dts/bindings/gpio/xlnx,xps-gpio-1.00.a.yaml

description: Xilinx AXI GPIO IP node

compatible: "xlnx,xps-gpio-1.00.a"

include: [gpio-controller.yaml, base.yaml]

bus: xlnx,xps-gpio-1.00.a

# Property names correspond to a subset of those generated by
# https://github.com/Xilinx/device-tree-xlnx

properties:
  reg:
    required: true

  xlnx,all-inputs:
    type: int
    description: |
      1 if all GPIOs are inputs, 0 otherwise

  xlnx,all-outputs:
    type: int
    description: |
      1 if all GPIOs are outputs, 0 otherwise

  xlnx,dout-default:
    type: int
    description: |
      Default output value. If n-th bit is 1, GPIO-n default value is 1.

  xlnx,gpio-width:
    type: int
    description: |
      Number of GPIOs supported

  xlnx,tri-default:
    type: int
    description: |
      Default tristate register value. If n-th bit is 1, GPIO-n is an input.

  xlnx,is-dual:
    type: int
    description: |
      1 if controller has GPIO2 enabled, 0 otherwise

  xlnx,all-inputs-2:
    type: int
    description: |
      1 if all GPIO2s are inputs, 0 otherwise

  xlnx,all-outputs-2:
    type: int
    description: |
      1 if all GPIO2s are outputs, 0 otherwise

  xlnx,dout-default-2:
    type: int
    description: |
      Default output value. If n-th bit is 1, GPIO2-n default value is 1.

  xlnx,gpio2-width:
    type: int
    description: |
      Number of GPIO2s supported

  xlnx,tri-default-2:
    type: int
    description: |
      Default tristate register value. If n-th bit is 1, GPIO2-n is an input.

  "#gpio-cells":
    const: 2

gpio-cells:
  - pin
  - flags