCING_USE_LIST)) { |
| /* Now we know which address and SID we synchronized to. */ |
| pending_per_adv_sync->sid = evt->sid; |
| |
| if (bt_addr_le_is_resolved(&pending_per_adv_sync->addr)) { |
| bt_addr_le_copy_resolved(&pending_per_adv_sync->addr, |
| &id_addr); |
| } else { |
| bt_addr_le_copy(&pending_per_adv_sync->addr, &id_addr); |
| } |
| } |
| |
| sync_info.addr = &pending_per_adv_sync->addr; |
| sync_info.sid = pending_per_adv_sync->sid; |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| sync_info.num_subevents = evt->num_subevents; |
| sync_info.subevent_interval = evt->subevent_interval; |
| sync_info.response_slot_delay = evt->response_slot_delay; |
| sync_info.response_slot_spacing = evt->response_slot_spacing; |
| |
| pending_per_adv_sync->num_subevents = evt->num_subevents; |
| pending_per_adv_sync->subevent_interval = evt->subevent_interval; |
| pending_per_adv_sync->response_slot_delay = evt->response_slot_delay; |
| pending_per_adv_sync->response_slot_spacing = evt->response_slot_spacing; |
| #endif /* CONFIG_BT_PER_ADV_SYNC_RSP */ |
| |
| sync_info.recv_enabled = |
| !atomic_test_bit(pending_per_adv_sync->flags, |
| BT_PER_ADV_SYNC_RECV_DISABLED); |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&pa_sync_cbs, listener, node) { |
| if (listener->synced) { |
| listener->synced(pending_per_adv_sync, &sync_info); |
| } |
| } |
| } |
| |
| void bt_hci_le_per_adv_sync_established(struct net_buf *buf) |
| { |
| if (IS_ENABLED(CONFIG_BT_PER_ADV_SYNC_RSP)) { |
| LOG_ERR("The controller shall raise the latest unmasked version of the event"); |
| |
| return; |
| } |
| |
| bt_hci_le_per_adv_sync_established_common(buf); |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| int bt_le_per_adv_sync_subevent(struct bt_le_per_adv_sync *per_adv_sync, |
| struct bt_le_per_adv_sync_subevent_params *params) |
| { |
| struct bt_hci_cp_le_set_pawr_sync_subevent *cp; |
| struct net_buf *buf; |
| |
| if (params->num_subevents > BT_HCI_PAWR_SUBEVENT_MAX) { |
| return -EINVAL; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_PER_ADV_SYNC_SUBEVENT, |
| sizeof(*cp) + params->num_subevents); |
| |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| (void)memset(cp, 0, sizeof(*cp)); |
| cp->sync_handle = sys_cpu_to_le16(per_adv_sync->handle); |
| cp->periodic_adv_properties = sys_cpu_to_le16(params->properties); |
| cp->num_subevents = params->num_subevents; |
| net_buf_add_mem(buf, params->subevents, cp->num_subevents); |
| |
| return bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_PER_ADV_SYNC_SUBEVENT, buf, NULL); |
| } |
| |
| int bt_le_per_adv_set_response_data(struct bt_le_per_adv_sync *per_adv_sync, |
| const struct bt_le_per_adv_response_params *param, |
| const struct net_buf_simple *data) |
| { |
| struct bt_hci_cp_le_set_pawr_response_data *cp; |
| struct net_buf *buf; |
| |
| if (per_adv_sync->num_subevents == 0) { |
| return -EINVAL; |
| } |
| |
| if (param->request_subevent >= per_adv_sync->num_subevents) { |
| return -EINVAL; |
| } |
| |
| if (param->response_subevent >= per_adv_sync->num_subevents) { |
| return -EINVAL; |
| } |
| |
| if (data->len > 247) { |
| return -EINVAL; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_PER_ADV_RESPONSE_DATA, |
| sizeof(*cp) + data->len); |
| |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| (void)memset(cp, 0, sizeof(*cp)); |
| cp->sync_handle = sys_cpu_to_le16(per_adv_sync->handle); |
| cp->request_event = sys_cpu_to_le16(param->request_event); |
| cp->request_subevent = param->request_subevent; |
| cp->response_subevent = param->response_subevent; |
| cp->response_slot = param->response_slot; |
| cp->response_data_length = data->len; |
| |
| net_buf_add_mem(buf, data->data, cp->response_data_length); |
| |
| return bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_PER_ADV_RESPONSE_DATA, buf, NULL); |
| } |
| #endif /* CONFIG_BT_PER_ADV_SYNC_RSP */ |
| |
| void bt_hci_le_per_adv_sync_lost(struct net_buf *buf) |
| { |
| struct bt_hci_evt_le_per_adv_sync_lost *evt = |
| (struct bt_hci_evt_le_per_adv_sync_lost *)buf->data; |
| struct bt_le_per_adv_sync *per_adv_sync; |
| |
| per_adv_sync = bt_hci_per_adv_sync_lookup_handle(sys_le16_to_cpu(evt->handle)); |
| |
