| /* |
| * Copyright (c) 2019 Interay Solutions B.V. |
| * Copyright (c) 2019 Oane Kingma |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT silabs_gecko_ethernet |
| |
| /* Silicon Labs EFM32 Giant Gecko 11 Ethernet driver. |
| * Limitations: |
| * - no link monitoring through PHY interrupt |
| */ |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(eth_gecko, CONFIG_ETHERNET_LOG_LEVEL); |
| |
| #include <soc.h> |
| #include <zephyr/device.h> |
| #include <zephyr/init.h> |
| #include <zephyr/kernel.h> |
| #include <errno.h> |
| #include <zephyr/net/net_pkt.h> |
| #include <zephyr/net/net_if.h> |
| #include <zephyr/net/ethernet.h> |
| #include <ethernet/eth_stats.h> |
| #include <em_cmu.h> |
| |
| #include "phy_gecko.h" |
| #include "eth_gecko_priv.h" |
| |
| #include "eth.h" |
| |
| static uint8_t dma_tx_buffer[ETH_TX_BUF_COUNT][ETH_TX_BUF_SIZE] |
| __aligned(ETH_BUF_ALIGNMENT); |
| static uint8_t dma_rx_buffer[ETH_RX_BUF_COUNT][ETH_RX_BUF_SIZE] |
| __aligned(ETH_BUF_ALIGNMENT); |
| static struct eth_buf_desc dma_tx_desc_tab[ETH_TX_BUF_COUNT] |
| __aligned(ETH_DESC_ALIGNMENT); |
| static struct eth_buf_desc dma_rx_desc_tab[ETH_RX_BUF_COUNT] |
| __aligned(ETH_DESC_ALIGNMENT); |
| static uint32_t tx_buf_idx; |
| static uint32_t rx_buf_idx; |
| |
| |
| static void link_configure(ETH_TypeDef *eth, uint32_t flags) |
| { |
| uint32_t val; |
| |
| __ASSERT_NO_MSG(eth != NULL); |
| |
| /* Disable receiver & transmitter */ |
| eth->NETWORKCTRL &= ~(ETH_NETWORKCTRL_ENBTX | ETH_NETWORKCTRL_ENBRX); |
| |
| /* Set duplex mode and speed */ |
| val = eth->NETWORKCFG; |
| val &= ~(_ETH_NETWORKCFG_FULLDUPLEX_MASK | _ETH_NETWORKCFG_SPEED_MASK); |
| val |= flags & |
| (_ETH_NETWORKCFG_FULLDUPLEX_MASK | _ETH_NETWORKCFG_SPEED_MASK); |
| eth->NETWORKCFG = val; |
| |
| /* Enable transmitter and receiver */ |
| eth->NETWORKCTRL |= (ETH_NETWORKCTRL_ENBTX | ETH_NETWORKCTRL_ENBRX); |
| } |
| |
| static void eth_gecko_setup_mac(const struct device *dev) |
| { |
| const struct eth_gecko_dev_cfg *const cfg = dev->config; |
| ETH_TypeDef *eth = cfg->regs; |
| uint32_t link_status; |
| int result; |
| |
| /* PHY auto-negotiate link parameters */ |
| result = phy_gecko_auto_negotiate(&cfg->phy, &link_status); |
| if (result < 0) { |
| LOG_ERR("ETH PHY auto-negotiate sequence failed"); |
| return; |
| } |
| |
| LOG_INF("Speed %s Mb", |
| link_status & ETH_NETWORKCFG_SPEED ? "100" : "10"); |
| LOG_INF("%s duplex", |
| link_status & ETH_NETWORKCFG_FULLDUPLEX ? "Full" : "Half"); |
| |
| /* Set up link parameters and enable receiver/transmitter */ |
| link_configure(eth, link_status); |
| } |
| |
| static void eth_init_tx_buf_desc(void) |
| { |
| uint32_t address; |
| int i; |
| |
