| .. _gd32e507z_eval: |
| |
| GigaDevice GD32E507Z-EVAL |
| ######################### |
| |
| Overview |
| ******** |
| |
| The GD32E507Z-EVAL board is a hardware platform that enables prototyping |
| on GD32E507ZE Cortex-M33 High Performance MCU. |
| |
| The GD32E507ZE features a single-core ARM Cortex-M33 MCU which can run up |
| to 180 MHz with flash accesses zero wait states, 512kiB of Flash, 128kiB of |
| SRAM and 112 GPIOs. |
| |
| .. image:: img/gd32e507z_eval.jpg |
| :align: center |
| :alt: gd32e507z_eval |
| |
| Hardware |
| ******** |
| |
| - GD32E507ZET6 MCU |
| - AT24C02C 2Kb EEPROM |
| - GD25Q16 16Mbit SPI and QSPI NOR Flash |
| - GD9FU1G8F2A 1Gbit NAND Flash |
| - Micron MT48LC16M16A2P-6AIT 256Mbit SDRAM |
| - 4 x User LEDs |
| - 1 x Joystick (L/R/U/D/C) |
| - 1 x USART (connected to USB VCOM at J1 connector) |
| - 1 x POT connected to an ADC input |
| - Headphone interface |
| - USB FS connector |
| - 1 x CAN (includes SN65HVD230 PHY) |
| - Ethernet Interface |
| - 3.2" RGB-LCD (320x240) |
| - GD-Link on board programmer |
| - J-Link/JTAG connector |
| |
| For more information about the GD32E507 SoC and GD32E507Z-EVAL board: |
| |
| - `GigaDevice Cortex-M33 High Performance SoC Website`_ |
| - `GD32E507X Datasheet`_ |
| - `GD32E50X User Manual`_ |
| - `GD32E507Z-EVAL User Manual`_ |
| |
| Supported Features |
| ================== |
| |
| The board configuration supports the following hardware features: |
| |
| .. list-table:: |
| :header-rows: 1 |
| |
| * - Peripheral |
| - Kconfig option |
| - Devicetree compatible |
| * - EXTI |
| - :kconfig:option:`CONFIG_GD32_EXTI` |
| - :dtcompatible:`gd,gd32-exti` |
| * - GPIO |
| - :kconfig:option:`CONFIG_GPIO` |
| - :dtcompatible:`gd,gd32-gpio` |
| * - NVIC |
| - N/A |
| - :dtcompatible:`arm,v8m-nvic` |
| * - PWM |
| - :kconfig:option:`CONFIG_PWM` |
| - :dtcompatible:`gd,gd32-pwm` |
| * - SYSTICK |
| - N/A |
| - N/A |
| * - USART |
| - :kconfig:option:`CONFIG_SERIAL` |
| - :dtcompatible:`gd,gd32-usart` |
| |
| Serial Port |
| =========== |
| |
| The GD32E507Z-EVAL board has one serial communication port. The default port |
| is USART0 with TX connected at PA9 and RX at PA10. USART0 is exposed as a |
| virtual COM port via the J1 USB connector. |
| |
| Programming and Debugging |
| ************************* |
| |
| Before programming your board make sure to configure boot jumpers as |
| follows: |
| |
| - JP3/4: Select 2-3 for both (boot from user memory) |
| |
| Using GD-Link or J-Link |
| ======================= |
| |
| The board comes with an embedded GD-Link programmer. It can be used with pyOCD |
| provided you install the necessary CMSIS-Pack: |
| |
| .. code-block:: console |
| |
| pyocd pack install gd32e507ze |
| |
| J-Link can also be used to program the board using the JTAG interface exposed in |
| the JP2 header. |
| |
| #. Build the Zephyr kernel and the :ref:`hello_world` sample application: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/hello_world |
| :board: gd32e507z_eval |
| :goals: build |
| :compact: |
| |
| #. Run your favorite terminal program to listen for output. On Linux the |
| terminal should be something like ``/dev/ttyUSB0``. For example: |
| |
| .. code-block:: console |
| |
| minicom -D /dev/ttyUSB0 -o |
| |
| The -o option tells minicom not to send the modem initialization |
| string. Connection should be configured as follows: |
| |
| - Speed: 115200 |
| - Data: 8 bits |
| - Parity: None |
| - Stop bits: 1 |
| |
| #. To flash an image: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/hello_world |
| :board: gd32e507z_eval |
| :goals: flash |
| :compact: |
| |
| You should see "Hello World! gd32e507z_eval" in your terminal. |
| |
| #. To debug an image: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/hello_world |
| :board: gd32e507z_eval |
| :goals: debug |
| :compact: |
| |
| .. _GigaDevice Cortex-M33 High Performance SoC Website: |
| https://www.gigadevice.com/products/microcontrollers/gd32/arm-cortex-m33/high-performance-line/ |
| |
| .. _GD32E507X Datasheet: |
| https://gd32mcu.com/download/down/document_id/252/path_type/1 |
| |
| .. _GD32E50X User Manual: |
| https://www.gd32mcu.com/download/down/document_id/249/path_type/1 |
| |
| .. _GD32E507Z-EVAL User Manual: |
| https://www.gd32mcu.com/data/documents/evaluationBoard/GD32E50x_Demo_Suites_V1.2.1.rar |