blob: fce736e9c24723c1ab8c3b981e2fa9426de26437 [file] [log] [blame]
/*
* Copyright (c) 2020 STMicroelectronics
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @brief Common part of DMAMUX drivers for stm32.
* @note api functions named dmamux_stm32_
* are calling the dma_stm32 corresponding function
* implemented in dma_stm32.c
*/
#include <soc.h>
#include <stm32_ll_dmamux.h>
#include <zephyr/init.h>
#include <zephyr/drivers/dma.h>
#include <zephyr/drivers/clock_control.h>
#include <zephyr/drivers/clock_control/stm32_clock_control.h>
#include "dma_stm32.h"
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(dmamux_stm32, CONFIG_DMA_LOG_LEVEL);
#define DT_DRV_COMPAT st_stm32_dmamux
/* this is the configuration of one dmamux channel */
struct dmamux_stm32_channel {
/* pointer to the associated dma instance */
const struct device *dev_dma;
/* ref of the associated dma stream for this instance */
uint8_t dma_id;
};
/* the table of all the dmamux channel */
struct dmamux_stm32_data {
void *callback_arg;
void (*dmamux_callback)(void *arg, uint32_t id,
int error_code);
};
/* this is the configuration of the dmamux IP */
struct dmamux_stm32_config {
#if DT_INST_NODE_HAS_PROP(0, clocks)
struct stm32_pclken pclken;
#endif
uint32_t base;
uint8_t channel_nb; /* total nb of channels */
uint8_t gen_nb; /* total nb of Request generator */
uint8_t req_nb; /* total nb of Peripheral Request inputs */
const struct dmamux_stm32_channel *mux_channels;
};
/*
* LISTIFY is used to generate arrays with function pointers to check
* and clear interrupt flags using LL functions
*/
#define DMAMUX_CHANNEL(i, _) LL_DMAMUX_CHANNEL_ ## i
#define IS_ACTIVE_FLAG_SOX(i, _) LL_DMAMUX_IsActiveFlag_SO ## i
#define CLEAR_FLAG_SOX(i, _) LL_DMAMUX_ClearFlag_SO ## i
#define IS_ACTIVE_FLAG_RGOX(i, _) LL_DMAMUX_IsActiveFlag_RGO ## i
#define CLEAR_FLAG_RGOX(i, _) LL_DMAMUX_ClearFlag_RGO ## i
uint32_t table_ll_channel[] = {
LISTIFY(DT_INST_PROP(0, dma_channels), DMAMUX_CHANNEL, (,))
};
uint32_t (*func_ll_is_active_so[])(DMAMUX_Channel_TypeDef *DMAMUXx) = {
LISTIFY(DT_INST_PROP(0, dma_channels), IS_ACTIVE_FLAG_SOX, (,))
};
void (*func_ll_clear_so[])(DMAMUX_Channel_TypeDef *DMAMUXx) = {
LISTIFY(DT_INST_PROP(0, dma_channels), CLEAR_FLAG_SOX, (,))
};
uint32_t (*func_ll_is_active_rgo[])(DMAMUX_Channel_TypeDef *DMAMUXx) = {
LISTIFY(DT_INST_PROP(0, dma_generators), IS_ACTIVE_FLAG_RGOX, (,))
};
void (*func_ll_clear_rgo[])(DMAMUX_Channel_TypeDef *DMAMUXx) = {
LISTIFY(DT_INST_PROP(0, dma_generators), CLEAR_FLAG_RGOX, (,))
};
int dmamux_stm32_configure(const struct device *dev, uint32_t id,
struct dma_config *config)
{
/* device is the dmamux, id is the dmamux channel from 0 */
const struct dmamux_stm32_config *dev_config = dev->config;
/*
* request line ID for this mux channel is stored
* in the dma_slot parameter
*/
int request_id = config->dma_slot;
if (request_id > dev_config->req_nb + dev_config->gen_nb) {
LOG_ERR("request ID %d is not valid.", request_id);
return -EINVAL;
}
/* check if this channel is valid */
if (id >= dev_config->channel_nb) {
LOG_ERR("channel ID %d is too big.", id);
return -EINVAL;
}
/*
* Also configures the corresponding dma channel
* instance is given by the dev_dma
* stream is given by the index i
* config is directly this dma_config
*/
/*
* This dmamux channel 'id' is now used for this peripheral request
* It gives this mux request ID to the dma through the config.dma_slot
*/
if (dma_stm32_configure(dev_config->mux_channels[id].dev_dma,
dev_config->mux_channels[id].dma_id, config) != 0) {
LOG_ERR("cannot configure the dmamux.");
return -EINVAL;
}
/* set the Request Line ID to this dmamux channel i */
DMAMUX_Channel_TypeDef *dmamux =
(DMAMUX_Channel_TypeDef *)dev_config->base;
LL_DMAMUX_SetRequestID(dmamux, id, request_id);
return 0;
}
int dmamux_stm32_start(const struct device *dev, uint32_t id)
{
const struct dmamux_stm32_config *dev_config = dev->config;
/* check if this channel is valid */
if (id >= dev_config->channel_nb) {
LOG_ERR("channel ID %d is too big.", id);
return -EINVAL;
}
if (dma_stm32_start(dev_config->mux_channels[id].dev_dma,
dev_config->mux_channels[id].dma_id) != 0) {
LOG_ERR("cannot start the dmamux channel %d.", id);
return -EINVAL;
}
return 0;
}
int dmamux_stm32_stop(const struct device *dev, uint32_t id)
{
const struct dmamux_stm32_config *dev_config = dev->config;
/* check if this channel is valid */
if (id >= dev_config->channel_nb) {
LOG_ERR("channel ID %d is too big.", id);
return -EINVAL;
}
if (dma_stm32_stop(dev_config->mux_channels[id].dev_dma,
dev_config->mux_channels[id].dma_id) != 0) {
LOG_ERR("cannot stop the dmamux channel %d.", id);
return -EINVAL;
}
return 0;
}
int dmamux_stm32_reload(const struct device *dev, uint32_t id,
uint32_t src, uint32_t dst, size_t size)
{
const struct dmamux_stm32_config *dev_config = dev->config;
/* check if this channel is valid */
if (id >= dev_config->channel_nb) {
LOG_ERR("channel ID %d is too big.", id);
return -EINVAL;
}
if (dma_stm32_reload(dev_config->mux_channels[id].dev_dma,
dev_config->mux_channels[id].dma_id,
src, dst, size) != 0) {
LOG_ERR("cannot reload the dmamux channel %d.", id);
return -EINVAL;
}
return 0;
}
int dmamux_stm32_get_status(const struct device *dev, uint32_t id,
struct dma_status *stat)
{
const struct dmamux_stm32_config *dev_config = dev->config;
/* check if this channel is valid */
if (id >= dev_config->channel_nb) {
LOG_ERR("channel ID %d is too big.", id);
return -EINVAL;
}
if (dma_stm32_get_status(dev_config->mux_channels[id].dev_dma,
dev_config->mux_channels[id].dma_id, stat) != 0) {
LOG_ERR("cannot get the status of dmamux channel %d.", id);
return -EINVAL;
}
return 0;
}
static int dmamux_stm32_init(const struct device *dev)
{
#if DT_INST_NODE_HAS_PROP(0, clocks)
const struct dmamux_stm32_config *config = dev->config;
const struct device *const clk = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
if (!device_is_ready(clk)) {
LOG_ERR("clock control device not ready");
return -ENODEV;
}
if (clock_control_on(clk,
(clock_control_subsys_t *) &config->pclken) != 0) {
LOG_ERR("clock op failed\n");
return -EIO;
}
#endif /* DT_INST_NODE_HAS_PROP(0, clocks) */
/* DMAs assigned to DMAMUX channels at build time might not be ready. */
#if DT_NODE_HAS_STATUS(DT_NODELABEL(dma1), okay)
if (device_is_ready(DEVICE_DT_GET(DT_NODELABEL(dma1))) == false) {
return -ENODEV;
}
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(dma2), okay)
if (device_is_ready(DEVICE_DT_GET(DT_NODELABEL(dma2))) == false) {
return -ENODEV;
}
#endif
return 0;
}
static const struct dma_driver_api dma_funcs = {
.reload = dmamux_stm32_reload,
.config = dmamux_stm32_configure,
.start = dmamux_stm32_start,
.stop = dmamux_stm32_stop,
.get_status = dmamux_stm32_get_status,
};
/*
* Each dmamux channel is hardwired to one dma controllers dma channel.
* DMAMUX_CHANNEL_INIT_X macros resolve this mapping at build time for each
* dmamux channel using the dma dt properties dma_offset and dma_requests,
* such that it can be stored in dmamux_stm32_channels_X configuration.
* The Macros to get the corresponding dma device binding and dma channel
* for a given dmamux channel, are currently valid for series having
* 1 dmamux and 1 or 2 dmas.
*/
#define DMA_1_BEGIN_DMAMUX_CHANNEL DT_PROP_OR(DT_NODELABEL(dma1), dma_offset, 0)
#define DMA_1_END_DMAMUX_CHANNEL (DMA_1_BEGIN_DMAMUX_CHANNEL + \
DT_PROP_OR(DT_NODELABEL(dma1), dma_requests, 0))
#define DEV_DMA1 COND_CODE_1(DT_NODE_HAS_STATUS(DT_NODELABEL(dma1), okay), \
DEVICE_DT_GET(DT_NODELABEL(dma1)), NULL)
#define DMA_2_BEGIN_DMAMUX_CHANNEL DT_PROP_OR(DT_NODELABEL(dma2), dma_offset, 0)
#define DMA_2_END_DMAMUX_CHANNEL (DMA_2_BEGIN_DMAMUX_CHANNEL + \
DT_PROP_OR(DT_NODELABEL(dma2), dma_requests, 0))
#define DEV_DMA2 COND_CODE_1(DT_NODE_HAS_STATUS(DT_NODELABEL(dma2), okay), \
DEVICE_DT_GET(DT_NODELABEL(dma2)), NULL)
#define DEV_DMA_BINDING(mux_channel) \
((mux_channel < DMA_1_END_DMAMUX_CHANNEL) ? DEV_DMA1 : DEV_DMA2)
#define DMA_CHANNEL(mux_channel) \
((mux_channel < DMA_1_END_DMAMUX_CHANNEL) ? \
(mux_channel + 1) : (mux_channel - DMA_2_BEGIN_DMAMUX_CHANNEL + 1))
/*
* No series implements more than 1 dmamux yet, dummy define added for easier
* future extension.
*/
#define INIT_DMAMUX_0_CHANNEL(x, ...) \
{ .dev_dma = DEV_DMA_BINDING(x), .dma_id = DMA_CHANNEL(x), }
#define INIT_DMAMUX_1_CHANNEL(x, ...) \
{ .dev_dma = 0, .dma_id = 0, }
#define DMAMUX_CHANNELS_INIT_0(count) \
LISTIFY(count, INIT_DMAMUX_0_CHANNEL, (,))
#define DMAMUX_CHANNELS_INIT_1(count) \
LISTIFY(count, INIT_DMAMUX_1_CHANNEL, (,))
#define DMAMUX_CLOCK_INIT(index) \
COND_CODE_1(DT_INST_NODE_HAS_PROP(index, clocks), \
(.pclken = { .bus = DT_INST_CLOCKS_CELL(index, bus), \
.enr = DT_INST_CLOCKS_CELL(index, bits)},), \
())
#define DMAMUX_INIT(index) \
static const struct dmamux_stm32_channel \
dmamux_stm32_channels_##index[DT_INST_PROP(index, dma_channels)] = { \
DMAMUX_CHANNELS_INIT_##index(DT_INST_PROP(index, dma_channels))\
}; \
\
const struct dmamux_stm32_config dmamux_stm32_config_##index = { \
DMAMUX_CLOCK_INIT(index) \
.base = DT_INST_REG_ADDR(index), \
.channel_nb = DT_INST_PROP(index, dma_channels), \
.gen_nb = DT_INST_PROP(index, dma_generators), \
.req_nb = DT_INST_PROP(index, dma_requests), \
.mux_channels = dmamux_stm32_channels_##index, \
}; \
\
static struct dmamux_stm32_data dmamux_stm32_data_##index; \
\
DEVICE_DT_INST_DEFINE(index, \
&dmamux_stm32_init, \
NULL, \
&dmamux_stm32_data_##index, &dmamux_stm32_config_##index,\
PRE_KERNEL_1, CONFIG_DMA_INIT_PRIORITY, \
&dma_funcs);
DT_INST_FOREACH_STATUS_OKAY(DMAMUX_INIT)