| /* |
| * Copyright (c) 2020, Linaro Ltd. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Application overlay for testing driver builds |
| * |
| * Names in this file should be chosen in a way that won't conflict |
| * with real-world devicetree nodes, to allow these tests to run on |
| * (and be extended to test) real hardware. |
| */ |
| |
| / { |
| test { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| test_gpio: gpio@deadbeef { |
| compatible = "vnd,gpio"; |
| gpio-controller; |
| reg = <0xdeadbeef 0x1000>; |
| #gpio-cells = <0x2>; |
| status = "okay"; |
| }; |
| |
| test_spi: spi@33334444 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "vnd,spi"; |
| reg = <0x33334444 0x1000>; |
| status = "okay"; |
| clock-frequency = <2000000>; |
| |
| /* one entry for every devices at spi.dtsi */ |
| cs-gpios = <&test_gpio 0 0>, |
| <&test_gpio 0 0>, |
| <&test_gpio 0 0>, |
| <&test_gpio 0 0>, |
| <&test_gpio 0 0>; |
| |
| test_spi_enc28j60: enc28j60@0 { |
| compatible = "microchip,enc28j60"; |
| reg = <0x0>; |
| full-duplex; |
| spi-max-frequency = <0>; |
| int-gpios = <&test_gpio 0 0>; |
| local-mac-address = [00 00 00 00 00 00]; |
| }; |
| |
| test_spi_enc424j600: enc424j600@1 { |
| compatible = "microchip,enc424j600"; |
| reg = <0x1>; |
| spi-max-frequency = <0>; |
| int-gpios = <&test_gpio 0 0>; |
| local-mac-address = [00 00 00 00 00 00]; |
| }; |
| |
| test_spi_w5500: w5500@2 { |
| compatible = "wiznet,w5500"; |
| reg = <0x2>; |
| spi-max-frequency = <0>; |
| int-gpios = <&test_gpio 0 0>; |
| reset-gpios = <&test_gpio 0 0>; |
| }; |
| |
| test_spi_adin1110: adin1110@3 { |
| compatible = "adi,adin1110"; |
| reg = <0x3>; |
| spi-max-frequency = <25000000>; |
| int-gpios = <&test_gpio 0 0>; |
| reset-gpios = <&test_gpio 0 0>; |
| |
| port1 { |
| local-mac-address = [ CA 2F B7 10 23 63 ]; |
| }; |
| |
| mdio { |
| compatible = "adi,adin2111-mdio"; |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethernet-phy@1 { |
| reg = <0x1>; |
| compatible = "adi,adin2111-phy"; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| test_spi_adin2111: adin2111@4 { |
| compatible = "adi,adin2111"; |
| reg = <0x4>; |
| spi-max-frequency = <0>; |
| int-gpios = <&test_gpio 0 0>; |
| reset-gpios = <&test_gpio 0 0>; |
| |
| port1 { |
| local-mac-address = [ CA 2F B7 10 23 63 ]; |
| }; |
| port2 { |
| local-mac-address = [ 3C 82 D4 A2 29 8E ]; |
| }; |
| |
| mdio { |
| compatible = "adi,adin2111-mdio"; |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethernet-phy@1 { |
| reg = <0x1>; |
| compatible = "adi,adin2111-phy"; |
| status = "okay"; |
| }; |
| ethernet-phy@2 { |
| reg = <0x2>; |
| compatible = "adi,adin2111-phy"; |
| status = "okay"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |