| /* |
| * Copyright (c) 2023 Marcin Niestroj |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| / { |
| aliases { |
| lora0 = &lora_semtech_sx1276mb1mas; |
| }; |
| }; |
| |
| &arduino_spi { |
| status = "okay"; |
| |
| cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>; /* D10 */ |
| |
| lora_semtech_sx1276mb1mas: lora@0 { |
| compatible = "semtech,sx1276"; |
| reg = <0x0>; |
| spi-max-frequency = <DT_FREQ_M(1)>; |
| |
| reset-gpios = <&arduino_header 0 GPIO_ACTIVE_LOW>; /* A0 */ |
| |
| dio-gpios = <&arduino_header 8 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* DIO0 is D2 */ |
| <&arduino_header 9 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* DIO1 is D3 */ |
| <&arduino_header 10 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* DIO2 is D4 */ |
| <&arduino_header 11 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* DIO3 is D5 */ |
| <&arduino_header 14 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* DIO4 is D8 */ |
| <&arduino_header 15 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>; /* DIO5 is D9 */ |
| |
| rfo-enable-gpios = <&arduino_header 4 GPIO_ACTIVE_HIGH>; /* RXTX_EXT is A4 */ |
| }; |
| }; |
