dts/arm/silabs/efr32bg22.dtsi

/*
 * Copyright (c) 2021 Sateesh Kotapati
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv8-m.dtsi>
#include <arm/silabs/gpio_gecko.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/pinctrl/gecko-pinctrl.h>

/ {
	chosen {
		zephyr,flash-controller = &msc;
		zephyr,entropy = &trng;
	};

	power-states {
		standby: standby {
			compatible = "zephyr,power-state";
			power-state-name = "standby";
			min-residency-us = <50000>;
		};
	};
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m33";
			reg = <0>;
			cpu-power-states = <&standby>;
		};
	};

	sram0: memory@20000000 {
		compatible = "mmio-sram";
	};

	soc {
		msc: flash-controller@50030000 {
			compatible = "silabs,gecko-flash-controller";
			reg = <0x50030000 0xC69>;
			interrupts = <49 0>;

			#address-cells = <1>;
			#size-cells = <1>;

			flash0: flash@0 {
				compatible = "soc-nv-flash";
				write-block-size = <4>;
				erase-block-size = <8192>;
			};
		};

		usart0: usart@5005c000 {
			compatible = "silabs,gecko-spi-usart";
			reg = <0x5005C000 0x400>;
			interrupts = <13 0>, <14 0>;
			interrupt-names = "rx", "tx";
			status = "disabled";

			#address-cells = <1>;
			#size-cells = <0>;

			status = "disabled";
		};

		usart1: usart@50060000 {
			compatible = "silabs,gecko-usart";
			reg = <0x50060000 0x400>;
			interrupts = <15 0>, <16 0>;
			interrupt-names = "rx", "tx";
			status = "disabled";
		};

		trng: trng@4c021000 {
			compatible = "silabs,gecko-trng";
			reg = <0x4C021000 0x1000>;
			status = "disabled";
			interrupts = <0x1 0x0>;
		};

		i2c0: i2c@5a010000 {
			compatible = "silabs,gecko-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			reg = <0x5a010000 0x3044>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <27 0>;
			status = "disabled";
		};

		i2c1: i2c@50068000 {
			compatible = "silabs,gecko-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			reg = <0x50068000 0x3044>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <28 0>;
			status = "disabled";
		};

		stimer0: stimer@58000000 {
			compatible = "silabs,gecko-stimer";
			reg = <0x58000000 0x3054>;
			interrupts = <12 0>;
			clock-frequency = <32768>;
			prescaler = <1>;
			status = "disabled";
		};

		gpio: gpio@5003c000 {
			compatible = "silabs,gecko-gpio";
			reg = <0x5003C000 0x3660>;
			interrupts = <10 2 18 2>;
			interrupt-names = "GPIO_EVEN", "GPIO_ODD";

			ranges;
			#address-cells = <1>;
			#size-cells = <1>;

			gpioa: gpio@5003c000 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x5003C000 0x30>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

			gpiob: gpio@5003c030 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x5003C030 0x30>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

			gpioc: gpio@5003c060 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x5003C060 0x30>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

			gpiod: gpio@5003c090 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x5003C090 0x30>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

			gpiof: gpio@5003c0c0 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x5003C0C0 0x30>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

		};

		wdog0: wdog@4a018000 {
			compatible = "silabs,gecko-wdog";
			reg = <0x4A018000 0x3028>;
			peripheral-id = <0>;
			interrupts = <43 0>;
			status = "disabled";
		};

	};
};

/ {
	pinctrl: pin-controller {
		/* Pin controller is a "virtual" device since SiLabs SoCs do pin
		 * control in a distributed way (GPIO registers and PSEL
		 * registers on each peripheral).
		 */
		compatible = "silabs,gecko-pinctrl";
	};
};

&nvic {
	arm,num-irq-priority-bits = <4>;
};