blob: 083839a97106fe1baf2193b332a72b9d56fd3c59 [file] [log] [blame]
/*
* Copyright (c) 2020 Guillaume Paquet <guillaume.paquet@smile.fr>
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "rak5010_nrf52840-pinctrl.dtsi"
/ {
model = "RAKWireless RAK5010 Wistrio Board with a Nordic NRF52840 SoC";
compatible = "nordic,rak5010_nrf52840";
chosen {
zephyr,console = &uart1;
zephyr,shell-uart = &uart1;
zephyr,uart-mcumgr = &uart1;
zephyr,bt-mon-uart = &uart1;
zephyr,bt-c2h-uart = &uart1;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
};
leds {
compatible = "gpio-leds";
led0: led_0 {
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
label = "Green LED 0";
};
};
/* Declaration of aliases */
aliases {
led0 = &led0;
watchdog0 = &wdt0;
accel0 = &lis3dh;
};
};
&adc {
status = "okay";
};
&gpiote {
status = "okay";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
status = "okay";
current-speed = <115200>;
/* QUECTEL BG9X */
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
quectel_bg9x: quectel_bg9x {
compatible = "quectel,bg9x";
mdm-power-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
mdm-reset-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
mdm-dtr-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
mdm-wdisable-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
&uart1 {
current-speed = <115200>;
status = "okay";
pinctrl-0 = <&uart1_default>;
pinctrl-1 = <&uart1_sleep>;
pinctrl-names = "default", "sleep";
};
&i2c1 {
compatible = "nordic,nrf-twi";
status = "okay";
/* TI OPT3001 light sensor */
pinctrl-0 = <&i2c1_default>;
pinctrl-1 = <&i2c1_sleep>;
pinctrl-names = "default", "sleep";
opt3001@44 {
compatible = "ti,opt3001";
reg = <0x44>;
};
/* ST Microelectronics LIS3DH motion sensor */
lis3dh: lis3dh@19 {
compatible = "st,lis3dh", "st,lis2dh";
reg = <0x19>;
irq-gpios = <&gpio0 15 0>;
};
/* ST Microelectronics LPS22HB pressure sensor */
lps22hb-press@5c {
compatible = "st,lps22hb-press";
reg = <0x5c>;
};
};
&qspi {
status = "okay";
pinctrl-0 = <&qspi_default>;
pinctrl-1 = <&qspi_sleep>;
pinctrl-names = "default", "sleep";
is25wp064a: is25wp064a@0 {
compatible = "nordic,qspi-nor";
reg = <0>;
writeoc = "pp4io";
readoc = "read4io";
sck-frequency = <16000000>;
jedec-id = [9d 70 17];
size = <67108864>;
has-dpd;
t-enter-dpd = <3000>;
t-exit-dpd = <5000>;
};
};
&flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 0x0000C000>;
};
slot0_partition: partition@c000 {
label = "image-0";
reg = <0x0000C000 0x00067000>;
};
slot1_partition: partition@73000 {
label = "image-1";
reg = <0x00073000 0x00067000>;
};
scratch_partition: partition@da000 {
label = "image-scratch";
reg = <0x000da000 0x0001e000>;
};
/*
* The flash starting at 0x000f8000 and ending at
* 0x000fffff is reserved for use by the application.
*/
/*
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@f8000 {
label = "storage";
reg = <0x000f8000 0x00008000>;
};
};
};
zephyr_udc0: &usbd {
compatible = "nordic,nrf-usbd";
status = "okay";
};