| .. _sht3xd: |
| |
| SHT3XD: High accuracy digital I2C humidity sensor |
| ################################################# |
| |
| Description |
| *********** |
| |
| This sample application periodically (2 Hz) measures the ambient |
| temperature and humidity. The result is written to the console. |
| Optionally, it also shows how to use the upper threshold triggers. |
| |
| References |
| ********** |
| |
| - `SHT3X-DIS sensor <https://www.sensirion.com/en/environmental-sensors/humidity-sensors/digital-humidity-sensors-for-various-applications/>`_ |
| |
| Wiring |
| ******* |
| |
| This sample uses the SHT3X_DIS sensor controlled using the I2C interface. |
| Connect Supply: **VDD**, **GND** and Interface: **SDA**, **SCL** |
| and optionally connect the **ALERT** to a interrupt capable GPIO. |
| The supply voltage can be in the 2.15V to 5.5V range. |
| Depending on the baseboard used, the **SDA** and **SCL** lines require Pull-Up |
| resistors. |
| |
| Building and Running |
| ******************** |
| |
| This project outputs sensor data to the console. It requires a SHT3XD |
| sensor. It should work with any platform featuring a I2C peripheral |
| interface. It does not work on QEMU. In this example below the |
| :ref:`nrf51_ble400` board is used. |
| |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/sensor/sht3xd |
| :board: nrf51_ble400 |
| :goals: build flash |
| |
| Sample Output |
| ============= |
| |
| .. code-block:: console |
| |
| SHT3XD: 19.64 Cel ; 41.96 %RH |
| SHT3XD: 19.74 Cel ; 42.06 %RH |
| SHT3XD: 19.75 Cel ; 42.08 %RH |
| |
| <repeats endlessly> |
