| /* |
| * Copyright (c) 2023 Antmicro <www.antmicro.com> |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT ambiq_mspi |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(mspi_ambiq); |
| |
| #include <zephyr/drivers/spi.h> |
| #include <zephyr/drivers/pinctrl.h> |
| #include <zephyr/kernel.h> |
| |
| #include "spi_context.h" |
| #include <am_mcu_apollo.h> |
| |
| #define SPI_WORD_SIZE 8 |
| #define MSPI_MAX_FREQ 96000000 |
| #define MSPI_TIMEOUT_US 1000000 |
| #define PWRCTRL_MAX_WAIT_US 5 |
| #define MSPI_BUSY BIT(2) |
| |
| typedef int (*ambiq_mspi_pwr_func_t)(void); |
| |
| struct mspi_ambiq_config { |
| uint32_t base; |
| int size; |
| uint32_t clock_freq; |
| const struct pinctrl_dev_config *pcfg; |
| ambiq_mspi_pwr_func_t pwr_func; |
| }; |
| |
| struct mspi_ambiq_data { |
| struct spi_context ctx; |
| void *mspiHandle; |
| am_hal_mspi_dev_config_t mspicfg; |
| }; |
| |
| static int mspi_set_freq(uint32_t freq) |
| { |
| uint32_t d = MSPI_MAX_FREQ / freq; |
| |
| switch (d) { |
| case AM_HAL_MSPI_CLK_96MHZ: |
| case AM_HAL_MSPI_CLK_48MHZ: |
| case AM_HAL_MSPI_CLK_32MHZ: |
| case AM_HAL_MSPI_CLK_24MHZ: |
| case AM_HAL_MSPI_CLK_16MHZ: |
| case AM_HAL_MSPI_CLK_12MHZ: |
| case AM_HAL_MSPI_CLK_8MHZ: |
| case AM_HAL_MSPI_CLK_6MHZ: |
| case AM_HAL_MSPI_CLK_4MHZ: |
| case AM_HAL_MSPI_CLK_3MHZ: |
| break; |
| default: |
| LOG_ERR("Frequency not supported!"); |
| d = AM_HAL_MSPI_CLK_INVALID; |
| break; |
| } |
| |
| return d; |
| } |
| |
| static int mspi_config(const struct device *dev, const struct spi_config *config) |
| { |
| struct mspi_ambiq_data *data = dev->data; |
| int ret; |
| am_hal_mspi_dev_config_t mspicfg = {0}; |
| |
| if (config->operation & SPI_HALF_DUPLEX) { |
| LOG_ERR("Half-duplex not supported"); |
| return -ENOTSUP; |
| } |
| |
| if (SPI_WORD_SIZE_GET(config->operation) != 8) { |
| LOG_ERR("Word size must be %d", SPI_WORD_SIZE); |
| return -ENOTSUP; |
| } |
| |
| if ((config->operation & SPI_LINES_MASK) != SPI_LINES_SINGLE) { |
| LOG_ERR("Only single mode is currently supported"); |
| return -ENOTSUP; |
| } |
| |
| if (config->operation & SPI_LOCK_ON) { |
| LOG_ERR("Lock On not supported"); |
| return -ENOTSUP; |
| } |
| |
| if (config->operation & SPI_TRANSFER_LSB) { |
| LOG_ERR("LSB first not supported"); |
| return -ENOTSUP; |
| } |
| |
| if (config->operation & (SPI_MODE_CPOL | SPI_MODE_CPHA)) { |
| if (config->operation & (SPI_MODE_CPOL && SPI_MODE_CPHA)) { |
| mspicfg.eSpiMode = AM_HAL_MSPI_SPI_MODE_3; |
| } else if (config->operation & SPI_MODE_CPOL) { |
| mspicfg.eSpiMode = AM_HAL_MSPI_SPI_MODE_2; |
| } else if (config->operation & SPI_MODE_CPHA) { |
| mspicfg.eSpiMode = AM_HAL_MSPI_SPI_MODE_1; |
| } else { |
| mspicfg.eSpiMode = AM_HAL_MSPI_SPI_MODE_0; |
| } |
| } |
| |
| mspicfg.eClockFreq = mspi_set_freq(config->frequency); |
| if (mspicfg.eClockFreq == AM_HAL_MSPI_CLK_INVALID) { |
| return -ENOTSUP; |
| } |
| |
| mspicfg.eDeviceConfig = AM_HAL_MSPI_FLASH_SERIAL_CE0; |
| |
| ret = am_hal_mspi_disable(data->mspiHandle); |
| if (ret) { |
| return ret; |
| } |
| |
| ret = am_hal_mspi_device_configure(data->mspiHandle, &mspicfg); |
| if (ret) { |
| return ret; |
| } |
| |
| ret = am_hal_mspi_enable(data->mspiHandle); |
| |
| |
| return ret; |
| } |
| |
| static int mspi_ambiq_xfer(const struct device *dev, const struct spi_config *config) |
| { |
| struct mspi_ambiq_data *data = dev->data; |
