blob: 240688261699c35669d2dbfd8bea8fde0fdf072e [file] [log] [blame]
# Bluetooth Controller configuration options
# Copyright (c) 2016-2017 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0
# The following symbols are enabled depending if the controller actually
# supports the respective features.
config BT_CTLR_LE_ENC_SUPPORT
bool
config BT_CTLR_CONN_PARAM_REQ_SUPPORT
bool
config BT_CTLR_EXT_REJ_IND_SUPPORT
bool
config BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT
bool
config BT_CTLR_DATA_LEN_UPDATE_SUPPORT
bool
config BT_CTLR_PRIVACY_SUPPORT
bool
config BT_CTLR_EXT_SCAN_FP_SUPPORT
bool
config BT_CTLR_PHY_UPDATE_SUPPORT
bool
config BT_CTLR_PHY_2M_SUPPORT
bool
config BT_CTLR_PHY_CODED_SUPPORT
bool
config BT_CTLR_ADV_EXT_SUPPORT
bool
config BT_CTLR_ADV_PERIODIC_SUPPORT
depends on BT_CTLR_ADV_EXT_SUPPORT
bool
config BT_CTLR_ADV_PERIODIC_RSP_SUPPORT
depends on BT_CTLR_ADV_PERIODIC_SUPPORT
bool
config BT_CTLR_SYNC_PERIODIC_SUPPORT
depends on BT_CTLR_ADV_EXT_SUPPORT
bool
config BT_CTLR_SYNC_PERIODIC_RSP_SUPPORT
depends on BT_CTLR_SYNC_PERIODIC_SUPPORT
bool
config BT_CTLR_SYNC_TRANSFER_SENDER_SUPPORT
depends on BT_CTLR_SYNC_PERIODIC_SUPPORT || BT_CTLR_ADV_PERIODIC_SUPPORT
bool
config BT_CTLR_SYNC_TRANSFER_RECEIVER_SUPPORT
depends on BT_CTLR_SYNC_PERIODIC_SUPPORT
bool
config BT_CTLR_ADV_ISO_SUPPORT
depends on BT_CTLR_ADV_PERIODIC_SUPPORT
bool
config BT_CTLR_SYNC_ISO_SUPPORT
depends on BT_CTLR_SYNC_PERIODIC_SUPPORT
bool
config BT_CTLR_CENTRAL_ISO_SUPPORT
bool
config BT_CTLR_PERIPHERAL_ISO_SUPPORT
bool
config BT_CTLR_CHAN_SEL_2_SUPPORT
bool
config BT_CTLR_MIN_USED_CHAN_SUPPORT
bool
config BT_CTLR_SMI_SUPPORT
bool
config BT_CTLR_SCA_UPDATE_SUPPORT
bool
config BT_CTLR_CONN_RSSI_SUPPORT
bool
config BT_CTLR_ECDH_SUPPORT
bool
config BT_CTLR_READ_ISO_LINK_QUALITY_SUPPORT
depends on BT_CTLR_SYNC_ISO_SUPPORT || \
BT_CTLR_CENTRAL_ISO_SUPPORT || \
BT_CTLR_PERIPHERAL_ISO_SUPPORT
bool
config BT_CTLR
bool "Bluetooth Controller"
help
Enables support for SoC native controller implementations.
if BT_CTLR
choice BT_LL_CHOICE
prompt "Bluetooth Link Layer Selection"
help
Select the Bluetooth Link Layer to compile.
config BT_LL_SW_SPLIT
bool "Software-based BLE Link Layer"
select ENTROPY_GENERATOR
help
Use Zephyr software BLE Link Layer ULL LLL split implementation.
endchoice
comment "BLE Controller configuration"
config BT_CTLR_CRYPTO
bool "Crypto functions in Controller"
default y
select ENTROPY_GENERATOR
help
Use random number generation and AES encryption support functions
provided by the controller.
config BT_CTLR_HCI_VS_BUILD_INFO
string "Zephyr HCI VS Build Info string"
default ""
depends on BT_HCI_VS_EXT
help
User-defined string that will be returned by the Zephyr VS Read Build
Information command after the Zephyr version and build time. When
setting this to a value different from an empty string, a space
character is required at the beginning to separate it from the
already included information.
config BT_CTLR_AD_DATA_BACKUP
bool "Legacy AD Data backup"
depends on BT_PERIPHERAL || BT_CTLR_ADV_EXT
default y
help
Backup Legacy Advertising Data when switching to Legacy Directed or
to Extended Advertising mode, and restore it when switching back to
Legacy Non-Directed Advertising mode.
