| # Copyright (c) 2020 DENX Software Engineering GmbH |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| description: | |
| DSA Device |
| |
| include: [spi-device.yaml] |
| properties: |
| dsa-master-port: |
| type: phandle |
| description: Phandle to master port. |
| dsa-slave-ports: |
| type: int |
| description: Number of slave ports on the switch |
| spi-cpha: |
| type: boolean |
| description: | |
| Set to indicate phase starts with asserted half-phase (CPHA=1). |
| For this driver using this property requires also using cpol. |
| spi-cpol: |
| type: boolean |
| description: | |
| Set to indicate clock leading edge is falling (CPOL=1). |
| For this driver using this property requires also using cpha. |
| reset-gpios: |
| type: phandle-array |
| description: | |
| The pin is asserted for 10ms during boot to reset the KSZ8794. |
| |
| child-binding: |
| description: Properties of slave port |
| properties: |
| local-mac-address: |
| type: uint8-array |
| description: | |
| Specifies the MAC address that was assigned to the port |