| if (!per_adv_sync) { |
| LOG_ERR("Unknown handle 0x%04Xfor periodic adv sync lost", |
| sys_le16_to_cpu(evt->handle)); |
| return; |
| } |
| |
| /* There is no status in the per. adv. sync lost event */ |
| per_adv_sync_terminated(per_adv_sync, BT_HCI_ERR_UNSPECIFIED); |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_TRANSFER_RECEIVER) |
| static uint8_t conn_past_modes[CONFIG_BT_MAX_CONN]; |
| static uint8_t default_past_mode; |
| |
| static void past_disconnected_cb(struct bt_conn *conn, uint8_t reason) |
| { |
| /* The core spec does not explicit state that the mode of a connection handle is cleared on |
| * disconnect, but let's assume it is. |
| */ |
| conn_past_modes[bt_conn_index(conn)] = BT_HCI_LE_PAST_MODE_NO_SYNC; |
| } |
| |
| BT_CONN_CB_DEFINE(past_conn_callbacks) = { |
| .disconnected = past_disconnected_cb, |
| }; |
| |
| static void bt_hci_le_past_received_common(struct net_buf *buf) |
| { |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| struct bt_hci_evt_le_past_received_v2 *evt = |
| (struct bt_hci_evt_le_past_received_v2 *)buf->data; |
| #else |
| struct bt_hci_evt_le_past_received *evt = |
| (struct bt_hci_evt_le_past_received *)buf->data; |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC_RSP) */ |
| |
| struct bt_le_per_adv_sync_synced_info sync_info; |
| struct bt_le_per_adv_sync_cb *listener; |
| struct bt_le_per_adv_sync *per_adv_sync; |
| bt_addr_le_t id_addr; |
| |
| if (evt->status) { |
| /* No sync created, don't notify app */ |
| LOG_DBG("PAST receive failed with status 0x%02X %s", |
| evt->status, bt_hci_err_to_str(evt->status)); |
| return; |
| } |
| |
| sync_info.conn = bt_conn_lookup_handle( |
| sys_le16_to_cpu(evt->conn_handle), |
| BT_CONN_TYPE_LE); |
| |
| if (!sync_info.conn) { |
| LOG_ERR("Could not lookup connection handle from PAST"); |
| per_adv_sync_terminate(sys_le16_to_cpu(evt->sync_handle)); |
| return; |
| } |
| |
| per_adv_sync = per_adv_sync_new(); |
| if (!per_adv_sync) { |
| LOG_WRN("Could not allocate new PA sync from PAST"); |
| per_adv_sync_terminate(sys_le16_to_cpu(evt->sync_handle)); |
| bt_conn_unref(sync_info.conn); |
| return; |
| } |
| |
| atomic_set_bit(per_adv_sync->flags, BT_PER_ADV_SYNC_SYNCED); |
| |
| if (bt_addr_le_is_resolved(&evt->addr)) { |
| bt_addr_le_copy_resolved(&id_addr, &evt->addr); |
| } else { |
| bt_addr_le_copy(&id_addr, |
| bt_lookup_id_addr(BT_ID_DEFAULT, &evt->addr)); |
| } |
| |
| per_adv_sync->handle = sys_le16_to_cpu(evt->sync_handle); |
| per_adv_sync->interval = sys_le16_to_cpu(evt->interval); |
| per_adv_sync->clock_accuracy = sys_le16_to_cpu(evt->clock_accuracy); |
| per_adv_sync->phy = bt_get_phy(evt->phy); |
| bt_addr_le_copy(&per_adv_sync->addr, &id_addr); |
| per_adv_sync->sid = evt->adv_sid; |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| per_adv_sync->num_subevents = evt->num_subevents; |
| per_adv_sync->subevent_interval = evt->subevent_interval; |
| per_adv_sync->response_slot_delay = evt->response_slot_delay; |
| per_adv_sync->response_slot_spacing = evt->response_slot_spacing; |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC_RSP) */ |
| |
| sync_info.interval = per_adv_sync->interval; |
| sync_info.phy = per_adv_sync->phy; |
| sync_info.addr = &per_adv_sync->addr; |
| sync_info.sid = per_adv_sync->sid; |
| sync_info.service_data = sys_le16_to_cpu(evt->service_data); |
| |
| const uint8_t mode = conn_past_modes[bt_conn_index(sync_info.conn)]; |
| |
| if (mode == BT_HCI_LE_PAST_MODE_NO_SYNC) { |
| /* Use the default parameter mode as the conn specific mode is not set */ |
| sync_info.recv_enabled = |
| default_past_mode == BT_HCI_LE_PAST_MODE_SYNC || |
| default_past_mode == BT_HCI_LE_PAST_MODE_SYNC_FILTER_DUPLICATES; |
| } else { |
| sync_info.recv_enabled = mode == BT_HCI_LE_PAST_MODE_SYNC || |
| mode == BT_HCI_LE_PAST_MODE_SYNC_FILTER_DUPLICATES; |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| sync_info.num_subevents = per_adv_sync->num_subevents; |
| sync_info.subevent_interval = per_adv_sync->subevent_interval; |
| sync_info.response_slot_delay = per_adv_sync->response_slot_delay; |
| sync_info.response_slot_spacing = per_adv_sync->response_slot_spacing; |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC_RSP) */ |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&pa_sync_cbs, listener, node) { |
