| /* hci_stm32wba.c - HCI driver for stm32wba */ |
| |
| /* |
| * Copyright (c) 2022, Telink Semiconductor (Shanghai) Co., Ltd. |
| * Copyright (c) 2023 STMicroelectronics |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/init.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/bluetooth/hci.h> |
| #include <zephyr/drivers/bluetooth.h> |
| #include <zephyr/bluetooth/addr.h> |
| #include <zephyr/drivers/clock_control/stm32_clock_control.h> |
| #include <linklayer_plat_local.h> |
| |
| #include <zephyr/sys/byteorder.h> |
| |
| #include "blestack.h" |
| #include "app_conf.h" |
| #include "ll_sys.h" |
| #include "flash_driver.h" |
| |
| #define LOG_LEVEL CONFIG_BT_HCI_DRIVER_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(hci_wba); |
| |
| #define DT_DRV_COMPAT st_hci_stm32wba |
| |
| struct hci_data { |
| bt_hci_recv_t recv; |
| }; |
| |
| static K_SEM_DEFINE(hci_sem, 1, 1); |
| |
| #define BLE_CTRLR_STACK_BUFFER_SIZE 300 |
| |
| #define MBLOCK_COUNT (BLE_MBLOCKS_CALC(PREP_WRITE_LIST_SIZE, \ |
| CFG_BLE_ATT_MTU_MAX, \ |
| CFG_BLE_NUM_LINK) \ |
| + CFG_BLE_MBLOCK_COUNT_MARGIN) |
| |
| #define BLE_DYN_ALLOC_SIZE \ |
| (BLE_TOTAL_BUFFER_SIZE(CFG_BLE_NUM_LINK, MBLOCK_COUNT)) |
| |
| /* GATT buffer size (in bytes)*/ |
| #define BLE_GATT_BUF_SIZE \ |
| BLE_TOTAL_BUFFER_SIZE_GATT(CFG_BLE_NUM_GATT_ATTRIBUTES, \ |
| CFG_BLE_NUM_GATT_SERVICES, \ |
| CFG_BLE_ATT_VALUE_ARRAY_SIZE) |
| |
| #define DIVC(x, y) (((x)+(y)-1)/(y)) |
| |
| #if defined(CONFIG_BT_HCI_SETUP) |
| /* Bluetooth LE public STM32WBA default device address (if udn not available) */ |
| static bt_addr_t bd_addr_dflt = {{0x65, 0x43, 0x21, 0x1E, 0x08, 0x00}}; |
| |
| #define ACI_HAL_WRITE_CONFIG_DATA BT_OP(BT_OGF_VS, 0xFC0C) |
| #define HCI_CONFIG_DATA_PUBADDR_OFFSET 0 |
| static bt_addr_t bd_addr_udn; |
| struct aci_set_ble_addr { |
| uint8_t config_offset; |
| uint8_t length; |
| uint8_t value[6]; |
| } __packed; |
| #endif |
| |
| static uint32_t __noinit buffer[DIVC(BLE_DYN_ALLOC_SIZE, 4)]; |
| static uint32_t __noinit gatt_buffer[DIVC(BLE_GATT_BUF_SIZE, 4)]; |
| |
| extern uint8_t ll_state_busy; |
| |
| static bool is_hci_event_discardable(const uint8_t *evt_data) |
| { |
| uint8_t evt_type = evt_data[0]; |
| |
| switch (evt_type) { |
| #if defined(CONFIG_BT_CLASSIC) |
| case BT_HCI_EVT_INQUIRY_RESULT_WITH_RSSI: |
| case BT_HCI_EVT_EXTENDED_INQUIRY_RESULT: |
| return true; |
| #endif |
| case BT_HCI_EVT_LE_META_EVENT: { |
| uint8_t subevt_type = evt_data[sizeof(struct bt_hci_evt_hdr)]; |
| |
| switch (subevt_type) { |
| case BT_HCI_EVT_LE_ADVERTISING_REPORT: |
| return true; |
| default: |
| return false; |
| } |
| } |
| default: |
| return false; |
| } |
| } |
| |
| static struct net_buf *treat_evt(const uint8_t *data, size_t len) |
| { |
| bool discardable; |
| struct bt_hci_evt_hdr hdr; |
| struct net_buf *buf; |
| size_t buf_tailroom; |
| |
| if (len < sizeof(hdr)) { |
| LOG_ERR("Not enough data for event header"); |
| return NULL; |
| } |
| |
| discardable = is_hci_event_discardable(data); |
| |
| memcpy((void *)&hdr, data, sizeof(hdr)); |
| data += sizeof(hdr); |
| len -= sizeof(hdr); |
| |
| if (len != hdr.len) { |
| LOG_ERR("Event payload length is not correct.\n"); |
| LOG_ERR("len: %d, hdr.len: %d\n", len, hdr.len); |
| return NULL; |
| } |
| LOG_DBG("len %u", hdr.len); |
| |
| buf = bt_buf_get_evt(hdr.evt, discardable, discardable ? K_NO_WAIT : K_SECONDS(3)); |
| if (!buf) { |
| if (discardable) { |
| LOG_DBG("Discardable buffer pool full, ignoring event"); |
| } else { |
| LOG_ERR("No available event buffers!"); |
| |
| } |
| __ASSERT_NO_MSG(buf); |
| return buf; |
| } |
| |
| net_buf_add_mem(buf, &hdr, sizeof(hdr)); |
| |
| buf_tailroom = net_buf_tailroom(buf); |
| if (buf_tailroom < len) { |
| LOG_ERR("Not enough space in buffer %zu/%zu", len, buf_tailroom); |
| net_buf_unref(buf); |
| return NULL; |
| } |
| |
| net_buf_add_mem(buf, data, len); |
| |
| return buf; |
| } |
| |
| static struct net_buf *treat_acl(const uint8_t *data, size_t len, |
| const uint8_t *ext_data, size_t ext_len) |
| { |
| struct bt_hci_acl_hdr hdr; |
| struct net_buf *buf; |
| size_t buf_tailroom; |
| |
| if (len < sizeof(hdr)) { |
| LOG_ERR("Not enough data for ACL header"); |
| return NULL; |
| } |
| |
| buf = bt_buf_get_rx(BT_BUF_ACL_IN, K_NO_WAIT); |
| if (buf) { |
| memcpy((void *)&hdr, data, sizeof(hdr)); |
| data += sizeof(hdr); |
| len -= sizeof(hdr); |
| } else { |
| LOG_ERR("No available ACL buffers!"); |
| return NULL; |
| } |
| |
| if (ext_len != sys_le16_to_cpu(hdr.len)) { |
| LOG_ERR("ACL payload length is not correct"); |
| net_buf_unref(buf); |
| return NULL; |
| } |
| |
| net_buf_add_mem(buf, &hdr, sizeof(hdr)); |
| buf_tailroom = net_buf_tailroom(buf); |
| if (buf_tailroom < len) { |
| LOG_ERR("Not enough space in buffer %zu/%zu", len, buf_tailroom); |
| net_buf_unref(buf); |
| return NULL; |
| } |
| |
| LOG_DBG("ext_len %u", ext_len); |
| net_buf_add_mem(buf, ext_data, ext_len); |
| |
| return buf; |
| } |
| |
| static struct net_buf *treat_iso(const uint8_t *data, size_t len, |
| const uint8_t *ext_data, size_t ext_len) |
| { |
| struct bt_hci_iso_hdr hdr; |
| struct net_buf *buf; |
| size_t buf_tailroom; |
| |
| if (len < sizeof(hdr)) { |
| LOG_ERR("Not enough data for ISO header"); |
| return NULL; |
| } |
| |
| buf = bt_buf_get_rx(BT_BUF_ISO_IN, K_NO_WAIT); |
| if (buf) { |
| memcpy((void *)&hdr, data, sizeof(hdr)); |
| data += sizeof(hdr); |
| len -= sizeof(hdr); |
| } else { |
| LOG_ERR("No available ISO buffers!"); |
| return NULL; |
| } |
| |
| if (ext_len != bt_iso_hdr_len(sys_le16_to_cpu(hdr.len))) { |
| LOG_ERR("ISO payload length is not correct"); |
| net_buf_unref(buf); |
| return NULL; |
| } |
| |
| net_buf_add_mem(buf, &hdr, sizeof(hdr)); |
| buf_tailroom = net_buf_tailroom(buf); |
| if (buf_tailroom < len) { |
| LOG_ERR("Not enough space in buffer %zu/%zu", len, buf_tailroom); |
| net_buf_unref(buf); |
| return NULL; |
| } |
| |
| LOG_DBG("ext_len %zu", ext_len); |
| net_buf_add_mem(buf, ext_data, ext_len); |
| |
| return buf; |
| } |
| |
| static int receive_data(const struct device *dev, const uint8_t *data, size_t len, |
| const uint8_t *ext_data, size_t ext_len) |
| { |
| struct hci_data *hci = dev->data; |
| uint8_t pkt_indicator; |
| struct net_buf *buf; |
| int err = 0; |
| |
| LOG_HEXDUMP_DBG(data, len, "host packet data:"); |
| LOG_HEXDUMP_DBG(ext_data, ext_len, "host packet ext_data:"); |
| |
| pkt_indicator = *data++; |
| len -= sizeof(pkt_indicator); |
| |
| switch (pkt_indicator) { |