| /* Initialize TX buffer descriptors */ |
| for (i = 0; i < ETH_TX_BUF_COUNT; i++) { |
| address = (uint32_t) dma_tx_buffer[i]; |
| dma_tx_desc_tab[i].address = address; |
| dma_tx_desc_tab[i].status = ETH_TX_USED; |
| } |
| |
| /* Mark last descriptor entry with wrap flag */ |
| dma_tx_desc_tab[i - 1].status |= ETH_TX_WRAP; |
| tx_buf_idx = 0; |
| } |
| |
| static void eth_init_rx_buf_desc(void) |
| { |
| uint32_t address; |
| int i; |
| |
| for (i = 0; i < ETH_RX_BUF_COUNT; i++) { |
| address = (uint32_t) dma_rx_buffer[i]; |
| dma_rx_desc_tab[i].address = address & ETH_RX_ADDRESS; |
| dma_rx_desc_tab[i].status = 0; |
| } |
| |
| /* Mark last descriptor entry with wrap flag */ |
| dma_rx_desc_tab[i - 1].address |= ETH_RX_WRAP; |
| rx_buf_idx = 0; |
| } |
| |
| static void rx_error_handler(ETH_TypeDef *eth) |
| { |
| __ASSERT_NO_MSG(eth != NULL); |
| |
| /* Stop reception */ |
| ETH_RX_DISABLE(eth); |
| |
| /* Reset RX buffer descriptor list */ |
| eth_init_rx_buf_desc(); |
| eth->RXQPTR = (uint32_t)dma_rx_desc_tab; |
| |
| /* Restart reception */ |
| ETH_RX_ENABLE(eth); |
| } |
| |
| static struct net_pkt *frame_get(const struct device *dev) |
| { |
| struct eth_gecko_dev_data *const dev_data = dev->data; |
| const struct eth_gecko_dev_cfg *const cfg = dev->config; |
| ETH_TypeDef *eth = cfg->regs; |
| struct net_pkt *rx_frame = NULL; |
| uint16_t frag_len, total_len; |
| uint32_t sofIdx, eofIdx; |
| uint32_t i, j; |
| |
| __ASSERT_NO_MSG(dev != NULL); |
| __ASSERT_NO_MSG(dev_data != NULL); |
| __ASSERT_NO_MSG(cfg != NULL); |
| |
| /* Preset indices and total frame length */ |
| sofIdx = UINT32_MAX; |
| eofIdx = UINT32_MAX; |
| total_len = 0; |
| |
| /* Check if a full frame is received (SOF/EOF present) |
| * and determine total length of frame |
| */ |
| for (i = 0; i < ETH_RX_BUF_COUNT; i++) { |
| j = (i + rx_buf_idx); |
| if (j >= ETH_RX_BUF_COUNT) { |
| j -= ETH_RX_BUF_COUNT; |
| } |
| |
| /* Verify it is an ETH owned buffer */ |
| if (!(dma_rx_desc_tab[j].address & ETH_RX_OWNERSHIP)) { |
| /* No more ETH owned buffers to process */ |
| break; |
| } |
| |
| /* Check for SOF */ |
| if (dma_rx_desc_tab[j].status & ETH_RX_SOF) { |
| sofIdx = j; |
| } |
| |
| if (sofIdx != UINT32_MAX) { |
| total_len += (dma_rx_desc_tab[j].status & |
| ETH_RX_LENGTH); |
| |
| /* Check for EOF */ |
| if (dma_rx_desc_tab[j].status & ETH_RX_EOF) { |
| eofIdx = j; |
| break; |
| } |
| } |
| } |
| |
| LOG_DBG("sof/eof: %u/%u, rx_buf_idx: %u, len: %u", sofIdx, eofIdx, |
| rx_buf_idx, total_len); |
| |
| /* Verify we found a full frame */ |
| if (eofIdx != UINT32_MAX) { |
| /* Allocate room for full frame */ |
| rx_frame = net_pkt_rx_alloc_with_buffer(dev_data->iface, |
| total_len, AF_UNSPEC, 0, K_NO_WAIT); |
| if (!rx_frame) { |
| LOG_ERR("Failed to obtain RX buffer"); |
| ETH_RX_DISABLE(eth); |
| eth_init_rx_buf_desc(); |
| eth->RXQPTR = (uint32_t)dma_rx_desc_tab; |
| ETH_RX_ENABLE(eth); |
| return rx_frame; |
| } |
| |
| /* Copy frame (fragments)*/ |
| j = sofIdx; |
| while (total_len) { |
| frag_len = MIN(total_len, ETH_RX_BUF_SIZE); |
| LOG_DBG("frag: %u, fraglen: %u, rx_buf_idx: %u", j, |
| frag_len, rx_buf_idx); |
| if (net_pkt_write(rx_frame, &dma_rx_buffer[j], |
| frag_len) < 0) { |
| LOG_ERR("Failed to append RX buffer"); |
| dma_rx_desc_tab[j].address &= |
| ~ETH_RX_OWNERSHIP; |
| net_pkt_unref(rx_frame); |
| rx_frame = NULL; |
| break; |
| } |
| |
| dma_rx_desc_tab[j].address &= ~ETH_RX_OWNERSHIP; |
| |
| total_len -= frag_len; |
| if (++j >= ETH_RX_BUF_COUNT) { |
| j -= ETH_RX_BUF_COUNT; |
| } |
| |
| if (++rx_buf_idx >= ETH_RX_BUF_COUNT) { |
| rx_buf_idx -= ETH_RX_BUF_COUNT; |
| } |
| } |
| } |
| |
| return rx_frame; |
| } |
| |
| static void eth_rx(const struct device *dev) |
| { |
| struct eth_gecko_dev_data *const dev_data = dev->data; |
| struct net_pkt *rx_frame; |
| int res = 0; |
| |
| __ASSERT_NO_MSG(dev != NULL); |
| __ASSERT_NO_MSG(dev_data != NULL); |
| |
| /* Iterate across (possibly multiple) frames */ |
| rx_frame = frame_get(dev); |
| while (rx_frame) { |
| /* All data for this frame received */ |
| res = net_recv_data(dev_data->iface, rx_frame); |
| if (res < 0) { |
| LOG_ERR("Failed to enqueue frame into RX queue: %d", |
| res); |
| eth_stats_update_errors_rx(dev_data->iface); |
| net_pkt_unref(rx_frame); |
| } |
| |
| /* Check if more frames are received */ |
| rx_frame = frame_get(dev); |
| } |
| } |
| |
| static int eth_tx(const struct device *dev, struct net_pkt *pkt) |
| { |
| struct eth_gecko_dev_data *const dev_data = dev->data; |
| const struct eth_gecko_dev_cfg *const cfg = dev->config; |
| ETH_TypeDef *eth = cfg->regs; |
| uint16_t total_len; |
| uint8_t *dma_buffer; |
| int res = 0; |
| |
| __ASSERT_NO_MSG(dev != NULL); |
| __ASSERT_NO_MSG(dev_data != NULL); |
| __ASSERT_NO_MSG(cfg != NULL); |
| |
| __ASSERT(pkt, "Buf pointer is NULL"); |
| __ASSERT(pkt->frags, "Frame data missing"); |
| |
| /* Determine length of frame */ |
| total_len = net_pkt_get_len(pkt); |
| if (total_len > ETH_TX_BUF_SIZE) { |
| LOG_ERR("PKT to big"); |
| res = -EIO; |
| goto error; |
| } |
| |
| if (k_sem_take(&dev_data->tx_sem, K_MSEC(100)) != 0) { |
| LOG_ERR("TX process did not complete within 100ms"); |
| res = -EIO; |
| goto error; |
| } |
| |
| /* Make sure current buffer is available for writing */ |
| if (!(dma_tx_desc_tab[tx_buf_idx].status & ETH_TX_USED)) { |
| LOG_ERR("Buffer already in use"); |
| res = -EIO; |
| goto error; |
| } |
| |
| dma_buffer = (uint8_t *)dma_tx_desc_tab[tx_buf_idx].address; |
| if (net_pkt_read(pkt, dma_buffer, total_len)) { |
| LOG_ERR("Failed to read packet into buffer"); |
| res = -EIO; |
| goto error; |
| } |
| |
| if (tx_buf_idx < (ETH_TX_BUF_COUNT - 1)) { |
| dma_tx_desc_tab[tx_buf_idx].status = |
| (total_len & ETH_TX_LENGTH) | ETH_TX_LAST; |
| tx_buf_idx++; |
| } else { |
| dma_tx_desc_tab[tx_buf_idx].status = |
| (total_len & ETH_TX_LENGTH) | (ETH_TX_LAST | |
| ETH_TX_WRAP); |
| tx_buf_idx = 0; |
| } |
| |
| /* Kick off transmission */ |
| eth->NETWORKCTRL |= ETH_NETWORKCTRL_TXSTRT; |
| |
| error: |
| return res; |
| } |
| |
| static void rx_thread(void *arg1, void *unused1, void *unused2) |
| { |
| const struct device *dev = (const struct device *)arg1; |
| struct eth_gecko_dev_data *const dev_data = dev->data; |
| const struct eth_gecko_dev_cfg *const cfg = dev->config; |
| int res; |
| |
| __ASSERT_NO_MSG(arg1 != NULL); |
| ARG_UNUSED(unused1); |
| ARG_UNUSED(unused2); |
| __ASSERT_NO_MSG(dev_data != NULL); |
| __ASSERT_NO_MSG(cfg != NULL); |
| |
| while (1) { |
| res = k_sem_take(&dev_data->rx_sem, K_MSEC( |
| CONFIG_ETH_GECKO_CARRIER_CHECK_RX_IDLE_TIMEOUT_MS)); |
| if (res == 0) { |
| if (dev_data->link_up != true) { |
| dev_data->link_up = true; |
| LOG_INF("Link up"); |
| eth_gecko_setup_mac(dev); |
| net_eth_carrier_on(dev_data->iface); |
| } |
| |
| /* Process received data */ |
| eth_rx(dev); |
| } else if (res == -EAGAIN) { |
| if (phy_gecko_is_linked(&cfg->phy)) { |
| if (dev_data->link_up != true) { |
| dev_data->link_up = true; |
| LOG_INF("Link up"); |
| eth_gecko_setup_mac(dev); |
| net_eth_carrier_on(dev_data->iface); |
| } |
| } else { |
| if (dev_data->link_up != false) { |
| dev_data->link_up = false; |
| LOG_INF("Link down"); |
| net_eth_carrier_off(dev_data->iface); |
| } |
| } |
| } |
| } |
| } |
| |
| static void eth_isr(const struct device *dev) |
| { |
| struct eth_gecko_dev_data *const dev_data = dev->data; |
| const struct eth_gecko_dev_cfg *const cfg = dev->config; |
| ETH_TypeDef *eth = cfg->regs; |
| uint32_t int_clr = 0; |
| uint32_t int_stat = eth->IFCR; |
| uint32_t tx_irq_mask = (ETH_IENS_TXCMPLT | ETH_IENS_TXUNDERRUN | |
| ETH_IENS_RTRYLMTORLATECOL | |
| ETH_IENS_TXUSEDBITREAD | |
| ETH_IENS_AMBAERR); |
| uint32_t rx_irq_mask = (ETH_IENS_RXCMPLT | ETH_IENS_RXUSEDBITREAD); |
| |
| __ASSERT_NO_MSG(dev_data != NULL); |
| __ASSERT_NO_MSG(cfg != NULL); |
| |
| /* Receive handling */ |
| if (int_stat & rx_irq_mask) { |
| if (int_stat & ETH_IENS_RXCMPLT) { |
| /* Receive complete */ |
| k_sem_give(&dev_data->rx_sem); |
| } else { |
| /* Receive error */ |
| LOG_DBG("RX Error"); |
| rx_error_handler(eth); |
| } |
| |
