dts/bindings/mmc/st,stm32-sdmmc.yaml

description: stm32 sdmmc disk access

compatible: "st,stm32-sdmmc"

include: [mmc.yaml, pinctrl-device.yaml]

properties:
    clocks:
        required: true

    reg:
        required: true

    pinctrl-0:
      required: true

    pinctrl-names:
      required: true

    cd-gpios:
        type: phandle-array
        required: false
        description: Card Detect pin

    pwr-gpios:
        type: phandle-array
        required: false
        description: Power pin

    bus-width:
        type: int
        required: false
        default: 1
        description: |
            bus width for SDMMC access, defaults to the minimum necessary
            number of bus lines
        enum:
          - 1
          - 4
          - 8

    dmas:
      description: |
        Optional DMA channel specifier. If DMA should be used, specifier should
        hold a phandle reference to the dma controller, the channel number,
        the slot number, channel configuration and finally features.

        Only priority bits are used in the configuration. There are no feature
        flags.

        For example dmas for TX/RX on SDMMC
           dmas = <&dma2 4 6 0x30000 0x00>, <&dma2 4 3 0x30000 0x00>;

    dma-names:
      description: |
        DMA channel name. If DMA should be used, expected value is "tx", "rx".

        For example
           dma-names = "tx", "rx";