| /* |
| * Copyright (c) 2017 Florian Vaussard, HEIG-VD |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <st/f4/stm32f412-pinctrl.dtsi> |
| #include <st/f4/stm32f411.dtsi> |
| |
| / { |
| soc { |
| pinctrl: pin-controller@40020000 { |
| reg = <0x40020000 0x1c00>; |
| |
| gpiof: gpio@40021400 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40021400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000020>; |
| label = "GPIOF"; |
| }; |
| |
| gpiog: gpio@40021800 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x40021800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000040>; |
| label = "GPIOG"; |
| }; |
| }; |
| |
| usart3: serial@40004800 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40004800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00040000>; |
| interrupts = <39 0>; |
| status = "disabled"; |
| label = "UART_3"; |
| }; |
| |
| timers6: timers@40001000 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40001000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000010>; |
| status = "disabled"; |
| label = "TIMERS_6"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| st,prescaler = <10000>; |
| label = "PWM_6"; |
| #pwm-cells = <2>; |
| }; |
| }; |
| |
| timers7: timers@40001400 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40001400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000020>; |
| status = "disabled"; |
| label = "TIMERS_7"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| st,prescaler = <10000>; |
| label = "PWM_7"; |
| #pwm-cells = <2>; |
| }; |
| }; |
| |
| timers8: timers@40010400 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40010400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000002>; |
| status = "disabled"; |
| label = "TIMERS_8"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| st,prescaler = <10000>; |
| label = "PWM_8"; |
| #pwm-cells = <2>; |
| }; |
| }; |
| |
| timers12: timers@40001800 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40001800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000040>; |
| status = "disabled"; |
| label = "TIMERS_12"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| st,prescaler = <10000>; |
| label = "PWM_12"; |
| #pwm-cells = <2>; |
| }; |
| }; |
| |
| timers13: timers@40001c00 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40001c00 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000080>; |
| status = "disabled"; |
| label = "TIMERS_13"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| st,prescaler = <10000>; |
| label = "PWM_13"; |
| #pwm-cells = <2>; |
| }; |
| }; |
| |
| timers14: timers@40002000 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40002000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000100>; |
| status = "disabled"; |
| label = "TIMERS_14"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| st,prescaler = <10000>; |
| label = "PWM_14"; |
| #pwm-cells = <2>; |
| }; |
| }; |
| |
| usbotg_fs: usb@50000000 { |
| num-bidir-endpoints = <6>; |
| }; |
| }; |
| }; |