| struct spi_context *ctx = &data->ctx; |
| int ret; |
| |
| am_hal_mspi_pio_transfer_t trans = {0}; |
| |
| trans.bSendAddr = true; |
| trans.bSendInstr = true; |
| trans.ui16DeviceInstr = *ctx->tx_buf; |
| spi_context_update_tx(ctx, 1, 1); |
| trans.ui32DeviceAddr = *ctx->tx_buf; |
| |
| if (ctx->rx_buf != NULL) { |
| spi_context_update_rx(ctx, 1, ctx->rx_len); |
| trans.eDirection = AM_HAL_MSPI_RX; |
| trans.pui32Buffer = (uint32_t *)ctx->rx_buf; |
| trans.ui32NumBytes = ctx->rx_len; |
| |
| } else if (ctx->tx_buf != NULL) { |
| spi_context_update_tx(ctx, 1, 1); |
| trans.eDirection = AM_HAL_MSPI_TX; |
| trans.pui32Buffer = (uint32_t *)ctx->tx_buf; |
| trans.ui32NumBytes = ctx->tx_len; |
| } |
| |
| ret = am_hal_mspi_blocking_transfer(data->mspiHandle, &trans, MSPI_TIMEOUT_US); |
| |
| spi_context_complete(ctx, dev, 0); |
| |
| return ret; |
| } |
| |
| static int mspi_ambiq_transceive(const struct device *dev, const struct spi_config *config, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs) |
| { |
| struct mspi_ambiq_data *data = dev->data; |
| |
| int ret = mspi_config(dev, config); |
| |
| if (ret) { |
| return ret; |
| } |
| |
| if (!tx_bufs && !rx_bufs) { |
| return 0; |
| } |
| |
| spi_context_buffers_setup(&data->ctx, tx_bufs, rx_bufs, 1); |
| |
| ret = mspi_ambiq_xfer(dev, config); |
| |
| return ret; |
| } |
| |
| static int mspi_ambiq_release(const struct device *dev, const struct spi_config *config) |
| { |
| const struct mspi_ambiq_config *cfg = dev->config; |
| |
| if (sys_read32(cfg->base) & MSPI_BUSY) { |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| |
| static const struct spi_driver_api mspi_ambiq_driver_api = { |
| .transceive = mspi_ambiq_transceive, |
| .release = mspi_ambiq_release, |
| }; |
| |
| static int mspi_ambiq_init(const struct device *dev) |
| { |
| struct mspi_ambiq_data *data = dev->data; |
| const struct mspi_ambiq_config *cfg = dev->config; |
| am_hal_mspi_config_t mspiCfg = {0}; |
| |
| mspiCfg.pTCB = NULL; |
| |
| int ret = am_hal_mspi_initialize((cfg->base - REG_MSPI_BASEADDR) / (cfg->size * 4), |
| &data->mspiHandle); |
| if (ret) { |
| return ret; |
| } |
| |
| ret = cfg->pwr_func(); |
| |
| ret = am_hal_mspi_configure(data->mspiHandle, &mspiCfg); |
| if (ret) { |
| return ret; |
| } |
| |
| ret = pinctrl_apply_state(cfg->pcfg, PINCTRL_STATE_DEFAULT); |
| |
| return ret; |
| } |
| |
| #define AMBIQ_MSPI_DEFINE(n) \ |
| PINCTRL_DT_INST_DEFINE(n); \ |
| static int pwr_on_ambiq_mspi_##n(void) \ |
| { \ |
| uint32_t addr = DT_REG_ADDR(DT_INST_PHANDLE(n, ambiq_pwrcfg)) + \ |
| DT_INST_PHA(n, ambiq_pwrcfg, offset); \ |
| sys_write32((sys_read32(addr) | DT_INST_PHA(n, ambiq_pwrcfg, mask)), addr); \ |
| k_busy_wait(PWRCTRL_MAX_WAIT_US); \ |
| return 0; \ |
| } \ |
| static struct mspi_ambiq_data mspi_ambiq_data##n = { \ |
| SPI_CONTEXT_INIT_SYNC(mspi_ambiq_data##n, ctx)}; \ |
| static const struct mspi_ambiq_config mspi_ambiq_config##n = { \ |
| .base = DT_INST_REG_ADDR(n), \ |
| .size = DT_INST_REG_SIZE(n), \ |
| .pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \ |
| .pwr_func = pwr_on_ambiq_mspi_##n, \ |
| }; \ |
| DEVICE_DT_INST_DEFINE(n, mspi_ambiq_init, NULL, &mspi_ambiq_data##n, \ |
| &mspi_ambiq_config##n, POST_KERNEL, CONFIG_SPI_INIT_PRIORITY, \ |
| &mspi_ambiq_driver_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(AMBIQ_MSPI_DEFINE) |