| case BT_HCI_H4_EVT: |
| buf = treat_evt(data, len); |
| break; |
| case BT_HCI_H4_ACL: |
| buf = treat_acl(data, len + 1, ext_data, ext_len); |
| break; |
| case BT_HCI_H4_ISO: |
| case BT_HCI_H4_SCO: |
| buf = treat_iso(data, len + 1, ext_data, ext_len); |
| break; |
| default: |
| buf = NULL; |
| LOG_ERR("Unknown HCI type %u", pkt_indicator); |
| } |
| |
| if (buf) { |
| hci->recv(dev, buf); |
| } else { |
| err = -ENOMEM; |
| ll_state_busy = 1; |
| } |
| |
| return err; |
| } |
| |
| uint8_t BLECB_Indication(const uint8_t *data, uint16_t length, |
| const uint8_t *ext_data, uint16_t ext_length) |
| { |
| const struct device *dev = DEVICE_DT_GET(DT_DRV_INST(0)); |
| int ret = 0; |
| int err; |
| |
| LOG_DBG("length: %d", length); |
| if (ext_length != 0) { |
| LOG_DBG("ext_length: %d", ext_length); |
| } |
| |
| k_sem_take(&hci_sem, K_FOREVER); |
| |
| err = receive_data(dev, data, (size_t)length - 1, |
| ext_data, (size_t)ext_length); |
| |
| k_sem_give(&hci_sem); |
| |
| HostStack_Process(); |
| |
| if (err) { |
| ret = 1; |
| } |
| |
| return ret; |
| } |
| |
| static int bt_hci_stm32wba_send(const struct device *dev, struct net_buf *buf) |
| { |
| uint16_t event_length; |
| uint8_t pkt_indicator; |
| uint8_t tx_buffer[BLE_CTRLR_STACK_BUFFER_SIZE]; |
| |
| ARG_UNUSED(dev); |
| |
| k_sem_take(&hci_sem, K_FOREVER); |
| |
| LOG_DBG("buf %p type %u len %u", buf, bt_buf_get_type(buf), buf->len); |
| |
| switch (bt_buf_get_type(buf)) { |
| case BT_BUF_ACL_OUT: |
| pkt_indicator = BT_HCI_H4_ACL; |
| break; |
| case BT_BUF_CMD: |
| pkt_indicator = BT_HCI_H4_CMD; |
| break; |
| case BT_BUF_ISO_OUT: |
| pkt_indicator = BT_HCI_H4_ISO; |
| break; |
| default: |
| LOG_ERR("Unknown type %u", bt_buf_get_type(buf)); |
| k_sem_give(&hci_sem); |
| return -EIO; |
| } |
| net_buf_push_u8(buf, pkt_indicator); |
| |
| memcpy(&tx_buffer, buf->data, buf->len); |
| |
| event_length = BleStack_Request(tx_buffer); |
| LOG_DBG("event_length: %u", event_length); |
| |
| if (event_length) { |
| receive_data(dev, (uint8_t *)&tx_buffer, (size_t)event_length, NULL, 0); |
| } |
| |
| k_sem_give(&hci_sem); |
| |
| net_buf_unref(buf); |
| |
| return 0; |
| } |
| |
| static int bt_ble_ctlr_init(void) |
| { |
| BleStack_init_t init_params_p = {0}; |
| |
| init_params_p.numAttrRecord = CFG_BLE_NUM_GATT_ATTRIBUTES; |
| init_params_p.numAttrServ = CFG_BLE_NUM_GATT_SERVICES; |
| init_params_p.attrValueArrSize = CFG_BLE_ATT_VALUE_ARRAY_SIZE; |
| init_params_p.prWriteListSize = CFG_BLE_ATTR_PREPARE_WRITE_VALUE_SIZE; |
| init_params_p.attMtu = CFG_BLE_ATT_MTU_MAX; |
| init_params_p.max_coc_nbr = CFG_BLE_COC_NBR_MAX; |
| init_params_p.max_coc_mps = CFG_BLE_COC_MPS_MAX; |
| init_params_p.max_coc_initiator_nbr = CFG_BLE_COC_INITIATOR_NBR_MAX; |
| init_params_p.numOfLinks = CFG_BLE_NUM_LINK; |
| init_params_p.mblockCount = CFG_BLE_MBLOCK_COUNT; |
| init_params_p.bleStartRamAddress = (uint8_t *)buffer; |
| init_params_p.total_buffer_size = BLE_DYN_ALLOC_SIZE; |
| init_params_p.bleStartRamAddress_GATT = (uint8_t *)gatt_buffer; |
| init_params_p.total_buffer_size_GATT = BLE_GATT_BUF_SIZE; |
| init_params_p.options = CFG_BLE_OPTIONS; |
| init_params_p.debug = 0U; |
| |