Application can disable this feature if not using Directed
Advertising or switch between Legacy and Extended Advertising.
config BT_CTLR_HCI_ADV_HANDLE_MAPPING
bool "Advertising set handle mapping between HCI and LL"
depends on BT_CTLR_ADV_EXT
default y if BT_HCI_RAW
help
Enable mapping of advertising set handles between HCI and LL when
using external host since it can use arbitrary numbers as set handles
(as defined by Core specification) as opposed to LL which always uses
zero-based numbering. When using with Zephyr host this option can be
disabled to remove extra mapping logic.
config BT_CTLR_DUP_FILTER_LEN
int "Number of addresses in the scan duplicate filter"
depends on BT_OBSERVER
default 16
help
Set the number of unique BLE addresses that can be filtered as
duplicates while scanning.
config BT_CTLR_DUP_FILTER_ADV_SET_MAX
int "Number of Extended Advertising Sets in the scan duplicate filter"
depends on BT_OBSERVER && BT_CTLR_ADV_EXT && (BT_CTLR_DUP_FILTER_LEN > 0)
range 1 16
default 1
help
Set the number of unique Advertising Set ID per Bluetooth Low Energy
addresses that can be filtered as duplicates while Extended Scanning.
config BT_CTLR_MESH_SCAN_FILTERS
int "Number of Mesh scan filters"
depends on BT_HCI_MESH_EXT
default 1
range 1 15
help
Set the number of unique Mesh Scan Filters available as part of
the Intel Mesh Vendor Specific Extensions.
config BT_CTLR_MESH_SF_PATTERNS
int "Number of Mesh scan filter patterns"
depends on BT_HCI_MESH_EXT
default 15
range 1 15
help
Set the number of unique Mesh Scan Filter patterns available per
Scan Filter as part of the Intel Mesh Vendor Specific Extensions.
config BT_CTLR_RX_BUFFERS
int "Number of Rx buffers"
default 6 if BT_HCI_RAW
default 1
range 1 18
help
Set the number of Rx PDUs to be buffered in the controller. In a 7.5ms
connection interval and 2M PHY, maximum 18 packets with L2CAP payload
size of 1 byte can be received.
config BT_CTLR_ISO_RX_BUFFERS
int "Number of Isochronous Rx buffers"
depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
default 8
range 1 30
help
Set the number of Isochronous Rx PDUs to be buffered in the
controller. Number of required RX buffers would worst-case be
the number of RX nodes prepared in one ISO event for each
active ISO group. This depends on the number of bursts in an
ISO group and number of groups, and may need to be set lower
that the theoretical maximum. Default of 8 is for supporting
two groups of 4 payloads, e.g. 2 CIGs with 2 CISes of BN=2.
config BT_CTLR_ISO_TX_BUFFERS
int "Number of Isochronous Tx buffers"
depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
range 1 255
default BT_ISO_TX_BUF_COUNT if BT_ISO
default 3
help
Set the number of Isochronous Tx PDUs to be queued for transmission
in the controller.
config BT_CTLR_ISO_TX_BUFFER_SIZE
int "Isochronous Tx buffer size"
depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
range 1 4095
default 1
help
Size of the Isochronous Tx buffers and the value returned in HCI LE
Read Buffer Size V2 command response.
config BT_CTLR_ISOAL_SOURCES
int "Number of Isochronous Adaptation Layer sources"
depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
range 1 64
default 1
help
Set the number of concurrently active sources supported by the
ISO AL.
config BT_CTLR_ISOAL_SINKS
int "Number of Isochronous Adaptation Layer sinks"
depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
range 1 64
default 1
help
Set the number of concurrently active sinks supported by the
ISO AL.
config BT_CTLR_ISO_RX_SDU_BUFFERS
int "Number of SDU fragments that the ISO-AL can buffer"
depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
default 0
range 0 64
help
Set the number of Isochronous Rx SDU fragments to be buffered in the
ISO-AL per sink. Buffering is required to compute the size and status
of the received SDU across all the fragments before each is released.
The number of buffers and maximum SDU fragment size will limit the
maximum size of an SDU that can be accurately declared in the HCI ISO
Data header.
config BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN
int "Minimum number of playload data bytes in a new segment"
depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO
default 1
range 1 64
help
Minimum number of payload bytes that would make inserting a new
segment into a PDU worthwhile.
config BT_CTLR_ISO_VENDOR_DATA_PATH
bool "Vendor-specific ISO data path"
depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
select BT_CTLR_HCI_CODEC_AND_DELAY_INFO
choice BT_CTLR_TX_PWR
prompt "Tx Power"
default BT_CTLR_TX_PWR_0
depends on BT_CTLR_TX_PWR_ANTENNA = 0 || BT_LL_SW_SPLIT
help
Select a supported BLE Radio transmit power level in dBm.
