blob: 9f74f2a96c4b703aa4addf56fe4c767c99a24501 [file] [log] [blame]
menuconfig UART_STELLARIS
bool "Stellaris serial driver"
default n
select SERIAL_HAS_DRIVER
help
This option enables the Stellaris serial driver.
This specific driver can be used for the serial hardware
available at the Texas Instrument LM3S6965 platform.
# ---------- Port 0 ----------
menuconfig UART_STELLARIS_PORT_0
bool "Enable Stellaris UART Port 0"
default n
depends on UART_STELLARIS
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_STELLARIS_PORT_0_NAME
string "Port 0 Device Name"
default "UART_0"
depends on UART_STELLARIS_PORT_0
help
This is the device name for UART, and is included in the device
struct.
config UART_STELLARIS_PORT_0_IRQ_PRI
int "Port 0 Interrupt Priority"
default 0
depends on UART_STELLARIS_PORT_0
help
The interrupt priority for UART port.
config UART_STELLARIS_PORT_0_BAUD_RATE
int "Port 0 Baud Rate"
default 0
depends on UART_STELLARIS_PORT_0
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
# ---------- Port 1 ----------
menuconfig UART_STELLARIS_PORT_1
bool "Enable Stellaris UART Port 1"
default n
depends on UART_STELLARIS
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_STELLARIS_PORT_1_NAME
string "Port 1 Device Name"
default "UART_1"
depends on UART_STELLARIS_PORT_1
help
This is the device name for UART, and is included in the device
struct.
config UART_STELLARIS_PORT_1_IRQ_PRI
int "Port 1 Interrupt Priority"
default 0
depends on UART_STELLARIS_PORT_1
help
The interrupt priority for UART port.
config UART_STELLARIS_PORT_1_BAUD_RATE
int "Port 1 Baud Rate"
default 0
depends on UART_STELLARIS_PORT_1
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
# ---------- Port 2 ----------
menuconfig UART_STELLARIS_PORT_2
bool "Enable Stellaris UART Port 2"
default n
depends on UART_STELLARIS
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_STELLARIS_PORT_2_NAME
string "Port 2 Device Name"
default "UART_2"
depends on UART_STELLARIS_PORT_2
help
This is the device name for UART, and is included in the device
struct.
config UART_STELLARIS_PORT_2_IRQ_PRI
int "Port 2 Interrupt Priority"
default 0
depends on UART_STELLARIS_PORT_2
help
The interrupt priority for UART port.
config UART_STELLARIS_PORT_2_BAUD_RATE
int "Port 2 Baud Rate"
default 0
depends on UART_STELLARIS_PORT_2
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.