| # Kconfig.k64 - K64 GPIO configuration options |
| # |
| # |
| # Copyright (c) 2016 Intel Corporation |
| # Copyright (c) 2016 Wind River Systems, Inc. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| menuconfig GPIO_K64 |
| bool "Freescale K64-based GPIO driver" |
| depends on GPIO && SOC_MK64F12 |
| default n |
| help |
| Enable driver for Freescale K64-based GPIOs. |
| |
| if GPIO_K64 |
| |
| config PORT_K64_INT_STATUS_OFFSET |
| hex "Freescale K64-based Port Control interrupt status register offset" |
| depends on GPIO_K64 |
| default 0xA0 |
| |
| config GPIO_K64_A |
| bool "Freescale K64-based GPIO Port A" |
| depends on GPIO_K64 |
| default n |
| help |
| Enable config options for Freescale K64-based GPIO port A. |
| |
| config GPIO_K64_A_DEV_NAME |
| string "Freescale K64-based GPIO Port A Device Name" |
| depends on GPIO_K64_A |
| default "GPIO_0" |
| help |
| Specify the device name. |
| |
| config GPIO_K64_PORTA_PRI |
| int "Freescale K64-based Port A interrupt priority" |
| depends on GPIO_K64_A |
| default 2 |
| help |
| K64 Port A IRQ priority |
| |
| config GPIO_K64_B |
| bool "Freescale K64-based GPIO Port B" |
| depends on GPIO_K64 |
| default n |
| help |
| Enable config options for Freescale K64-based GPIO port B. |
| |
| config GPIO_K64_B_DEV_NAME |
| string "Freescale K64-based GPIO Port B Device Name" |
| depends on GPIO_K64_B |
| default "GPIO_1" |
| help |
| Specify the device name. |
| |
| config GPIO_K64_PORTB_PRI |
| int "Freescale K64-based Port B interrupt priority" |
| depends on GPIO_K64_B |
| default 2 |
| help |
| K64 Port B IRQ priority |
| |
| config GPIO_K64_C |
| bool "Freescale K64-based GPIO Port B" |
| depends on GPIO_K64 |
| default n |
| help |
| Enable config options for Freescale K64-based GPIO port C. |
| |
| config GPIO_K64_C_DEV_NAME |
| string "Freescale K64-based GPIO Port B Device Name" |
| depends on GPIO_K64_C |
| default "GPIO_2" |
| help |
| Specify the device name. |
| |
| config GPIO_K64_PORTC_PRI |
| int "Freescale K64-based Port C interrupt priority" |
| depends on GPIO_K64_C |
| default 2 |
| help |
| K64 Port C IRQ priority |
| |
| config GPIO_K64_D |
| bool "Freescale K64-based GPIO Port D" |
| depends on GPIO_K64 |
| default n |
| help |
| Enable config options for Freescale K64-based GPIO port D. |
| |
| config GPIO_K64_D_DEV_NAME |
| string "Freescale K64-based GPIO Port D Device Name" |
| depends on GPIO_K64_D |
| default "GPIO_3" |
| help |
| Specify the device name. |
| |
| config GPIO_K64_PORTD_PRI |
| int "Freescale K64-based Port D interrupt priority" |
| depends on GPIO_K64_D |
| default 2 |
| help |
| K64 Port D IRQ priority |
| |
| config GPIO_K64_E |
| bool "Freescale K64-based GPIO Port E" |
| depends on GPIO_K64 |
| default n |
| help |
| Enable config options for Freescale K64-based GPIO port E. |
| |
| config GPIO_K64_E_DEV_NAME |
| string "Freescale K64-based GPIO Port E Device Name" |
| depends on GPIO_K64_E |
| default "GPIO_4" |
| help |
| Specify the device name. |
| |
| config GPIO_K64_PORTE_PRI |
| int "Freescale K64-based Port E interrupt priority" |
| depends on GPIO_K64_E |
| default 2 |
| help |
| K64 Port E IRQ priority |
| |
| endif # GPIO_K64 |