| int_clr |= rx_irq_mask; |
| } |
| |
| /* Transmit handling */ |
| if (int_stat & tx_irq_mask) { |
| if (int_stat & ETH_IENS_TXCMPLT) { |
| /* Transmit complete */ |
| } else { |
| /* Transmit error: no actual handling, the current |
| * buffer is no longer used and we release the |
| * semaphore which signals the user thread to |
| * start TX of a new packet |
| */ |
| } |
| |
| int_clr |= tx_irq_mask; |
| |
| /* Signal TX thread we're ready to start transmission */ |
| k_sem_give(&dev_data->tx_sem); |
| } |
| |
| /* Clear interrupts */ |
| eth->IFCR = int_clr; |
| } |
| |
| static void eth_init_clocks(const struct device *dev) |
| { |
| __ASSERT_NO_MSG(dev != NULL); |
| |
| CMU_ClockEnable(cmuClock_HFPER, true); |
| CMU_ClockEnable(cmuClock_ETH, true); |
| } |
| |
| static void eth_init_pins(const struct device *dev) |
| { |
| const struct eth_gecko_dev_cfg *const cfg = dev->config; |
| ETH_TypeDef *eth = cfg->regs; |
| uint32_t idx; |
| |
| __ASSERT_NO_MSG(dev != NULL); |
| __ASSERT_NO_MSG(cfg != NULL); |
| |
| eth->ROUTELOC1 = 0; |
| eth->ROUTEPEN = 0; |
| |
| #if DT_INST_NODE_HAS_PROP(0, location_rmii) |
| for (idx = 0; idx < ARRAY_SIZE(cfg->pin_list->rmii); idx++) |
| soc_gpio_configure(&cfg->pin_list->rmii[idx]); |
| |
| eth->ROUTELOC1 |= (DT_INST_PROP(0, location_rmii) << |
| _ETH_ROUTELOC1_RMIILOC_SHIFT); |
| eth->ROUTEPEN |= ETH_ROUTEPEN_RMIIPEN; |
| #endif |
| |
| #if DT_INST_NODE_HAS_PROP(0, location_mdio) |
| for (idx = 0; idx < ARRAY_SIZE(cfg->pin_list->mdio); idx++) |
| soc_gpio_configure(&cfg->pin_list->mdio[idx]); |
| |
| eth->ROUTELOC1 |= (DT_INST_PROP(0, location_mdio) << |
| _ETH_ROUTELOC1_MDIOLOC_SHIFT); |
| eth->ROUTEPEN |= ETH_ROUTEPEN_MDIOPEN; |
| #endif |
| |
| } |
| |
| static int eth_init(const struct device *dev) |
| { |
| const struct eth_gecko_dev_cfg *const cfg = dev->config; |
| ETH_TypeDef *eth = cfg->regs; |
| |
| __ASSERT_NO_MSG(dev != NULL); |
| __ASSERT_NO_MSG(cfg != NULL); |
| |
| /* Enable clocks */ |
| eth_init_clocks(dev); |
| |
| /* Connect pins to peripheral */ |
| eth_init_pins(dev); |
| |
| #if DT_INST_NODE_HAS_PROP(0, location_rmii) |
| /* Enable global clock and RMII operation */ |
| eth->CTRL = ETH_CTRL_GBLCLKEN | ETH_CTRL_MIISEL_RMII; |
| #endif |
| |
| /* Connect and enable IRQ */ |
| cfg->config_func(); |
| |
| LOG_INF("Device %s initialized", dev->name); |
| |
| return 0; |
| } |
| |
| static void generate_mac(uint8_t mac_addr[6]) |
| { |
| #if DT_INST_PROP(0, zephyr_random_mac_address) |
| gen_random_mac(mac_addr, SILABS_OUI_B0, SILABS_OUI_B1, SILABS_OUI_B2); |
| #elif !NODE_HAS_VALID_MAC_ADDR(DT_DRV_INST(0)) |
| mac_addr[0] = DEVINFO->EUI48H >> 8; |
| mac_addr[1] = DEVINFO->EUI48H >> 0; |
| mac_addr[2] = DEVINFO->EUI48L >> 24; |