| if (listener->synced) { |
| listener->synced(per_adv_sync, &sync_info); |
| } |
| } |
| |
| bt_conn_unref(sync_info.conn); |
| } |
| |
| void bt_hci_le_past_received(struct net_buf *buf) |
| { |
| if (IS_ENABLED(CONFIG_BT_PER_ADV_SYNC_RSP)) { |
| LOG_ERR("The controller shall raise the latest unmasked version of the event"); |
| |
| return; |
| } |
| |
| bt_hci_le_past_received_common(buf); |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| void bt_hci_le_past_received_v2(struct net_buf *buf) |
| { |
| bt_hci_le_past_received_common(buf); |
| } |
| #endif /* CONFIG_BT_PER_ADV_SYNC_RSP */ |
| #endif /* CONFIG_BT_PER_ADV_SYNC_TRANSFER_RECEIVER */ |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_RSP) |
| void bt_hci_le_per_adv_sync_established_v2(struct net_buf *buf) |
| { |
| bt_hci_le_per_adv_sync_established_common(buf); |
| } |
| |
| void bt_hci_le_per_adv_report_v2(struct net_buf *buf) |
| { |
| bt_hci_le_per_adv_report_common(buf); |
| } |
| #endif /* CONFIG_BT_PER_ADV_SYNC_RSP */ |
| |
| #if defined(CONFIG_BT_ISO_BROADCAST) |
| void bt_hci_le_biginfo_adv_report(struct net_buf *buf) |
| { |
| struct bt_hci_evt_le_biginfo_adv_report *evt; |
| struct bt_le_per_adv_sync *per_adv_sync; |
| struct bt_le_per_adv_sync_cb *listener; |
| struct bt_iso_biginfo biginfo; |
| |
| evt = net_buf_pull_mem(buf, sizeof(*evt)); |
| |
| per_adv_sync = bt_hci_per_adv_sync_lookup_handle(sys_le16_to_cpu(evt->sync_handle)); |
| |
| if (!per_adv_sync) { |
| LOG_ERR("Unknown handle 0x%04X for periodic advertising report", |
| sys_le16_to_cpu(evt->sync_handle)); |
| return; |
| } |
| |
| biginfo.addr = &per_adv_sync->addr; |
| biginfo.sid = per_adv_sync->sid; |
| biginfo.num_bis = evt->num_bis; |
| biginfo.sub_evt_count = evt->nse; |
| biginfo.iso_interval = sys_le16_to_cpu(evt->iso_interval); |
| biginfo.burst_number = evt->bn; |
| biginfo.offset = evt->pto; |
| biginfo.rep_count = evt->irc; |
| biginfo.max_pdu = sys_le16_to_cpu(evt->max_pdu); |
| biginfo.sdu_interval = sys_get_le24(evt->sdu_interval); |
| biginfo.max_sdu = sys_le16_to_cpu(evt->max_sdu); |
| biginfo.phy = bt_get_phy(evt->phy); |
| biginfo.framing = evt->framing; |
| biginfo.encryption = evt->encryption ? true : false; |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&pa_sync_cbs, listener, node) { |
| if (listener->biginfo) { |
| listener->biginfo(per_adv_sync, &biginfo); |
| } |
| } |
| } |
| #endif /* CONFIG_BT_ISO_BROADCAST */ |
| #if defined(CONFIG_BT_DF_CONNECTIONLESS_CTE_RX) |
| static void bt_hci_le_df_connectionless_iq_report_common(uint8_t event, struct net_buf *buf) |
| { |
| int err; |
| |
| struct bt_df_per_adv_sync_iq_samples_report cte_report; |
| struct bt_le_per_adv_sync *per_adv_sync; |
| struct bt_le_per_adv_sync_cb *listener; |
| |
| if (event == BT_HCI_EVT_LE_CONNECTIONLESS_IQ_REPORT) { |
| err = hci_df_prepare_connectionless_iq_report(buf, &cte_report, &per_adv_sync); |
| if (err) { |
| LOG_ERR("Prepare CTE conn IQ report failed %d", err); |
| return; |
| } |
| } else if (IS_ENABLED(CONFIG_BT_DF_VS_CL_IQ_REPORT_16_BITS_IQ_SAMPLES) && |
| event == BT_HCI_EVT_VS_LE_CONNECTIONLESS_IQ_REPORT) { |
| err = hci_df_vs_prepare_connectionless_iq_report(buf, &cte_report, &per_adv_sync); |
| if (err) { |
| LOG_ERR("Prepare CTE conn IQ report failed %d", err); |
| return; |
| } |
| } else { |
| LOG_ERR("Unhandled VS connectionless IQ report"); |
| return; |
| } |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&pa_sync_cbs, listener, node) { |
| if (listener->cte_report_cb) { |
| listener->cte_report_cb(per_adv_sync, &cte_report); |
| } |
| } |
| } |
| |
| void bt_hci_le_df_connectionless_iq_report(struct net_buf *buf) |
| { |
| bt_hci_le_df_connectionless_iq_report_common(BT_HCI_EVT_LE_CONNECTIONLESS_IQ_REPORT, buf); |
| } |
| |
| #if defined(CONFIG_BT_DF_VS_CL_IQ_REPORT_16_BITS_IQ_SAMPLES) |
| void bt_hci_le_vs_df_connectionless_iq_report(struct net_buf *buf) |
| { |
| bt_hci_le_df_connectionless_iq_report_common(BT_HCI_EVT_VS_LE_CONNECTIONLESS_IQ_REPORT, |
| buf); |
| } |
| #endif /* CONFIG_BT_DF_VS_CL_IQ_REPORT_16_BITS_IQ_SAMPLES */ |
| #endif /* CONFIG_BT_DF_CONNECTIONLESS_CTE_RX */ |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC) */ |
| #endif /* defined(CONFIG_BT_EXT_ADV) */ |
| |
| void bt_hci_le_adv_report(struct net_buf *buf) |
| { |
| uint8_t num_reports = net_buf_pull_u8(buf); |
| struct bt_hci_evt_le_advertising_info *evt; |
| |
| LOG_DBG("Adv number of reports %u", num_reports); |
| |
| while (num_reports--) { |
| struct bt_le_scan_recv_info adv_info; |
| |
| if (!atomic_test_bit(scan_state.scan_flags, BT_LE_SCAN_USER_EXPLICIT_SCAN)) { |
| /* The application has not requested explicit scan, so it is not expecting |
| * advertising reports. Discard. |
| * This is done in the loop as this flag can change between each iteration, |
| * and it is not uncommon that scanning is disabled in the callback called |
| * from le_adv_recv |
| */ |
| |
| break; |
| } |
| |
| if (buf->len < sizeof(*evt)) { |
| LOG_ERR("Unexpected end of buffer"); |
| break; |
| } |
| |
| evt = net_buf_pull_mem(buf, sizeof(*evt)); |
| |
| if (buf->len < evt->length + sizeof(adv_info.rssi)) { |
| LOG_ERR("Unexpected end of buffer"); |
| break; |
| } |
| |
| adv_info.primary_phy = BT_GAP_LE_PHY_1M; |
| adv_info.secondary_phy = 0; |
| adv_info.tx_power = BT_GAP_TX_POWER_INVALID; |
| adv_info.rssi = evt->data[evt->length]; |
| adv_info.sid = BT_GAP_SID_INVALID; |
| adv_info.interval = 0U; |
| |
| adv_info.adv_type = evt->evt_type; |
| adv_info.adv_props = get_adv_props_legacy(evt->evt_type); |
| |
| le_adv_recv(&evt->addr, &adv_info, &buf->b, evt->length); |
| |
| net_buf_pull(buf, evt->length + sizeof(adv_info.rssi)); |
| } |
| } |
| |
| static bool valid_le_scan_param(const struct bt_le_scan_param *param) |
| { |
| if (IS_ENABLED(CONFIG_BT_PRIVACY) && |
| param->type == BT_LE_SCAN_TYPE_ACTIVE && |
| param->timeout != 0) { |
| /* This is marked as not supported as a stopgap until the (scan, |
| * adv, init) roles are reworked into proper state machines. |
| * |
| * Having proper state machines is necessary to be able to |
| * suspend all roles that use the (resolvable) private address, |
| * update the RPA and resume them again with the right |
| * parameters. |
| * |
| * Else we lower the privacy of the device as either the RPA |
| * update will fail or the scanner will not use the newly |
| * generated RPA. |
| */ |
| return false; |
| } |
| |
| if (param->type != BT_LE_SCAN_TYPE_PASSIVE && |
| param->type != BT_LE_SCAN_TYPE_ACTIVE) { |
| return false; |
| } |
| |
| if (param->options & ~(BT_LE_SCAN_OPT_FILTER_DUPLICATE | |
| BT_LE_SCAN_OPT_FILTER_ACCEPT_LIST | |
| BT_LE_SCAN_OPT_CODED | |
| BT_LE_SCAN_OPT_NO_1M)) { |
| return false; |
| } |
| |
| if (param->interval < 0x0004 || param->interval > 0x4000) { |
| return false; |
| } |
| |
| if (param->window < 0x0004 || param->window > 0x4000) { |
| return false; |
| } |
| |
| if (param->window > param->interval) { |
| return false; |
| } |
| |
| return true; |
| } |
| |
| int bt_le_scan_start(const struct bt_le_scan_param *param, bt_le_scan_cb_t cb) |
| { |
| int err; |
| |
| if (!atomic_test_bit(bt_dev.flags, BT_DEV_READY)) { |
| return -EAGAIN; |
| } |
| |
| /* Check that the parameters have valid values */ |
| if (!valid_le_scan_param(param)) { |
| return -EINVAL; |
| } |
| |
| if (param->type && !bt_id_scan_random_addr_check()) { |
| return -EINVAL; |
| } |
| |
| /* Prevent multiple threads to try to enable explicit scanning at the same time. |
| * That could lead to unwanted overwriting of scan_state.explicit_scan_param. |
| */ |
| err = k_mutex_lock(&scan_state.scan_explicit_params_mutex, K_NO_WAIT); |
| |
| if (err) { |
| return err; |
| } |
| |
| err = scan_check_if_state_allowed(BT_LE_SCAN_USER_EXPLICIT_SCAN); |
| |
| if (err) { |
| k_mutex_unlock(&scan_state.scan_explicit_params_mutex); |
| return err; |
| } |
| |
| /* store the parameters that were used to start the scanner */ |
| memcpy(&scan_state.explicit_scan_param, param, |
| sizeof(scan_state.explicit_scan_param)); |
| |
| scan_dev_found_cb = cb; |
| err = bt_le_scan_user_add(BT_LE_SCAN_USER_EXPLICIT_SCAN); |
| k_mutex_unlock(&scan_state.scan_explicit_params_mutex); |
| |
| return err; |
| } |
| |
| int bt_le_scan_stop(void) |
| { |
| bt_scan_softreset(); |
| scan_dev_found_cb = NULL; |