Only values supported natively by the SoC are available.
The value set here represents the actual default power level fed
to the antenna.
config BT_CTLR_TX_PWR_PLUS_8
bool "+8 dBm"
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
config BT_CTLR_TX_PWR_PLUS_7
bool "+7 dBm"
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
config BT_CTLR_TX_PWR_PLUS_6
bool "+6 dBm"
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
config BT_CTLR_TX_PWR_PLUS_5
bool "+5 dBm"
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
config BT_CTLR_TX_PWR_PLUS_4
bool "+4 dBm"
depends on SOC_SERIES_NRF51X || SOC_COMPATIBLE_NRF52X
config BT_CTLR_TX_PWR_PLUS_3
bool "+3 dBm"
depends on SOC_COMPATIBLE_NRF52X || SOC_SERIES_NRF53X
config BT_CTLR_TX_PWR_PLUS_2
bool "+2 dBm"
depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH
config BT_CTLR_TX_PWR_0
bool "0 dBm"
config BT_CTLR_TX_PWR_MINUS_4
bool "-4 dBm"
config BT_CTLR_TX_PWR_MINUS_8
bool "-8 dBm"
config BT_CTLR_TX_PWR_MINUS_12
bool "-12 dBm"
config BT_CTLR_TX_PWR_MINUS_16
bool "-16 dBm"
config BT_CTLR_TX_PWR_MINUS_20
bool "-20 dBm"
config BT_CTLR_TX_PWR_MINUS_30
bool "-30 dBm"
depends on SOC_SERIES_NRF51X
config BT_CTLR_TX_PWR_MINUS_40
bool "-40 dBm"
depends on SOC_COMPATIBLE_NRF52X || SOC_SERIES_NRF53X
endchoice
config BT_CTLR_TX_PWR_DBM
int
default 8 if BT_CTLR_TX_PWR_PLUS_8
default 7 if BT_CTLR_TX_PWR_PLUS_7
default 6 if BT_CTLR_TX_PWR_PLUS_6
default 5 if BT_CTLR_TX_PWR_PLUS_5
default 4 if BT_CTLR_TX_PWR_PLUS_4
default 3 if BT_CTLR_TX_PWR_PLUS_3
default 2 if BT_CTLR_TX_PWR_PLUS_2
default 0 if BT_CTLR_TX_PWR_0
default -4 if BT_CTLR_TX_PWR_MINUS_4
default -8 if BT_CTLR_TX_PWR_MINUS_8
default -12 if BT_CTLR_TX_PWR_MINUS_12
default -16 if BT_CTLR_TX_PWR_MINUS_16
default -20 if BT_CTLR_TX_PWR_MINUS_20
default -30 if BT_CTLR_TX_PWR_MINUS_30
default -40 if BT_CTLR_TX_PWR_MINUS_40
config BT_CTLR_TX_PWR_ANTENNA
int "Set TX power (dBm)"
range -127 127
default 0
depends on !BT_LL_SW_SPLIT
help
Request a TX power in dBm. The power level set will be equal to or
less than the one requested, based on the values supported by the
hardware used. Values outside the supported range will be set to the
nearest supported value.
The value set here represents the actual power level fed to the
antenna. When a Front-End Module is used, gain values for the SoC and
FEM are calculated automatically to guarantee the closest possible
match to the value requested by the user at the RF output.
config BT_CTLR_TX_PWR_DYNAMIC_CONTROL
bool "Tx Power Dynamic Control"
depends on BT_HCI_VS_EXT
help
Enable dynamic control of Tx power per role/connection.
Provides HCI VS commands to set and get the current Tx
power on an individual role/connection basis.
comment "BLE Controller features"
if BT_CONN
config BT_CTLR_LE_ENC
bool "LE Encryption"
depends on BT_CTLR_LE_ENC_SUPPORT
default y
help
Enable support for Bluetooth v4.0 LE Encryption feature in the
Controller.
config BT_CTLR_ECDH
bool "Elliptic Curve Diffie-Hellman (ECDH)"
depends on BT_CTLR_ECDH_SUPPORT
default y
help
Enable support for Bluetooth v4.2 Elliptic Curve Diffie-Hellman
feature in the controller.
config BT_CTLR_CONN_PARAM_REQ
bool "Connection Parameter Request"
depends on BT_CTLR_CONN_PARAM_REQ_SUPPORT
select BT_CTLR_EXT_REJ_IND
default y
help
Enable support for Bluetooth v4.1 Connection Parameter Request feature
in the Controller.