| if (BleStack_Init(&init_params_p) != BLE_STATUS_SUCCESS) { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int bt_hci_stm32wba_open(const struct device *dev, bt_hci_recv_t recv) |
| { |
| struct hci_data *data = dev->data; |
| int ret = 0; |
| |
| link_layer_register_isr(); |
| |
| ll_sys_config_params(); |
| |
| ret = bt_ble_ctlr_init(); |
| if (ret == 0) { |
| data->recv = recv; |
| } |
| |
| /* TODO. Enable Flash manager once available */ |
| if (IS_ENABLED(CONFIG_FLASH)) { |
| FD_SetStatus(FD_FLASHACCESS_RFTS_BYPASS, LL_FLASH_DISABLE); |
| } |
| |
| return ret; |
| } |
| |
| #if defined(CONFIG_BT_HCI_SETUP) |
| |
| bt_addr_t *bt_get_ble_addr(void) |
| { |
| bt_addr_t *bd_addr; |
| uint32_t udn; |
| uint32_t company_id; |
| uint32_t device_id; |
| |
| /* Get the 64 bit Unique Device Number UID */ |
| /* The UID is used by firmware to derive */ |
| /* 48-bit Device Address EUI-48 */ |
| udn = LL_FLASH_GetUDN(); |
| |
| if (udn != 0xFFFFFFFF) { |
| /* Get the ST Company ID */ |
| company_id = LL_FLASH_GetSTCompanyID(); |
| /* Get the STM32 Device ID */ |
| device_id = LL_FLASH_GetDeviceID(); |
| |
| /* |
| * Public Address with the ST company ID |
| * bit[47:24] : 24bits (OUI) equal to the company ID |
| * bit[23:16] : Device ID. |
| * bit[15:0] : The last 16bits from the UDN |
| * Note: In order to use the Public Address in a final product, a dedicated |
| * 24bits company ID (OUI) shall be bought. |
| */ |
| |
| bd_addr_udn.val[0] = (uint8_t)(udn & 0x000000FF); |
| bd_addr_udn.val[1] = (uint8_t)((udn & 0x0000FF00) >> 8); |
| bd_addr_udn.val[2] = (uint8_t)device_id; |
| bd_addr_udn.val[3] = (uint8_t)(company_id & 0x000000FF); |
| bd_addr_udn.val[4] = (uint8_t)((company_id & 0x0000FF00) >> 8); |
| bd_addr_udn.val[5] = (uint8_t)((company_id & 0x00FF0000) >> 16); |
| bd_addr = &bd_addr_udn; |
| } else { |
| bd_addr = &bd_addr_dflt; |
| } |
| |
| return bd_addr; |
| } |
| |
| static int bt_hci_stm32wba_setup(const struct device *dev, |
| const struct bt_hci_setup_params *params) |
| { |
| bt_addr_t *uid_addr; |
| struct aci_set_ble_addr *param; |
| struct net_buf *buf; |
| int err; |
| |
| uid_addr = bt_get_ble_addr(); |
| if (!uid_addr) { |
| return -ENOMSG; |
| } |
| |
| buf = bt_hci_cmd_create(ACI_HAL_WRITE_CONFIG_DATA, sizeof(*param)); |
| if (!buf) { |
| return -ENOBUFS; |
| } |
| |
| param = net_buf_add(buf, sizeof(*param)); |
| param->config_offset = HCI_CONFIG_DATA_PUBADDR_OFFSET; |
| param->length = 6; |
| |
| if (bt_addr_eq(¶ms->public_addr, BT_ADDR_ANY)) { |
| bt_addr_copy((bt_addr_t *)param->value, uid_addr); |
| } else { |
| bt_addr_copy((bt_addr_t *)param->value, &(params->public_addr)); |
| } |
| |
| err = bt_hci_cmd_send_sync(ACI_HAL_WRITE_CONFIG_DATA, buf, NULL); |
| if (err) { |
| return err; |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_BT_HCI_SETUP */ |
| |
| static const struct bt_hci_driver_api drv = { |
| #if defined(CONFIG_BT_HCI_SETUP) |
| .setup = bt_hci_stm32wba_setup, |
| #endif |
| .open = bt_hci_stm32wba_open, |
| .send = bt_hci_stm32wba_send, |
| }; |
| |
| #define HCI_DEVICE_INIT(inst) \ |
| static struct hci_data hci_data_##inst = { \ |
| }; \ |
| DEVICE_DT_INST_DEFINE(inst, NULL, NULL, &hci_data_##inst, NULL, \ |
| POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &drv) |
| |
| /* Only one instance supported */ |
| HCI_DEVICE_INIT(0) |