| |
| if (IS_ENABLED(CONFIG_BT_EXT_ADV) && |
| atomic_test_and_clear_bit(bt_dev.flags, BT_DEV_SCAN_LIMITED)) { |
| atomic_clear_bit(bt_dev.flags, BT_DEV_RPA_VALID); |
| |
| #if defined(CONFIG_BT_SMP) |
| bt_id_pending_keys_update(); |
| #endif |
| } |
| |
| return bt_le_scan_user_remove(BT_LE_SCAN_USER_EXPLICIT_SCAN); |
| } |
| |
| int bt_le_scan_cb_register(struct bt_le_scan_cb *cb) |
| { |
| if (sys_slist_find(&scan_cbs, &cb->node, NULL)) { |
| return -EEXIST; |
| } |
| |
| sys_slist_append(&scan_cbs, &cb->node); |
| |
| return 0; |
| } |
| |
| void bt_le_scan_cb_unregister(struct bt_le_scan_cb *cb) |
| { |
| sys_slist_find_and_remove(&scan_cbs, &cb->node); |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC) |
| uint8_t bt_le_per_adv_sync_get_index(struct bt_le_per_adv_sync *per_adv_sync) |
| { |
| ptrdiff_t index = per_adv_sync - per_adv_sync_pool; |
| |
| __ASSERT(index >= 0 && ARRAY_SIZE(per_adv_sync_pool) > index, |
| "Invalid per_adv_sync pointer"); |
| return (uint8_t)index; |
| } |
| |
| struct bt_le_per_adv_sync *bt_le_per_adv_sync_lookup_index(uint8_t index) |
| { |
| if (index >= ARRAY_SIZE(per_adv_sync_pool)) { |
| return NULL; |
| } |
| |
| return &per_adv_sync_pool[index]; |
| } |
| |
| int bt_le_per_adv_sync_get_info(struct bt_le_per_adv_sync *per_adv_sync, |
| struct bt_le_per_adv_sync_info *info) |
| { |
| CHECKIF(per_adv_sync == NULL || info == NULL) { |
| return -EINVAL; |
| } |
| |
| bt_addr_le_copy(&info->addr, &per_adv_sync->addr); |
| info->sid = per_adv_sync->sid; |
| info->phy = per_adv_sync->phy; |
| info->interval = per_adv_sync->interval; |
| |
| return 0; |
| } |
| |
| struct bt_le_per_adv_sync *bt_le_per_adv_sync_lookup_addr(const bt_addr_le_t *adv_addr, |
| uint8_t sid) |
| { |
| for (int i = 0; i < ARRAY_SIZE(per_adv_sync_pool); i++) { |
| struct bt_le_per_adv_sync *sync = &per_adv_sync_pool[i]; |
| |
| if (!atomic_test_bit(per_adv_sync_pool[i].flags, |
| BT_PER_ADV_SYNC_CREATED)) { |
| continue; |
| } |
| |
| if (bt_addr_le_eq(&sync->addr, adv_addr) && sync->sid == sid) { |
| return sync; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| int bt_le_per_adv_sync_create(const struct bt_le_per_adv_sync_param *param, |
| struct bt_le_per_adv_sync **out_sync) |
| { |
| struct bt_hci_cp_le_per_adv_create_sync *cp; |
| struct net_buf *buf; |
| struct bt_le_per_adv_sync *per_adv_sync; |
| int err; |
| |
| if (!BT_FEAT_LE_EXT_PER_ADV(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } |
| |
| if (get_pending_per_adv_sync()) { |
| return -EBUSY; |
| } |
| |
| if (param->sid > BT_GAP_SID_MAX || |
| param->skip > BT_GAP_PER_ADV_MAX_SKIP || |
| param->timeout > BT_GAP_PER_ADV_MAX_TIMEOUT || |
| param->timeout < BT_GAP_PER_ADV_MIN_TIMEOUT) { |
| return -EINVAL; |
| } |
| |
| per_adv_sync = per_adv_sync_new(); |
| if (!per_adv_sync) { |
| return -ENOMEM; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_PER_ADV_CREATE_SYNC, sizeof(*cp)); |
| if (!buf) { |
| per_adv_sync_delete(per_adv_sync); |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| (void)memset(cp, 0, sizeof(*cp)); |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_OPT_USE_PER_ADV_LIST) { |
| atomic_set_bit(per_adv_sync->flags, |
| BT_PER_ADV_SYNC_SYNCING_USE_LIST); |
| |
| cp->options |= BT_HCI_LE_PER_ADV_CREATE_SYNC_FP_USE_LIST; |
| } else { |
| /* If BT_LE_PER_ADV_SYNC_OPT_USE_PER_ADV_LIST is set, then the |
| * address and SID are ignored by the controller, so we only |
| * copy/assign them in case that the periodic advertising list |
| * is not used. |
| */ |
| bt_addr_le_copy(&cp->addr, ¶m->addr); |
| cp->sid = param->sid; |
| } |
| |
| if (param->options & |
| BT_LE_PER_ADV_SYNC_OPT_REPORTING_INITIALLY_DISABLED) { |
| cp->options |= |
| BT_HCI_LE_PER_ADV_CREATE_SYNC_FP_REPORTS_DISABLED; |
| |
| atomic_set_bit(per_adv_sync->flags, |
| BT_PER_ADV_SYNC_RECV_DISABLED); |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_OPT_FILTER_DUPLICATE) { |
| cp->options |= |
| BT_HCI_LE_PER_ADV_CREATE_SYNC_FP_FILTER_DUPLICATE; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOA) { |
| cp->cte_type |= BT_HCI_LE_PER_ADV_CREATE_SYNC_CTE_TYPE_NO_AOA; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOD_1US) { |
| cp->cte_type |= |
