| /* |
| * Copyright (c) 2019, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| |
| #include <nxp/nxp_rt1015.dtsi> |
| |
| / { |
| model = "NXP MIMXRT1015-EVK board"; |
| compatible = "nxp,mimxrt1015"; |
| |
| aliases { |
| gpio-1= &gpio1; |
| gpio-2= &gpio2; |
| gpio-3= &gpio3; |
| gpio-4= &gpio4; |
| gpio-5= &gpio5; |
| i2c-1 = &i2c1; |
| uart-1 = &uart1; |
| uart-4 = &uart4; |
| led0 = &green_led; |
| sw0 = &user_button; |
| }; |
| |
| chosen { |
| zephyr,console = &uart1; |
| zephyr,shell-uart = &uart1; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| green_led: led-1 { |
| gpios = <&gpio3 21 GPIO_INT_ACTIVE_LOW>; |
| label = "User LD1"; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| user_button: button-1 { |
| label = "User SW4"; |
| gpios = <&gpio2 9 GPIO_INT_ACTIVE_LOW>; |
| }; |
| }; |
| |
| arduino_header: connector { |
| compatible = "arduino-header-r3"; |
| #gpio-cells = <2>; |
| gpio-map-mask = <0xffffffff 0xffffffc0>; |
| gpio-map-pass-thru = <0 0x3f>; |
| gpio-map = <0 0 &gpio1 29 0>, /* A0 */ |
| <1 0 &gpio1 14 0>, /* A1 */ |
| <2 0 &gpio1 28 0>, /* A2 */ |
| <3 0 &gpio1 26 0>, /* A3 */ |
| <4 0 &gpio1 31 0>, /* A4 */ |
| <5 0 &gpio1 30 0>, /* A5 */ |
| <6 0 &gpio3 1 0>, /* D0 */ |
| <7 0 &gpio3 0 0>, /* D1 */ |
| <8 0 &gpio2 20 0>, /* D2 */ |
| <9 0 &gpio2 26 0>, /* D3 */ |
| <10 0 &gpio3 2 0>, /* D4 */ |
| <11 0 &gpio2 27 0>, /* D5 */ |
| <12 0 &gpio1 27 0>, /* D6 */ |
| <13 0 &gpio1 15 0>, /* D7 */ |
| <14 0 &gpio2 21 0>, /* D8 */ |
| <15 0 &gpio2 22 0>, /* D9 */ |
| <16 0 &gpio1 11 0>, /* D10 */ |
| <17 0 &gpio1 12 0>, /* D11 */ |
| <18 0 &gpio1 13 0>, /* D12 */ |
| <19 0 &gpio1 10 0>, /* D13 */ |
| <20 0 &gpio1 31 0>, /* D14 */ |
| <21 0 &gpio1 30 0>; /* D15 */ |
| }; |
| }; |
| |
| arduino_serial: &uart4 {}; |
| |
| &flexspi0 { |
| reg = <0x402a8000 0x4000>, <0x60000000 0x1000000>; |
| at25sf128a: at25sf128a@0 { |
| compatible = "adesto,at25sf128a", "jedec,spi-nor"; |
| size = <134217728>; |
| label = "AT25SF128A"; |
| reg = <0>; |
| spi-max-frequency = <133000000>; |
| status = "okay"; |
| jedec-id = [1f 89 01]; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| current-speed = <115200>; |
| }; |
| |
| &usbd1 { |
| status = "okay"; |
| }; |