| /* |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Copyright (c) 2020 Linumiz |
| * Author: Parthiban Nallathambi <parthiban@linumiz.com> |
| * |
| */ |
| |
| /dts-v1/; |
| |
| #include <infineon/xmc4500_F100x1024.dtsi> |
| #include <infineon/xmc4500_F100x1024-intc.dtsi> |
| #include "xmc45_relax_kit-pinctrl.dtsi" |
| |
| / { |
| model = "Infineon XMC4500 Relax Kit"; |
| compatible = "infineon,xm4500-relax-kit", "infineon,xmc4500", |
| "infineon,xmc4xxx"; |
| |
| aliases { |
| led0 = &led1; |
| die-temp0 = &die_temp; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| /* leds are labelled LED1 and LED2 in the relax kit documentation */ |
| led1: led1 { |
| gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| }; |
| led2: led2 { |
| gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| chosen { |
| zephyr,sram = &dsram1; |
| zephyr,flash = &flash0; |
| zephyr,console = &usic1ch1; |
| zephyr,shell-uart = &usic1ch1; |
| zephyr,flash-controller = &flash_controller; |
| zephyr,code-partition = &code_partition; |
| }; |
| }; |
| |
| &flash_controller { |
| status = "okay"; |
| }; |
| |
| &flash0 { |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| code_partition: partition@0 { |
| reg = <0x0 0x80000>; |
| read-only; |
| }; |
| |
| storage_partition: partition@80000 { |
| label = "storage"; |
| reg = <0x80000 0x80000>; |
| }; |
| }; |
| }; |
| |
| &cpu0 { |
| clock-frequency = <120000000>; |
| }; |
| |
| &usic1ch1 { |
| compatible = "infineon,xmc4xxx-uart"; |
| current-speed = <115200>; |
| pinctrl-0 = <&uart_tx_p0_1_u1c1 &uart_rx_p0_0_u1c1>; |
| pinctrl-names = "default"; |
| input-src = "DX0D"; |
| interrupts = <90 1 91 1>; |
| interrupt-names = "tx", "rx"; |
| fifo-start-offset = <0>; |
| fifo-tx-size = <16>; |
| fifo-rx-size = <16>; |
| status = "okay"; |
| }; |
| |
| &adc0 { |
| vref-internal-mv = <3300>; |
| }; |
| |
| &adc1 { |
| vref-internal-mv = <3300>; |
| }; |
| |
| &adc2 { |
| vref-internal-mv = <3300>; |
| }; |
| |
| &adc3 { |
| vref-internal-mv = <3300>; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |