| /* |
| * Copyright (c) 2022, NXP |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Note: File generated by rt_cfg_utils.py |
| * from mm_swiftio.mex |
| */ |
| |
| #include <nxp/nxp_imx/rt/mimxrt1052dvl6b-pinctrl.dtsi> |
| |
| &pinctrl { |
| pinmux_csi: pinmux_csi { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_04_csi_pixclk>, |
| <&iomuxc_gpio_ad_b1_05_csi_mclk>, |
| <&iomuxc_gpio_ad_b0_14_csi_vsync>, |
| <&iomuxc_gpio_ad_b0_15_csi_hsync>, |
| <&iomuxc_gpio_ad_b1_08_csi_data09>, |
| <&iomuxc_gpio_ad_b1_09_csi_data08>, |
| <&iomuxc_gpio_ad_b1_10_csi_data07>, |
| <&iomuxc_gpio_ad_b1_11_csi_data06>, |
| <&iomuxc_gpio_ad_b1_12_csi_data05>, |
| <&iomuxc_gpio_ad_b1_13_csi_data04>, |
| <&iomuxc_gpio_ad_b1_14_csi_data03>, |
| <&iomuxc_gpio_ad_b1_15_csi_data02>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpi2c1: pinmux_lpi2c1 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_01_lpi2c1_sda>, |
| <&iomuxc_gpio_ad_b1_00_lpi2c1_scl>; |
| drive-strength = "r0-6"; |
| drive-open-drain; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| input-enable; |
| }; |
| }; |
| |
| pinmux_lpi2c3: pinmux_lpi2c3 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b1_07_lpi2c3_scl>, |
| <&iomuxc_gpio_ad_b1_06_lpi2c3_sda>; |
| drive-strength = "r0-6"; |
| drive-open-drain; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart1: pinmux_lpuart1 { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b0_13_lpuart1_rx>, |
| <&iomuxc_gpio_ad_b0_12_lpuart1_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_lpuart1_sleep: pinmux_lpuart1_sleep { |
| group0 { |
| pinmux = <&iomuxc_gpio_ad_b0_13_gpio1_io13>; |
| drive-strength = "r0-6"; |
| bias-pull-up; |
| bias-pull-up-value = "100k"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_ad_b0_12_lpuart1_tx>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| pinmux_usdhc1: pinmux_usdhc1 { |
| group0 { |
| pinmux = <&iomuxc_gpio_sd_b0_01_usdhc1_clk>; |
| bias-disable; |
| drive-strength = "r0"; |
| input-schmitt-enable; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_b1_12_gpio2_io28>, |
| <&iomuxc_gpio_sd_b0_00_usdhc1_cmd>, |
| <&iomuxc_gpio_sd_b0_02_usdhc1_data0>, |
| <&iomuxc_gpio_sd_b0_03_usdhc1_data1>, |
| <&iomuxc_gpio_sd_b0_04_usdhc1_data2>, |
| <&iomuxc_gpio_sd_b0_05_usdhc1_data3>; |
| drive-strength = "r0"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| group2 { |
| pinmux = <&iomuxc_gpio_b1_14_usdhc1_vselect>; |
| drive-strength = "r0-4"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| group3 { |
| pinmux = <&iomuxc_gpio_ad_b0_05_gpio1_io05>; |
| drive-strength = "r0-6"; |
| slew-rate = "slow"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* fast pinmux settings for USDHC (over 100 Mhz) */ |
| pinmux_usdhc1_fast: pinmux_usdhc1_fast { |
| group0 { |
| pinmux = <&iomuxc_gpio_sd_b0_01_usdhc1_clk>; |
| bias-disable; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| slew-rate = "fast"; |
| nxp,speed = "200-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_sd_b0_00_usdhc1_cmd>, |
| <&iomuxc_gpio_sd_b0_02_usdhc1_data0>, |
| <&iomuxc_gpio_sd_b0_03_usdhc1_data1>, |
| <&iomuxc_gpio_sd_b0_04_usdhc1_data2>, |
| <&iomuxc_gpio_sd_b0_05_usdhc1_data3>; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "200-mhz"; |
| }; |
| }; |
| |
| /* medium pinmux settings for USDHC (under 100 Mhz) */ |
| pinmux_usdhc1_med: pinmux_usdhc1_med { |
| group0 { |
| pinmux = <&iomuxc_gpio_sd_b0_01_usdhc1_clk>; |
| bias-disable; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_sd_b0_00_usdhc1_cmd>, |
| <&iomuxc_gpio_sd_b0_02_usdhc1_data0>, |
| <&iomuxc_gpio_sd_b0_03_usdhc1_data1>, |
| <&iomuxc_gpio_sd_b0_04_usdhc1_data2>, |
| <&iomuxc_gpio_sd_b0_05_usdhc1_data3>; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "100-mhz"; |
| }; |
| }; |
| |
| /* slow pinmux settings for USDHC (under 50 Mhz) */ |
| pinmux_usdhc1_slow: pinmux_usdhc1_slow { |
| group0 { |
| pinmux = <&iomuxc_gpio_sd_b0_01_usdhc1_clk>; |
| bias-disable; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| slew-rate = "fast"; |
| nxp,speed = "50-mhz"; |
| }; |
| group1 { |
| pinmux = <&iomuxc_gpio_sd_b0_00_usdhc1_cmd>, |
| <&iomuxc_gpio_sd_b0_02_usdhc1_data0>, |
| <&iomuxc_gpio_sd_b0_03_usdhc1_data1>, |
| <&iomuxc_gpio_sd_b0_04_usdhc1_data2>, |
| <&iomuxc_gpio_sd_b0_05_usdhc1_data3>; |
| drive-strength = "r0-7"; |
| input-schmitt-enable; |
| bias-pull-up; |
| bias-pull-up-value = "47k"; |
| slew-rate = "fast"; |
| nxp,speed = "50-mhz"; |
| }; |
| }; |
| |
| }; |
| |