| # Copyright (c) 2021 Nordic Semiconductor ASA |
| # Copyright 2025 Arm Limited and/or its affiliates <open-source-office@arm.com> |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig PINCTRL |
| bool "Pin controller drivers" |
| |
| if PINCTRL |
| |
| module = PINCTRL |
| module-str = PINCTRL |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| config PINCTRL_STORE_REG |
| bool |
| help |
| This option must be selected by drivers that require access to the device |
| register address. This can happen, for example, if certain pin control |
| actions are device dependent or require access to device specific |
| registers |
| |
| config PINCTRL_NON_STATIC |
| bool |
| help |
| This option can be selected if the pin control configuration defined by |
| a driver has to be accessed externally. This can happen, for example, when |
| dynamic pin control is enabled or in testing environments. |
| |
| config PINCTRL_DYNAMIC |
| bool "Dynamic configuration of pins" |
| select PINCTRL_NON_STATIC |
| help |
| When this option is enabled pin control configuration can be changed at |
| runtime. This can be useful, for example, to change the pins assigned to a |
| peripheral at early boot stages depending on a certain input. |
| |
| config PINCTRL_KEEP_SLEEP_STATE |
| bool "Keep sleep state" |
| default y if PM || PM_DEVICE || DEVICE_DEINIT_SUPPORT |
| |
| source "drivers/pinctrl/Kconfig.b91" |
| source "drivers/pinctrl/Kconfig.bflb" |
| source "drivers/pinctrl/Kconfig.ambiq" |
| source "drivers/pinctrl/Kconfig.arm_mps2" |
| source "drivers/pinctrl/Kconfig.arm_mps3" |
| source "drivers/pinctrl/Kconfig.arm_mps4" |
| source "drivers/pinctrl/Kconfig.arm_v2m_beetle" |
| source "drivers/pinctrl/Kconfig.gd32" |
| source "drivers/pinctrl/Kconfig.it8xxx2" |
| source "drivers/pinctrl/Kconfig.npcx" |
| source "drivers/pinctrl/Kconfig.numicro" |
| source "drivers/pinctrl/Kconfig.nrf" |
| source "drivers/pinctrl/Kconfig.mchp" |
| source "drivers/pinctrl/Kconfig.mspm0" |
| source "drivers/pinctrl/Kconfig.rpi_pico" |
| source "drivers/pinctrl/Kconfig.sam" |
| source "drivers/pinctrl/Kconfig.sam0" |
| source "drivers/pinctrl/Kconfig.stm32" |
| source "drivers/pinctrl/Kconfig.nxp_port" |
| source "drivers/pinctrl/Kconfig.xec" |
| source "drivers/pinctrl/Kconfig.imx" |
| source "drivers/pinctrl/Kconfig.sifive" |
| source "drivers/pinctrl/Kconfig.lpc_iocon" |
| source "drivers/pinctrl/Kconfig.cc13xx_cc26xx" |
| source "drivers/pinctrl/Kconfig.cc23x0" |
| source "drivers/pinctrl/Kconfig.esp32" |
| source "drivers/pinctrl/Kconfig.rv32m1" |
| source "drivers/pinctrl/Kconfig.ifx_cat1" |
| source "drivers/pinctrl/Kconfig.xlnx" |
| source "drivers/pinctrl/Kconfig.xmc4xxx" |
| source "drivers/pinctrl/Kconfig.nxp_siul2" |
| source "drivers/pinctrl/Kconfig.gecko" |
| source "drivers/pinctrl/Kconfig.silabs_dbus" |
| source "drivers/pinctrl/Kconfig.siwx91x" |
| source "drivers/pinctrl/Kconfig.ti_k3" |
| source "drivers/pinctrl/Kconfig.emsdp" |
| source "drivers/pinctrl/Kconfig.ti_cc32xx" |
| source "drivers/pinctrl/Kconfig.numaker" |
| source "drivers/pinctrl/Kconfig.eos_s3" |
| source "drivers/pinctrl/Kconfig.mci_io_mux" |
| source "drivers/pinctrl/Kconfig.ene" |
| source "drivers/pinctrl/Kconfig.zynqmp" |
| source "drivers/pinctrl/Kconfig.max32" |
| source "drivers/pinctrl/Kconfig.mec5" |
| source "drivers/pinctrl/Kconfig.wch_afio" |
| source "drivers/pinctrl/Kconfig.sy1xx" |
| source "drivers/pinctrl/Kconfig.realtek_rts5912" |
| source "drivers/pinctrl/Kconfig.wch_20x_30x_afio" |
| source "drivers/pinctrl/Kconfig.wch_00x_afio" |
| source "drivers/pinctrl/Kconfig.sf32lb52x" |
| |
| rsource "renesas/Kconfig" |
| |
| endif # PINCTRL |