| BT_HCI_LE_PER_ADV_CREATE_SYNC_CTE_TYPE_NO_AOD_1US; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_OPT_DONT_SYNC_AOD_2US) { |
| cp->cte_type |= |
| BT_HCI_LE_PER_ADV_CREATE_SYNC_CTE_TYPE_NO_AOD_2US; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_OPT_SYNC_ONLY_CONST_TONE_EXT) { |
| cp->cte_type |= BT_HCI_LE_PER_ADV_CREATE_SYNC_CTE_TYPE_ONLY_CTE; |
| } |
| |
| cp->skip = sys_cpu_to_le16(param->skip); |
| cp->sync_timeout = sys_cpu_to_le16(param->timeout); |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_PER_ADV_CREATE_SYNC, buf, NULL); |
| if (err) { |
| per_adv_sync_delete(per_adv_sync); |
| return err; |
| } |
| |
| atomic_set_bit(per_adv_sync->flags, BT_PER_ADV_SYNC_SYNCING); |
| |
| /* Syncing requires that scan is enabled. If the caller doesn't enable |
| * scan first, we enable it here, and disable it once the sync has been |
| * established. We don't need to use any callbacks since we rely on |
| * the advertiser address in the sync params. |
| */ |
| err = bt_le_scan_user_add(BT_LE_SCAN_USER_PER_SYNC); |
| if (err) { |
| int per_sync_remove_err = bt_le_scan_user_remove(BT_LE_SCAN_USER_PER_SYNC); |
| |
| if (per_sync_remove_err) { |
| LOG_WRN("Error while updating the scanner (%d)", per_sync_remove_err); |
| } |
| |
| bt_le_per_adv_sync_delete(per_adv_sync); |
| return err; |
| } |
| |
| *out_sync = per_adv_sync; |
| bt_addr_le_copy(&per_adv_sync->addr, ¶m->addr); |
| per_adv_sync->sid = param->sid; |
| |
| return 0; |
| } |
| |
| static int bt_le_per_adv_sync_create_cancel( |
| struct bt_le_per_adv_sync *per_adv_sync) |
| { |
| struct net_buf *buf; |
| int err; |
| |
| if (get_pending_per_adv_sync() != per_adv_sync) { |
| return -EINVAL; |
| } |
| |
| err = bt_le_scan_user_remove(BT_LE_SCAN_USER_PER_SYNC); |
| |
| if (err) { |
| return err; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_PER_ADV_CREATE_SYNC_CANCEL, 0); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_PER_ADV_CREATE_SYNC_CANCEL, buf, |
| NULL); |
| if (err) { |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int bt_le_per_adv_sync_terminate(struct bt_le_per_adv_sync *per_adv_sync) |
| { |
| int err; |
| |
| if (!atomic_test_bit(per_adv_sync->flags, BT_PER_ADV_SYNC_SYNCED)) { |
| return -EINVAL; |
| } |
| |
| err = per_adv_sync_terminate(per_adv_sync->handle); |
| |
| if (err) { |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| int bt_le_per_adv_sync_delete(struct bt_le_per_adv_sync *per_adv_sync) |
| { |
| int err = 0; |
| |
| if (!BT_FEAT_LE_EXT_PER_ADV(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } |
| |
| if (atomic_test_bit(per_adv_sync->flags, BT_PER_ADV_SYNC_SYNCED)) { |
| err = bt_le_per_adv_sync_terminate(per_adv_sync); |
| |
| if (!err) { |
| per_adv_sync_terminated(per_adv_sync, |
| BT_HCI_ERR_LOCALHOST_TERM_CONN); |
| } |
| } else if (get_pending_per_adv_sync() == per_adv_sync) { |
| err = bt_le_per_adv_sync_create_cancel(per_adv_sync); |
| /* Delete of the per_adv_sync will be done in the event |
| * handler when cancelling. |
| */ |
| } |
| |
| return err; |
| } |
| |
| int bt_le_per_adv_sync_cb_register(struct bt_le_per_adv_sync_cb *cb) |
| { |
| if (sys_slist_find(&pa_sync_cbs, &cb->node, NULL)) { |
| return -EEXIST; |
| } |
| |
| sys_slist_append(&pa_sync_cbs, &cb->node); |
| |
| return 0; |
| } |
| |
| static int bt_le_set_per_adv_recv_enable( |
| struct bt_le_per_adv_sync *per_adv_sync, bool enable) |
| { |
| struct bt_hci_cp_le_set_per_adv_recv_enable *cp; |
| struct bt_le_per_adv_sync_cb *listener; |
| struct bt_le_per_adv_sync_state_info info; |
| struct net_buf *buf; |
| struct bt_hci_cmd_state_set state; |
| int err; |
| |
| if (!atomic_test_bit(bt_dev.flags, BT_DEV_READY)) { |
| return -EAGAIN; |
| } |
| |
| if (!BT_FEAT_LE_EXT_PER_ADV(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } |
| |
| if (!atomic_test_bit(per_adv_sync->flags, BT_PER_ADV_SYNC_SYNCED)) { |
| return -EINVAL; |
| } |
| |
| if ((enable && !atomic_test_bit(per_adv_sync->flags, |
| BT_PER_ADV_SYNC_RECV_DISABLED)) || |
| (!enable && atomic_test_bit(per_adv_sync->flags, |
| BT_PER_ADV_SYNC_RECV_DISABLED))) { |
| return -EALREADY; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_SET_PER_ADV_RECV_ENABLE, |
| sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| (void)memset(cp, 0, sizeof(*cp)); |
| |
| cp->handle = sys_cpu_to_le16(per_adv_sync->handle); |
| cp->enable = enable ? 1 : 0; |
| |
| bt_hci_cmd_state_set_init(buf, &state, per_adv_sync->flags, |
| BT_PER_ADV_SYNC_RECV_DISABLED, !enable); |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_SET_PER_ADV_RECV_ENABLE, |
| buf, NULL); |
| |
| if (err) { |
| return err; |
| } |
| |
| info.recv_enabled = !atomic_test_bit(per_adv_sync->flags, |
| BT_PER_ADV_SYNC_RECV_DISABLED); |
| |
| SYS_SLIST_FOR_EACH_CONTAINER(&pa_sync_cbs, listener, node) { |
| if (listener->state_changed) { |
| listener->state_changed(per_adv_sync, &info); |
| } |
| } |
| |
| return 0; |
| } |
| |
| int bt_le_per_adv_sync_recv_enable(struct bt_le_per_adv_sync *per_adv_sync) |
| { |
| return bt_le_set_per_adv_recv_enable(per_adv_sync, true); |
| } |
| |
| int bt_le_per_adv_sync_recv_disable(struct bt_le_per_adv_sync *per_adv_sync) |
| { |
| return bt_le_set_per_adv_recv_enable(per_adv_sync, false); |
| } |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_TRANSFER_SENDER) |
| int bt_le_per_adv_sync_transfer(const struct bt_le_per_adv_sync *per_adv_sync, |
| const struct bt_conn *conn, |
| uint16_t service_data) |
| { |
| struct bt_hci_cp_le_per_adv_sync_transfer *cp; |
| struct net_buf *buf; |
| |
| |
| if (!BT_FEAT_LE_EXT_PER_ADV(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } else if (!BT_FEAT_LE_PAST_SEND(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_PER_ADV_SYNC_TRANSFER, |
| sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| (void)memset(cp, 0, sizeof(*cp)); |
| |
| cp->conn_handle = sys_cpu_to_le16(conn->handle); |
| cp->sync_handle = sys_cpu_to_le16(per_adv_sync->handle); |
| cp->service_data = sys_cpu_to_le16(service_data); |
| |
| return bt_hci_cmd_send_sync(BT_HCI_OP_LE_PER_ADV_SYNC_TRANSFER, buf, |
| NULL); |
| } |
| #endif /* CONFIG_BT_PER_ADV_SYNC_TRANSFER_SENDER */ |
| |
| #if defined(CONFIG_BT_PER_ADV_SYNC_TRANSFER_RECEIVER) |
| static bool valid_past_param( |
| const struct bt_le_per_adv_sync_transfer_param *param) |
| { |
| if (param->skip > 0x01f3 || |
| param->timeout < 0x000A || |
| param->timeout > 0x4000) { |
| return false; |
| } |
| if ((param->options & BT_LE_PER_ADV_SYNC_TRANSFER_OPT_REPORTING_INITIALLY_DISABLED) && |
| (param->options & BT_LE_PER_ADV_SYNC_TRANSFER_OPT_FILTER_DUPLICATES)) { |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int past_param_set(const struct bt_conn *conn, uint8_t mode, |
| uint16_t skip, uint16_t timeout, uint8_t cte_type) |
| { |
| struct bt_hci_cp_le_past_param *cp; |
| struct net_buf *buf; |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_PAST_PARAM, sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| (void)memset(cp, 0, sizeof(*cp)); |
| |
| cp->conn_handle = sys_cpu_to_le16(conn->handle); |
| cp->mode = mode; |
| cp->skip = sys_cpu_to_le16(skip); |
| cp->timeout = sys_cpu_to_le16(timeout); |
| cp->cte_type = cte_type; |
| |
| return bt_hci_cmd_send_sync(BT_HCI_OP_LE_PAST_PARAM, buf, NULL); |
| } |
| |
| static int default_past_param_set(uint8_t mode, uint16_t skip, uint16_t timeout, |
| uint8_t cte_type) |
| { |
| struct bt_hci_cp_le_default_past_param *cp; |
| struct net_buf *buf; |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_DEFAULT_PAST_PARAM, sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| (void)memset(cp, 0, sizeof(*cp)); |
| |
| cp->mode = mode; |
| cp->skip = sys_cpu_to_le16(skip); |
| cp->timeout = sys_cpu_to_le16(timeout); |
| cp->cte_type = cte_type; |
| |
| return bt_hci_cmd_send_sync(BT_HCI_OP_LE_DEFAULT_PAST_PARAM, buf, NULL); |
| } |
| |
| int bt_le_per_adv_sync_transfer_subscribe( |
| const struct bt_conn *conn, |
| const struct bt_le_per_adv_sync_transfer_param *param) |
| { |
| uint8_t cte_type = 0; |
| uint8_t mode = BT_HCI_LE_PAST_MODE_SYNC; |
| int err; |
| |
| if (!BT_FEAT_LE_EXT_PER_ADV(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } else if (!BT_FEAT_LE_PAST_RECV(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } |
| |
| if (!valid_past_param(param)) { |
| return -EINVAL; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOA) { |
| cte_type |= BT_HCI_LE_PAST_CTE_TYPE_NO_AOA; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOD_1US) { |