config BT_CTLR_EXT_REJ_IND
bool "Extended Reject Indication"
depends on BT_CTLR_EXT_REJ_IND_SUPPORT
default y
help
Enable support for Bluetooth v4.1 Extended Reject Indication feature
in the Controller.
config BT_CTLR_PER_INIT_FEAT_XCHG
bool "Peripheral-initiated Features Exchange"
depends on BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT
default y
help
Enable support for Bluetooth v4.1 Peripheral-initiated Features Exchange
feature in the Controller.
config BT_CTLR_LE_PING
bool "LE Ping"
depends on BT_CTLR_LE_ENC
default y
help
Enable support for Bluetooth v4.1 LE Ping feature in the Controller.
config BT_CTLR_DATA_LENGTH
# Hidden option to enable support for Bluetooth v4.2 LE Data Length
# Update procedure in the Controller.
bool
depends on BT_DATA_LEN_UPDATE && BT_CTLR_DATA_LEN_UPDATE_SUPPORT
default y
config BT_CTLR_DATA_LENGTH_MAX
int "Maximum data length supported"
depends on BT_CTLR_DATA_LENGTH
default 27
range 27 BT_BUF_ACL_RX_SIZE if BT_BUF_ACL_RX_SIZE < 251
range 27 251
help
Set the maximum data length of PDU supported in the Controller.
config BT_CTLR_PHY
# Hidden option to enable support for Bluetooth 5.0 PHY Update
# Procedure in the Controller.
bool
depends on BT_PHY_UPDATE && BT_CTLR_PHY_UPDATE_SUPPORT
select BT_CTLR_EXT_REJ_IND
default y
config BT_CTLR_MIN_USED_CHAN
bool "Minimum Number of Used Channels"
depends on BT_CTLR_MIN_USED_CHAN_SUPPORT
default y
help
Enable support for Bluetooth 5.0 Minimum Number of Used Channels
Procedure in the Controller.
config BT_CTLR_SCA_UPDATE
bool "Sleep Clock Accuracy Update procedure"
depends on BT_SCA_UPDATE && BT_CTLR_SCA_UPDATE_SUPPORT
default y if BT_CTLR_CONN_ISO
help
Enable support for Bluetooth 5.1 Sleep Clock Accuracy
Update procedure in the Controller.
config BT_CTLR_CONN_RSSI
bool "Connection RSSI"
depends on BT_CTLR_CONN_RSSI_SUPPORT
default y if BT_HCI_RAW
help
Enable connection RSSI measurement.
config BT_CTLR_CHECK_SAME_PEER_CONN
bool
default BT_MAX_CONN > 1 && !BT_CTLR_ALLOW_SAME_PEER_CONN
endif # BT_CONN
config BT_CTLR_FILTER_ACCEPT_LIST
bool "Filter Accept List Support"
default y if BT_HCI_RAW || BT_FILTER_ACCEPT_LIST
help
Enable support for controller Filter Accept List feature
config BT_CTLR_PRIVACY
bool "LE Controller-based Privacy"
depends on BT_CTLR_PRIVACY_SUPPORT
select BT_CTLR_FILTER_ACCEPT_LIST if BT_LL_SW_SPLIT
select BT_RPA
default y if BT_HCI_RAW || BT_SMP
help
Enable support for Bluetooth v4.2 LE Controller-based Privacy feature
in the Controller.
config BT_CTLR_FAL_SIZE
int "LE Controller-based Privacy White List size"
depends on BT_CTLR_FILTER_ACCEPT_LIST
default 8
range 1 8 if (SOC_COMPATIBLE_NRF || SOC_OPENISA_RV32M1_RISCV32)
range 1 16 if !(SOC_COMPATIBLE_NRF || SOC_OPENISA_RV32M1_RISCV32)
help
Set the size of the Filter Accept List for LE Controller-based Privacy.
On nRF5x-based controllers, the hardware imposes a limit of 8 devices.
On OpenISA-based controllers, the hardware imposes a limit of 8 devices.
config BT_CTLR_RL_SIZE
int "LE Controller-based Privacy Resolving List size"
depends on BT_CTLR_PRIVACY
default 8
range 1 8 if SOC_COMPATIBLE_NRF
range 1 8 if SOC_OPENISA_RV32M1_RISCV32
help
Set the size of the Resolving List for LE Controller-based Privacy.
On nRF5x-based controllers, the hardware imposes a limit of 8 devices.