| mac_addr[3] = DEVINFO->EUI48L >> 16; |
| mac_addr[4] = DEVINFO->EUI48L >> 8; |
| mac_addr[5] = DEVINFO->EUI48L >> 0; |
| #endif |
| } |
| |
| static void eth_iface_init(struct net_if *iface) |
| { |
| const struct device *dev = net_if_get_device(iface); |
| struct eth_gecko_dev_data *const dev_data = dev->data; |
| const struct eth_gecko_dev_cfg *const cfg = dev->config; |
| ETH_TypeDef *eth = cfg->regs; |
| int result; |
| |
| __ASSERT_NO_MSG(iface != NULL); |
| __ASSERT_NO_MSG(dev != NULL); |
| __ASSERT_NO_MSG(dev_data != NULL); |
| __ASSERT_NO_MSG(cfg != NULL); |
| |
| LOG_DBG("eth_initialize"); |
| |
| dev_data->iface = iface; |
| dev_data->link_up = false; |
| ethernet_init(iface); |
| |
| net_if_flag_set(iface, NET_IF_NO_AUTO_START); |
| |
| /* Generate MAC address, possibly used for filtering */ |
| generate_mac(dev_data->mac_addr); |
| |
| /* Set link address */ |
| LOG_DBG("MAC %02x:%02x:%02x:%02x:%02x:%02x", |
| dev_data->mac_addr[0], dev_data->mac_addr[1], |
| dev_data->mac_addr[2], dev_data->mac_addr[3], |
| dev_data->mac_addr[4], dev_data->mac_addr[5]); |
| |
| net_if_set_link_addr(iface, dev_data->mac_addr, |
| sizeof(dev_data->mac_addr), NET_LINK_ETHERNET); |
| |
| /* Disable transmit and receive circuits */ |
| eth->NETWORKCTRL = 0; |
| eth->NETWORKCFG = 0; |
| |
| /* Filtering MAC addresses */ |
| eth->SPECADDR1BOTTOM = |
| (dev_data->mac_addr[0] << 0) | |
| (dev_data->mac_addr[1] << 8) | |
| (dev_data->mac_addr[2] << 16) | |
| (dev_data->mac_addr[3] << 24); |
| eth->SPECADDR1TOP = |
| (dev_data->mac_addr[4] << 0) | |
| (dev_data->mac_addr[5] << 8); |
| |
| eth->SPECADDR2BOTTOM = 0; |
| eth->SPECADDR3BOTTOM = 0; |
| eth->SPECADDR4BOTTOM = 0; |
| |
| /* Initialise hash table */ |
| eth->HASHBOTTOM = 0; |
| eth->HASHTOP = 0; |
| |
| /* Initialise DMA buffers */ |
| eth_init_tx_buf_desc(); |
| eth_init_rx_buf_desc(); |
| |
| /* Point to locations of TX/RX DMA descriptor lists */ |
| eth->TXQPTR = (uint32_t)dma_tx_desc_tab; |
| eth->RXQPTR = (uint32_t)dma_rx_desc_tab; |
| |
| /* DMA RX size configuration */ |
| eth->DMACFG = (eth->DMACFG & ~_ETH_DMACFG_RXBUFSIZE_MASK) | |
| ((ETH_RX_BUF_SIZE / 64) << _ETH_DMACFG_RXBUFSIZE_SHIFT); |
| |
| /* Clear status/interrupt registers */ |
| eth->IFCR |= _ETH_IFCR_MASK; |
| eth->TXSTATUS = ETH_TXSTATUS_TXUNDERRUN | ETH_TXSTATUS_TXCMPLT | |
| ETH_TXSTATUS_AMBAERR | ETH_TXSTATUS_TXGO | |
| ETH_TXSTATUS_RETRYLMTEXCD | ETH_TXSTATUS_COLOCCRD | |
| ETH_TXSTATUS_USEDBITREAD; |
| eth->RXSTATUS = ETH_RXSTATUS_RESPNOTOK | ETH_RXSTATUS_RXOVERRUN | |
| ETH_RXSTATUS_FRMRX | ETH_RXSTATUS_BUFFNOTAVAIL; |
| |
| /* Enable interrupts */ |
| eth->IENS = ETH_IENS_RXCMPLT | |
| ETH_IENS_RXUSEDBITREAD | |
| ETH_IENS_TXCMPLT | |
