blob: 4fd582d5c17f38fe738e4dbb6ef1b2001437fab7 [file] [log] [blame]
.. _sam4s_xplained:
SAM4S Xplained
################
Overview
********
The SAM4S Xplained evaluation kit is a development platform to evaluate the
Atmel SAM4S series microcontrollers.
.. image:: img/sam4s_xplained.png
:width: 500px
:align: center
:alt: SAM4S Xplained
Hardware
********
- ATSAM4S16C ARM Cortex-M4 Processor
- 12 MHz crystal oscillator
- internal 32.768 kHz crystal oscillator
- IS66WV51216DALL 8 Mb SRAM
- Micro-AB USB device
- Micro-AB USB debug interface supporting SEGGER OB and Virtual COM Port and
Data
- One reset and one user pushbutton
- 2 yellow user LEDs
- IC pads for external flash chip
Supported Features
==================
The sam4s_xplained board configuration supports the following hardware
features:
+-----------+------------+-------------------------------------+
| Interface | Controller | Driver/Component |
+===========+============+=====================================+
| NVIC | on-chip | nested vector interrupt controller |
+-----------+------------+-------------------------------------+
| SYSTICK | on-chip | systick |
+-----------+------------+-------------------------------------+
| UART | on-chip | serial port |
+-----------+------------+-------------------------------------+
| USART | on-chip | serial port |
+-----------+------------+-------------------------------------+
| I2C | on-chip | i2c |
+-----------+------------+-------------------------------------+
| SPI | on-chip | spi |
+-----------+------------+-------------------------------------+
| WATCHDOG | on-chip | watchdog |
+-----------+------------+-------------------------------------+
| GPIO | on-chip | gpio |
+-----------+------------+-------------------------------------+
Other hardware features are not currently supported by Zephyr.
The default configuration can be found in the Kconfig
:zephyr_file:`boards/arm/sam4s_xplained/sam4s_xplained_defconfig`.
Connections and IOs
===================
Download the `SAM4S Xplained Design Files`_ for more information. It has
full schematic and gerbers files.
System Clock
============
The SAM4S MCU is configured to use the 12 MHz internal oscillator on the board
with the on-chip PLL to generate an 84 MHz system clock.
Serial Port
===========
The ATSAM4S16C MCU has 2 UARTs and 2 USARTs. One of the UARTs (UART0) is
connected to the Segger J-Link OB chip (the AT91SAM3U4 is programmed to be
Segger J-Link OB). Segger J-Link OB brings the UART out as a virtual COM port.
The section flashing uses the UART from the Segger USB debug connection.
Programming and Debugging
*************************
The SAM4S Xplained board comes with Segger `J-Link OB <https://www.segger.com/jlink-ob.html>`_. This provides a debug
interface to the SAM4S16C chip. You can use Ozone or JLink to communicate with
the SAM4S16C.
Flashing
========
#. Download JLink from the Segger `JLink Downloads Page`_. Go to the section
"J-Link Software and Documentation Pack" and install the "J-Link Software and
Documentation pack for Linux". The application JLinkExe needs to be accessible
from your path.
#. Run your favorite terminal program to listen for output. Under Linux the
terminal should be :code:`/dev/ttyACM0`. For example:
.. code-block:: console
$ minicom -D /dev/ttyACM0 -o
The -o option tells minicom not to send the modem initialization
string. Connection should be configured as follows:
- Speed: 115200
- Data: 8 bits
- Parity: None
- Stop bits: 1
#. Connect the SAM4S Xplained board to your host computer using the
USB debug port. Then build and flash the :ref:`hello_world`
application.
.. zephyr-app-commands::
:zephyr-app: samples/hello_world
:board: sam4s_xplained
:goals: build flash
You should see "Hello World! arm" in your terminal.
Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`hello_world` application.
.. zephyr-app-commands::
:zephyr-app: samples/hello_world
:board: sam4s_xplained
:maybe-skip-config:
:goals: debug
References
**********
.. target-notes::
.. _SAM4S Xplained Online User Guide:
http://ww1.microchip.com/downloads/en/devicedoc/atmel-42075-sam4s-xplained-pro_user-guide.pdf
.. _JLink Downloads Page:
https://www.segger.com/downloads/jlink
.. _SAM4S Xplained Design Files:
http://ww1.microchip.com/downloads/en/DeviceDoc/SAM4S-XPLD__KitsFiles.zip