On OpenISA-based controllers, the hardware imposes a limit of 8 devices.
config BT_CTLR_EXT_SCAN_FP
bool "LE Extended Scanner Filter Policies"
depends on BT_OBSERVER && BT_CTLR_EXT_SCAN_FP_SUPPORT
default y
help
Enable support for Bluetooth v4.2 LE Extended Scanner Filter Policies
in the Controller.
config BT_CTLR_PHY_2M
bool "2Mbps PHY Support"
depends on (BT_CTLR_PHY || BT_CTLR_ADV_EXT) && BT_CTLR_PHY_2M_SUPPORT
default y
help
Enable support for Bluetooth 5.0 2Mbps PHY in the Controller.
config BT_CTLR_PHY_CODED
bool "Coded PHY Support"
depends on (BT_CTLR_PHY || BT_CTLR_ADV_EXT) && BT_CTLR_PHY_CODED_SUPPORT
default y if BT_HCI_RAW
help
Enable support for Bluetooth 5.0 Coded PHY in the Controller.
config BT_CTLR_CHAN_SEL_2
bool "Channel Selection Algorithm #2"
depends on (BT_CONN || (BT_BROADCASTER && BT_CTLR_ADV_EXT) || BT_CTLR_ADV_PERIODIC || BT_CTLR_SYNC_PERIODIC) && BT_CTLR_CHAN_SEL_2_SUPPORT
default y
help
Enable support for Bluetooth 5.0 LE Channel Selection Algorithm #2 in
the Controller.
config BT_CTLR_ADV_EXT
bool "LE Advertising Extensions"
depends on BT_CTLR_ADV_EXT_SUPPORT
select BT_CTLR_CHAN_SEL_2 if BT_LL_SW_SPLIT && BT_BROADCASTER
select BT_CTLR_SCAN_REQ_NOTIFY if BT_LL_SW_SPLIT && BT_BROADCASTER
default y if BT_EXT_ADV
help
Enable support for Bluetooth 5.0 LE Advertising Extensions in the
Controller.
if BT_CTLR_ADV_EXT
config BT_CTLR_ADV_SET
int "LE Advertising Extensions Sets"
depends on BT_BROADCASTER
range 1 64
default BT_EXT_ADV_MAX_ADV_SET if BT_EXT_ADV
help
Maximum supported advertising sets.
config BT_CTLR_ADV_INTERVAL_MAX
hex "Primary Advertising Interval Maximum"
depends on BT_BROADCASTER
range 0x000020 0x004000 if BT_LL_SW_SPLIT
range 0x000020 0xFFFFFF
default 0x004000 if BT_LL_SW_SPLIT
default 0xFFFFFF
help
Supported Primary Advertising Interval Maximum value.
Bluetooth Core Specification v5.3 permitted range is 0x000020 to
0xFFFFFF in 0.625 ms units.
config BT_CTLR_ADV_DATA_LEN_MAX
int "Maximum Advertising Data Length"
depends on BT_BROADCASTER
range 31 191 if BT_LL_SW_SPLIT && !BT_CTLR_ADV_DATA_CHAIN
range 31 1650
help
Maximum Extended Advertising Data Length.
config BT_CTLR_ADV_EXT_RX_PDU_LEN_MAX
int "Maximum Advertising Extensions Receive PDU Length"
depends on BT_OBSERVER
range 255 255 if BT_HCI_RAW
range 31 255
default 255
help
Maximum Advertising Extensions Receive PDU Length.
config BT_CTLR_SCAN_DATA_LEN_MAX
int "Maximum Extended Scanning Data Length"
depends on BT_OBSERVER
range 31 1650
help
Maximum Extended Scanning Data Length.
config BT_CTLR_ADV_PERIODIC
bool "LE Periodic Advertising in Advertising State"
depends on BT_BROADCASTER && BT_CTLR_ADV_PERIODIC_SUPPORT
select BT_CTLR_CHAN_SEL_2
default y if BT_PER_ADV
help
Enable support for Bluetooth 5.0 LE Periodic Advertising in the
Controller.
config BT_CTLR_ADV_PERIODIC_RSP
bool "LE Periodic Advertising with Responses in Advertising State"
depends on BT_BROADCASTER && BT_CTLR_ADV_PERIODIC_RSP_SUPPORT
select BT_CTLR_CHAN_SEL_2
default y if BT_PER_ADV_RSP
help
Enable support for Bluetooth 5.4 LE Periodic Advertising with
Responses in the Controller.
if BT_CTLR_ADV_PERIODIC
config BT_CTLR_ADV_PERIODIC_ADI_SUPPORT
bool "Periodic Advertising ADI support"
default y
help
Enable support for adding AdvDataInfo in Periodic Advertising PDUs.
config BT_CTLR_ADV_PERIODIC_INTERVAL_MAX
hex "Periodic Advertising Interval Maximum"
range 0x0006 0x2000 if BT_LL_SW_SPLIT
range 0x0006 0xFFFF
default 0x2000 if BT_LL_SW_SPLIT
default 0xFFFF
help
Supported Periodic Advertising Interval Maximum value.