| ETH_IENS_TXUNDERRUN | |
| ETH_IENS_RTRYLMTORLATECOL | |
| ETH_IENS_TXUSEDBITREAD | |
| ETH_IENS_AMBAERR; |
| |
| /* Additional DMA configuration */ |
| eth->DMACFG |= _ETH_DMACFG_AMBABRSTLEN_MASK | |
| ETH_DMACFG_FRCDISCARDONERR | |
| ETH_DMACFG_TXPBUFTCPEN; |
| eth->DMACFG &= ~ETH_DMACFG_HDRDATASPLITEN; |
| |
| /* Set network configuration */ |
| eth->NETWORKCFG |= ETH_NETWORKCFG_FCSREMOVE | |
| ETH_NETWORKCFG_UNICASTHASHEN | |
| ETH_NETWORKCFG_MULTICASTHASHEN | |
| ETH_NETWORKCFG_RX1536BYTEFRAMES | |
| ETH_NETWORKCFG_RXCHKSUMOFFLOADEN; |
| |
| /* Setup PHY management port */ |
| eth->NETWORKCFG |= (4 << _ETH_NETWORKCFG_MDCCLKDIV_SHIFT) & |
| _ETH_NETWORKCFG_MDCCLKDIV_MASK; |
| eth->NETWORKCTRL |= ETH_NETWORKCTRL_MANPORTEN; |
| |
| /* Initialise PHY */ |
| result = phy_gecko_init(&cfg->phy); |
| if (result < 0) { |
| LOG_ERR("ETH PHY Initialization Error"); |
| return; |
| } |
| |
| /* Initialise TX/RX semaphores */ |
| k_sem_init(&dev_data->tx_sem, 1, ETH_TX_BUF_COUNT); |
| k_sem_init(&dev_data->rx_sem, 0, K_SEM_MAX_LIMIT); |
| |
| /* Start interruption-poll thread */ |
| k_thread_create(&dev_data->rx_thread, dev_data->rx_thread_stack, |
| K_KERNEL_STACK_SIZEOF(dev_data->rx_thread_stack), |
| rx_thread, (void *) dev, NULL, NULL, |
| K_PRIO_COOP(CONFIG_ETH_GECKO_RX_THREAD_PRIO), |
| 0, K_NO_WAIT); |
| } |
| |
| static enum ethernet_hw_caps eth_gecko_get_capabilities(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return (ETHERNET_AUTO_NEGOTIATION_SET | ETHERNET_LINK_10BASE_T | |
| ETHERNET_LINK_100BASE_T | ETHERNET_DUPLEX_SET); |
| } |
| |
| static const struct ethernet_api eth_api = { |
| .iface_api.init = eth_iface_init, |
| .get_capabilities = eth_gecko_get_capabilities, |
| .send = eth_tx, |
| }; |
| |
| static void eth0_irq_config(void) |
| { |
| IRQ_CONNECT(DT_INST_IRQN(0), |
| DT_INST_IRQ(0, priority), eth_isr, |
| DEVICE_DT_INST_GET(0), 0); |
| irq_enable(DT_INST_IRQN(0)); |
| } |
| |
| static const struct eth_gecko_pin_list pins_eth0 = { |
| .mdio = PIN_LIST_PHY, |
| .rmii = PIN_LIST_RMII |
| }; |
| |
| static const struct eth_gecko_dev_cfg eth0_config = { |
| .regs = (ETH_TypeDef *) |
| DT_INST_REG_ADDR(0), |
| .pin_list = &pins_eth0, |
| .pin_list_size = ARRAY_SIZE(pins_eth0.mdio) + |
| ARRAY_SIZE(pins_eth0.rmii), |
| .config_func = eth0_irq_config, |
| .phy = { (ETH_TypeDef *) |
| DT_INST_REG_ADDR(0), |
| DT_INST_PROP(0, phy_address) }, |
| }; |
| |
| static struct eth_gecko_dev_data eth0_data = { |
| #if NODE_HAS_VALID_MAC_ADDR(DT_DRV_INST(0)) |
| .mac_addr = DT_INST_PROP(0, local_mac_address), |
| #endif |
| }; |
| |
| ETH_NET_DEVICE_DT_INST_DEFINE(0, eth_init, |
| NULL, ð0_data, ð0_config, |
| CONFIG_ETH_INIT_PRIORITY, ð_api, ETH_GECKO_MTU); |