| cte_type |= BT_HCI_LE_PAST_CTE_TYPE_NO_AOD_1US; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_NO_AOD_2US) { |
| cte_type |= BT_HCI_LE_PAST_CTE_TYPE_NO_AOD_2US; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_TRANSFER_OPT_SYNC_ONLY_CTE) { |
| cte_type |= BT_HCI_LE_PAST_CTE_TYPE_ONLY_CTE; |
| } |
| |
| if (param->options & BT_LE_PER_ADV_SYNC_TRANSFER_OPT_REPORTING_INITIALLY_DISABLED) { |
| mode = BT_HCI_LE_PAST_MODE_NO_REPORTS; |
| } else if (param->options & BT_LE_PER_ADV_SYNC_TRANSFER_OPT_FILTER_DUPLICATES) { |
| mode = BT_HCI_LE_PAST_MODE_SYNC_FILTER_DUPLICATES; |
| } |
| |
| if (conn) { |
| const uint8_t conn_idx = bt_conn_index(conn); |
| const uint8_t old_mode = conn_past_modes[conn_idx]; |
| |
| conn_past_modes[conn_idx] = mode; |
| |
| err = past_param_set(conn, mode, param->skip, param->timeout, cte_type); |
| if (err != 0) { |
| /* Restore old mode */ |
| conn_past_modes[conn_idx] = old_mode; |
| } |
| } else { |
| const uint8_t old_mode = default_past_mode; |
| |
| default_past_mode = mode; |
| |
| err = default_past_param_set(mode, param->skip, param->timeout, cte_type); |
| if (err != 0) { |
| /* Restore old mode */ |
| default_past_mode = old_mode; |
| } |
| } |
| |
| return err; |
| } |
| |
| int bt_le_per_adv_sync_transfer_unsubscribe(const struct bt_conn *conn) |
| { |
| int err; |
| |
| if (!BT_FEAT_LE_EXT_PER_ADV(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } else if (!BT_FEAT_LE_PAST_RECV(bt_dev.le.features)) { |
| return -ENOTSUP; |
| } |
| |
| if (conn) { |
| const uint8_t conn_idx = bt_conn_index(conn); |
| const uint8_t old_mode = conn_past_modes[conn_idx]; |
| |
| conn_past_modes[conn_idx] = BT_HCI_LE_PAST_MODE_NO_SYNC; |
| |
| err = past_param_set(conn, BT_HCI_LE_PAST_MODE_NO_SYNC, 0, 0x0a, 0); |
| if (err != 0) { |
| /* Restore old mode */ |
| conn_past_modes[conn_idx] = old_mode; |
| } |
| } else { |
| const uint8_t old_mode = default_past_mode; |
| |
| default_past_mode = BT_HCI_LE_PAST_MODE_NO_SYNC; |
| err = default_past_param_set(BT_HCI_LE_PAST_MODE_NO_SYNC, 0, 0x0a, 0); |
| if (err != 0) { |
| /* Restore old mode */ |
| default_past_mode = old_mode; |
| } |
| } |
| |
| return err; |
| } |
| #endif /* CONFIG_BT_PER_ADV_SYNC_TRANSFER_RECEIVER */ |
| |
| int bt_le_per_adv_list_add(const bt_addr_le_t *addr, uint8_t sid) |
| { |
| struct bt_hci_cp_le_add_dev_to_per_adv_list *cp; |
| struct net_buf *buf; |
| int err; |
| |
| if (!atomic_test_bit(bt_dev.flags, BT_DEV_READY)) { |
| return -EAGAIN; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_ADD_DEV_TO_PER_ADV_LIST, |
| sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| bt_addr_le_copy(&cp->addr, addr); |
| cp->sid = sid; |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_ADD_DEV_TO_PER_ADV_LIST, buf, |
| NULL); |
| if (err) { |
| LOG_ERR("Failed to add device to periodic advertiser list"); |
| |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| int bt_le_per_adv_list_remove(const bt_addr_le_t *addr, uint8_t sid) |
| { |
| struct bt_hci_cp_le_rem_dev_from_per_adv_list *cp; |
| struct net_buf *buf; |
| int err; |
| |
| if (!atomic_test_bit(bt_dev.flags, BT_DEV_READY)) { |
| return -EAGAIN; |
| } |
| |
| buf = bt_hci_cmd_create(BT_HCI_OP_LE_REM_DEV_FROM_PER_ADV_LIST, |
| sizeof(*cp)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| cp = net_buf_add(buf, sizeof(*cp)); |
| bt_addr_le_copy(&cp->addr, addr); |
| cp->sid = sid; |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_REM_DEV_FROM_PER_ADV_LIST, buf, |
| NULL); |
| if (err) { |
| LOG_ERR("Failed to remove device from periodic advertiser list"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| int bt_le_per_adv_list_clear(void) |
| { |
| int err; |
| |
| if (!atomic_test_bit(bt_dev.flags, BT_DEV_READY)) { |
| return -EAGAIN; |
| } |
| |
| err = bt_hci_cmd_send_sync(BT_HCI_OP_LE_CLEAR_PER_ADV_LIST, NULL, NULL); |
| if (err) { |
| LOG_ERR("Failed to clear periodic advertiser list"); |
| return err; |
| } |
| |
| return 0; |
| } |
| #endif /* defined(CONFIG_BT_PER_ADV_SYNC) */ |
| |
| bool bt_le_explicit_scanner_running(void) |
| { |
| return atomic_test_bit(scan_state.scan_flags, BT_LE_SCAN_USER_EXPLICIT_SCAN); |
| } |