| This is a sample app which displays an incrementing | |
| counter through the Grove LCD, with changing backlight. | |
| Arduino 101 | |
| =========== | |
| You will need to connect the Grove LCD via the shield | |
| onto the Arduino 101. Additionally, you will need to | |
| use 2 pull-up resistors (10k Ohm) between the SCL/SDA | |
| lines and 3.3V. The I2C lines on Quark SE Sensor | |
| Subsystem does not have internal pull-up, so external | |
| one is required. |