Bluetooth Core Specification v5.3 permitted range is 0x0006 to
0xFFFF in 1.25 ms units.
endif # BT_CTLR_ADV_PERIODIC
config BT_CTLR_SYNC_PERIODIC
bool "LE Periodic Advertising in Synchronization State"
depends on BT_OBSERVER && BT_CTLR_SYNC_PERIODIC_SUPPORT
select BT_CTLR_CHAN_SEL_2
default y if BT_PER_ADV_SYNC
help
Enable support for Bluetooth 5.0 LE Periodic Advertising in
Synchronization state in the Controller.
config BT_CTLR_SYNC_PERIODIC_RSP
bool "LE Periodic Advertising with Responses in Synchronization State"
depends on BT_OBSERVER && BT_CTLR_SYNC_PERIODIC_RSP_SUPPORT
select BT_CTLR_CHAN_SEL_2
default y if BT_PER_ADV_SYNC_RSP
help
Enable support for Bluetooth 5.4 LE Periodic Advertising with
Responses in Synchronization state in the Controller.
if BT_CTLR_SYNC_PERIODIC
config BT_CTLR_SYNC_PERIODIC_ADV_LIST
bool "LE Periodic Advertiser List support"
default y
help
Enable support for LE Periodic Advertiser List support.
config BT_CTLR_SYNC_PERIODIC_ADV_LIST_SIZE
int "LE Periodic Advertiser List size"
depends on BT_CTLR_SYNC_PERIODIC_ADV_LIST
range 1 255
default 8
help
Set Periodic Advertiser List size, this will be return in the HCI LE
Read Periodic Advertiser List Command.
config BT_CTLR_SYNC_PERIODIC_ADI_SUPPORT
bool "Periodic Advertising Sync with ADI support (duplicate filtering)"
default y
help
Enable support for duplicate filtering using AdvDataInfo present in
Periodic Advertising PDUs.
config BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
bool "LE Periodic Advertiser filtering by CTE type"
default y
help
Enable filtering of periodic advertisements depending on type of
Constant Tone Extension.
config BT_CTLR_CHECK_SAME_PEER_SYNC
# Hidden Kconfig to add same peer synchronization check
bool
default BT_PER_ADV_SYNC_MAX > 1
config BT_CTLR_SYNC_TRANSFER_RECEIVER
bool "Periodic Advertising Sync Transfer receiver"
depends on BT_CTLR_SYNC_TRANSFER_RECEIVER_SUPPORT
default BT_PER_ADV_SYNC_TRANSFER_RECEIVER
help
Enable support for the Periodic Advertising Sync Transfer control procedure
as a receiver of the LL_PERIODIC_SYNC_IND. See Core_v5.3, Vol 6, Part B,
Section 5.1.13
endif # BT_CTLR_SYNC_PERIODIC
config BT_CTLR_SYNC_TRANSFER_SENDER
bool "Periodic Advertising Sync Transfer sender"
depends on BT_CTLR_SYNC_TRANSFER_SENDER_SUPPORT
default BT_PER_ADV_SYNC_TRANSFER_SENDER
help
Enable support for the Periodic Advertising Sync Transfer control procedure
as a transmitter of the LL_PERIODIC_SYNC_IND. See Core_v5.3, Vol 6, Part B,
Section 5.1.13
config BT_CTLR_ADV_ISO
bool "LE Broadcast Isochronous Channel advertising" if !BT_LL_SW_SPLIT
depends on BT_BROADCASTER && BT_CTLR_ADV_ISO_SUPPORT
select BT_CTLR_ADV_PERIODIC
select BT_CTLR_SET_HOST_FEATURE
help
Enable support for Bluetooth 5.2 LE Isochronous Advertising in the
Controller.
config BT_CTLR_ADV_ISO
bool "LE Broadcast Isochronous Channel advertising (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
select EXPERIMENTAL if BT_LL_SW_SPLIT
config BT_CTLR_SYNC_ISO
bool "LE Broadcast Isochronous Channel advertising sync" if !BT_LL_SW_SPLIT
depends on BT_OBSERVER && BT_CTLR_SYNC_ISO_SUPPORT
select BT_CTLR_SYNC_PERIODIC
select BT_CTLR_SET_HOST_FEATURE
help
Enable support for Bluetooth 5.2 LE Isochronous Advertising sync in
the Controller.
