| # This is an ST NUCLEO-L011K4 board with single STM32L011K4 chip. |
| # http://www.st.com/en/evaluation-tools/nucleo-l011k4.html |
| source [find interface/stlink.cfg] |
| |
| transport select hla_swd |
| |
| #set WORKAREASIZE 0x2000 |
| |
| source [find target/stm32l0.cfg] |
| |
| # There is only system reset line and JTAG/SWD command can be issued when SRST |
| reset_config srst_only |
| |
| $_TARGETNAME configure -event gdb-attach { |
| echo "Debugger attaching: halting execution" |
| reset halt |
| gdb_breakpoint_override hard |
| } |
| |
| $_TARGETNAME configure -event gdb-detach { |
| echo "Debugger detaching: resuming execution" |
| resume |
| } |