blob: 46c464e8ca0202f4d3eb15bfbbc90b6c9a667b89 [file] [log] [blame]
# Kconfig - x86 general configuration options
#
# Copyright (c) 2014-2015 Wind River Systems, Inc.
#
# SPDX-License-Identifier: Apache-2.0
#
choice
prompt "x86 SoC Selection"
depends on X86
source "arch/x86/soc/*/Kconfig.soc"
endchoice
menu "x86 Options"
depends on X86
config ARCH
default "x86"
config ARCH_DEFCONFIG
string
default "arch/x86/defconfig"
source "arch/x86/core/Kconfig"
#
# Hidden CPU family configs which are to be selected by
# individual SoC.
#
config CPU_ATOM
# Hidden
bool
select CMOV
select CPU_HAS_FPU
help
This option signifies the use of a CPU from the Atom family.
config CPU_MINUTEIA
# Hidden
bool
help
This option signifies the use of a CPU from the Minute IA family.
#
# End hidden CPU family configs
#
config CPU_HAS_FPU
# Hidden config selected by CPU family
bool
default n
help
This option is enabled when the CPU has hardware floating point
unit.
menu "Processor Capabilities"
config X86_IAMCU
bool
default n
prompt "IAMCU calling convention"
help
The IAMCU calling convention changes the X86 C calling convention to
pass some arguments via registers allowing for code size and performance
improvements. Great care needs to be taken if you have assembly code
that will be called from C or C code called from assembly code, the
assembly code will need to be updated to conform to the new calling
convention. If in doubt say N
config X86_MMU
bool
default n
prompt "Memory Management Unit"
help
This options enables the memory management unit present in x86. Enabling
this will create boot time page table structure.
config X86_STACK_PROTECTION
bool
default n
depends on X86_MMU
select SET_GDT
select GDT_DYNAMIC
prompt "MMU-based stack overflow protection"
help
This option leverages the MMU to cause a system fatal error if the
bounds of the current process stack are overflowed. This is done
by preceding all stack areas with a 4K guard page.
menu "Floating Point Options"
depends on CPU_HAS_FPU
config FLOAT
bool
prompt "Floating point registers"
default n
help
This option allows threads to use the x87 FPU/MMX registers. The
registers may be used by any number of cooperative threads or by
a single preemptible thread, but not both, since the kernel does not
preserve FPU context information when switching between threads.
Additional options must be enabled to permit the use of SSE registers or
to permit floating point register use by multiple preemptible threads.
Disabling this option means that any thread that uses the floating
point registers will get a fatal exception.
config FP_SHARING
bool
prompt "Floating point register sharing"
depends on FLOAT
default n
help
This option allows multiple preemptible threads to use the floating
point registers. Any preemptible thread that uses the registers must
provide stack space where the kernel can save FPU context info during
a preemptive context switch. A thread that uses only the x87 FPU/MMX
registers must provide 108 bytes of added stack space, while a thread
the uses the SSE registers must provide 464 bytes of added stack space.
config SSE
bool
prompt "SSE registers"
depends on FLOAT
default n
help
This option enables the use of SSE registers by threads.
config SSE_FP_MATH
bool
prompt "Compiler-generated SSEx instructions"
depends on SSE
default n
help
This option allows the compiler to generate SSEx instructions for
performing floating point math. This can greatly improve performance
when exactly the same operations are to be performed on multiple
data objects; however, it can also significantly reduce performance
when preemptive task switches occur because of the larger register
set that must be saved and restored.
Disabling this option means that the compiler utilizes only the
x87 instruction set for floating point operations.
endmenu
choice
prompt "Reboot implementation"
depends on REBOOT
default REBOOT_RST_CNT
config REBOOT_RST_CNT
bool
prompt "Reboot via RST_CNT register"
help
Reboot via the RST_CNT register, going back to BIOS.
endchoice
config ISA_IA32
bool
default y
help
This option signifies the use of a CPU based on the Intel IA-32
instruction set architecture.
config IA32_LEGACY_IO_PORTS
bool
prompt "Support IA32 legacy IO ports"
default n
depends on ISA_IA32
help
This option enables IA32 legacy IO ports. Note these are much slower
than memory access, so they should be used in last resort.
config CMOV
def_bool n
help
This option signifies the use of an Intel CPU that supports
the CMOV instruction.
config CACHE_LINE_SIZE_DETECT
bool
prompt "Detect cache line size at runtime"
default y
help
This option enables querying the CPUID register for finding the cache line
size at the expense of taking more memory and code and a slightly increased
boot time.
If the CPU's cache line size is known in advance, disable this option and
manually enter the value for CACHE_LINE_SIZE.
config CACHE_LINE_SIZE
int
prompt "Cache line size" if !CACHE_LINE_SIZE_DETECT
default 0 if CACHE_LINE_SIZE_DETECT
default 64 if CPU_ATOM
default 0
help
Size in bytes of a CPU cache line.
Detect automatically at runtime by selecting CACHE_LINE_SIZE_DETECT.
config CLFLUSH_INSTRUCTION_SUPPORTED
bool
prompt "CLFLUSH instruction supported"
depends on !CLFLUSH_DETECT && CACHE_FLUSHING
default n
help
An implementation of sys_cache_flush() that uses CLFLUSH is made
available, instead of the one using WBINVD.
This option should only be enabled if it is known in advance that the
CPU supports the CLFLUSH instruction. It disables runtime detection of
CLFLUSH support thereby reducing both memory footprint and boot time.
config CLFLUSH_DETECT
bool
prompt "Detect support of CLFLUSH instruction at runtime"
depends on CACHE_FLUSHING
default n
help
This option should be enabled if it is not known in advance whether the
CPU supports the CLFLUSH instruction or not.
The CPU is queried at boot time to determine which of the multiple
implementations of sys_cache_flush() linked into the image is the
correct one to use.
If the CPU's support (or lack thereof) of CLFLUSH is known in advance, then
disable this option and set CLFLUSH_INSTRUCTION_SUPPORTED as appropriate.
config ARCH_CACHE_FLUSH_DETECT
bool
default y
depends on CLFLUSH_DETECT
config CACHE_FLUSHING
bool
default n
prompt "Enable cache flushing mechanism"
help
This links in the sys_cache_flush() function. A mechanism for flushing the
cache must be selected as well. By default, that mechanism is discovered at
runtime.
endmenu
menu "Board Capabilities"
config PIC_DISABLE
bool "Disable PIC"
default n
help
This option disables all interrupts on the PIC
config IRQ_OFFLOAD
bool "Enable IRQ offload"
default n
help
Enable irq_offload() API which allows functions to be synchronously
run in interrupt context. Uses one entry in the IDT. Mainly useful
for test cases.
config IRQ_OFFLOAD_VECTOR
int "IDT vector to use for IRQ offload"
default 63 if MVIC
default 32 if !MVIC
range 32 255
depends on IRQ_OFFLOAD
help
Specify the IDT vector to use for the IRQ offload interrupt handler.
The default should be fine for most arches, but on systems like MVIC
where there is a fixed IRQ-to-vector mapping another value may be
needed to avoid collision.
config X86_KERNEL_OOPS
bool "Enable handling of kernel oops as an exception"
default y
help
Enable handling of k_oops() API as a CPU exception, which will provide
extra debugging information such as program counter and register
values when the oops is triggered. Requires an entry in the IDT.
config X86_KERNEL_OOPS_VECTOR
int "IDT vector to use for kernel oops"
default 62 if MVIC
default 33 if !MVIC
range 32 255
depends on X86_KERNEL_OOPS
help
Specify the IDT vector to use for the kernel oops exception handler.
The default should be fine for most arches, but on systems like MVIC
where there is a fixed IRQ-to-vector mapping another value may be
needed to avoid collision.
config XIP
default n
config X86_FIXED_IRQ_MAPPING
bool
default n
help
Specify whether the current interrupt controller in use has a fixed
mapping between IDT vectors and IRQ lines.
endmenu
source "arch/x86/soc/*/Kconfig"
endmenu