config BT_CTLR_SYNC_ISO
bool "LE Broadcast Isochronous Channel advertising sync (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
select EXPERIMENTAL if BT_LL_SW_SPLIT
config BT_CTLR_BROADCAST_ISO
bool
select BT_CRYPTO if BT_LL_SW_SPLIT
default BT_CTLR_ADV_ISO || BT_CTLR_SYNC_ISO
config BT_CTLR_ADV_ISO_SET
int "LE Isochronous Channel advertising sets"
depends on BT_CTLR_ADV_ISO
range 1 32
help
Maximum supported advertising sets.
config BT_CTLR_ADV_ISO_STREAM_MAX
int "Maximum supported Broadcast ISO Streams per Broadcast ISO group"
depends on BT_CTLR_ADV_ISO
range 1 31
help
Maximum supported Broadcast ISO Streams per Broadcast ISO group.
config BT_CTLR_ADV_ISO_STREAM_COUNT
int "Maximum Broadcast ISO Streams"
depends on BT_CTLR_ADV_ISO
range BT_CTLR_ADV_ISO_STREAM_MAX 64
help
Maximum Broadcast ISO Streams supported in the the Controller across
all Broadcast ISO groups.
config BT_CTLR_ADV_ISO_PDU_LEN_MAX
int "Maximum Broadcast Isochronous Channel PDU Length"
depends on BT_CTLR_ADV_ISO
range 1 251
default 251
help
Maximum Broadcast Isochronous Channel PDU Length.
config BT_CTLR_SYNC_ISO_STREAM_MAX
int "Maximum supported ISO Synchronized Receiver Streams per Broadcast ISO group"
depends on BT_CTLR_SYNC_ISO
range 1 31
help
Maximum supported ISO Synchronized Receiver Streams per Broadcast ISO
group.
config BT_CTLR_SYNC_ISO_STREAM_COUNT
int "Maximum ISO Synchronized Receiver Streams"
depends on BT_CTLR_SYNC_ISO
range BT_CTLR_SYNC_ISO_STREAM_MAX 64
help
Maximum ISO Synchronized Receiver Streams supported in the the
Controller across all Broadcast ISO groups.
config BT_CTLR_SYNC_ISO_PDU_LEN_MAX
int "Maximum Synchronized Isochronous Channel PDU Length"
depends on BT_CTLR_SYNC_ISO
range 251 251 if BT_HCI_RAW
range 1 251
default 251
help
Maximum Synchronized Receiver Isochronous Channel PDU Length.
endif # BT_CTLR_ADV_EXT
config BT_CTLR_SET_HOST_FEATURE
bool "LE Set Host Feature Command [EXPERIMENTAL]"
select EXPERIMENTAL
help
Enables optional LE Set Host Feature Command
config BT_CTLR_CENTRAL_ISO
bool "LE Connected Isochronous Stream Central" if !BT_LL_SW_SPLIT
depends on BT_CTLR_CENTRAL_ISO_SUPPORT && BT_CENTRAL
help
Enable support for Bluetooth 5.2 LE Connected Isochronous Stream
Central role in the Controller.
config BT_CTLR_CENTRAL_ISO
bool "LE Connected Isochronous Stream Central (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
select BT_CTLR_SET_HOST_FEATURE
select EXPERIMENTAL if BT_LL_SW_SPLIT
config BT_CTLR_PERIPHERAL_ISO
bool "LE Connected Isochronous Stream Peripheral" if !BT_LL_SW_SPLIT
depends on BT_CTLR_PERIPHERAL_ISO_SUPPORT && BT_PERIPHERAL
help
Enable support for Bluetooth 5.2 LE Connected Isochronous Stream
Peripheral role in the Controller.
config BT_CTLR_PERIPHERAL_ISO
bool "LE Connected Isochronous Stream Peripheral (Split Link Layer) [EXPERIMENTAL]" if BT_LL_SW_SPLIT
select BT_CTLR_SET_HOST_FEATURE
select EXPERIMENTAL if BT_LL_SW_SPLIT
config BT_CTLR_CONN_ISO
bool
default BT_CTLR_CENTRAL_ISO || BT_CTLR_PERIPHERAL_ISO
config BT_CTLR_CONN_ISO_STREAMS
int "LE Connected Isochronous Streams"
depends on BT_CTLR_CONN_ISO
range 1 64
default 2
help
Maximum supported total number of CISes.
config BT_CTLR_CONN_ISO_GROUPS
int "LE Connected Isochronous Groups"
depends on BT_CTLR_CONN_ISO
range 1 240
default 1
help
Maximum supported CIGs.
config BT_CTLR_CONN_ISO_STREAMS_PER_GROUP
int "LE Connected Isochronous Streams per Group"
depends on BT_CTLR_CONN_ISO
range 1 31
default 2
help
Maximum supported CISes per CIG.
config BT_CTLR_CONN_ISO_HCI_DATAPATH_SKIP_INVALID_DATA
bool "Do not pass invalid SDUs on HCI datapath"
depends on BT_CTLR_CONN_ISO
help
This allows for applications to decide whether to
forward invalid SDUs through HCI upwards.
config BT_CTLR_CONN_ISO_PDU_LEN_MAX
int "Maximum Connected Isochronous Channel PDU Length"
depends on BT_CTLR_CONN_ISO
range 251 251 if BT_HCI_RAW
range 1 251
default 251
help
Maximum Connected Isochronous Channel PDU Length.
config BT_CTLR_CONN_ISO_SDU_LEN_MAX
int "Maximum Connected Isochronous Channel SDU Length"
depends on BT_CTLR_CONN_ISO
range BT_CTLR_CONN_ISO_PDU_LEN_MAX 4095
default 251
help
Maximum Connected Isochronous Channel SDU Length.
config BT_CTLR_CONN_ISO_STREAMS_MAX_NSE
int "LE Connected Isochronous Streams max number of subevents"
depends on BT_CTLR_CONN_ISO
range 1 31
default 31
help
Maximum number of CIS subevents.
choice
prompt "CIS Creation Policy Selection"
default BT_CTLR_CONN_ISO_RELIABILITY_POLICY
config BT_CTLR_CONN_ISO_RELIABILITY_POLICY
bool "CIS creation policy for reliability"
depends on BT_CTLR_CENTRAL_ISO
help
Select this option to use reliability policy for CIS creation. This
favors a CIS layout/configuration which utilizes the full range of the
Max_Transmission_Latency for maximum retransmission and payload
recovery.
config BT_CTLR_CONN_ISO_LOW_LATENCY_POLICY
bool "CIS creation policy for low latency"
depends on BT_CTLR_CENTRAL_ISO
help
Select this option to use low latency policy for CIS creation. This
favors a CIS layout/configuration which compacts payload transmission
for lowest possible latency.
endchoice
config BT_CTLR_ISO
bool
default BT_CTLR_BROADCAST_ISO || BT_CTLR_CONN_ISO
config BT_CTLR_READ_ISO_LINK_QUALITY
bool "LE Read ISO Link Quality"
depends on BT_CTLR_READ_ISO_LINK_QUALITY_SUPPORT
depends on BT_CTLR_SYNC_ISO || BT_CTLR_CONN_ISO
help
Enable support for LE Read ISO Link Quality command.
config BT_CTLR_SMI_RX
bool "Stable modulation index - Receiver"
depends on BT_CTLR_SMI_SUPPORT
help
Enable support for Bluetooth 5.0 SMI RX in the Controller.
config BT_CTLR_SMI_TX
bool "Stable modulation index - Transmitter"
depends on BT_CTLR_SMI_SUPPORT
help
Enable support for Bluetooth 5.0 SMI TX in the Controller.
config BT_CTLR_SMI_TX_SETTING
bool "Stable modulation index - Transmitter as setting"
depends on BT_CTLR_SMI_TX && BT_CTLR_SETTINGS
help
Enable support for Bluetooth 5.0 SMI TX through a system setting.
config BT_CTLR_HCI_CODEC_AND_DELAY_INFO
bool "Codecs and controller delay information commands"
help
Enable HCI commands to read information about supported
codecs, codec capabilities, and controller delay.
rsource "Kconfig.df"
rsource "Kconfig.ll_sw_split"
rsource "Kconfig.dtm"
config BT_CTLR_ASSERT_HANDLER
bool "Application Defined Assertion Handler"
help
This option enables an application-defined sink for the
controller assertion mechanism. This must be defined in
application code as void \"bt_ctlr_assert_handle(char \*, int)\"
and will be invoked whenever the controller code encounters
an unrecoverable error.
config BT_CTLR_TEST
bool "Run in-system unit tests"
help
Run in-system unit tests
endif # BT_CTLR
config BT_CTLR_DEBUG_PINS_CPUAPP
bool "Bluetooth Controller Debug Pins"
depends on BOARD_NRF5340DK_NRF5340_CPUAPP
help
Route debug GPIO toggling for the BLE Controller. Enable this when
using Bluetooth Controller Debug Pins in co-processor and the main
processor needs to setup and/or route the signals.