| /* |
| * Copyright (c) 2022 Intel Corporation |
| * |
| * Intel I/O Controller Hub (ICH) later renamed to Intel Platform Controller |
| * Hub (PCH) SMBus driver. |
| * |
| * PCH provides SMBus 2.0 - compliant Host Controller. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #ifndef ZEPHYR_DRIVERS_SMBUS_PCH_H_ |
| #define ZEPHYR_DRIVERS_SMBUS_PCH_H_ |
| |
| /* PCI Configuration Space registers */ |
| |
| /* Host Configuration (HCFG) - Offset 40h, 8 bits */ |
| #define PCH_SMBUS_HCFG 0x10 |
| #define PCH_SMBUS_HCFG_HST_EN BIT(0) /* Enable SMBus controller */ |
| |
| /* PCH SMBus I/O and Memory Mapped registers */ |
| |
| /* Host Status Register Address (HSTS) */ |
| #define PCH_SMBUS_HSTS 0x00 |
| #define PCH_SMBUS_HSTS_HOST_BUSY BIT(0) /* Host Busy */ |
| #define PCH_SMBUS_HSTS_INTERRUPT BIT(1) /* Interrupt */ |
| #define PCH_SMBUS_HSTS_DEV_ERROR BIT(2) /* Device Error */ |
| #define PCH_SMBUS_HSTS_BUS_ERROR BIT(3) /* Bus Error */ |
| #define PCH_SMBUS_HSTS_FAILED BIT(4) /* Failed */ |
| #define PCH_SMBUS_HSTS_SMB_ALERT BIT(5) /* SMB Alert */ |
| #define PCH_SMBUS_HSTS_INUSE BIT(6) /* In Use */ |
| #define PCH_SMBUS_HSTS_BYTE_DONE BIT(7) /* Byte Done */ |
| |
| #define PCH_SMBUS_HSTS_ERROR (PCH_SMBUS_HSTS_DEV_ERROR | \ |
| PCH_SMBUS_HSTS_BUS_ERROR | \ |
| PCH_SMBUS_HSTS_FAILED) |
| |
| /* Host Control Register (HCTL) */ |
| #define PCH_SMBUS_HCTL 0x02 /* Host Control */ |
| #define PCH_SMBUS_HCTL_INTR_EN BIT(0) /* INT Enable */ |
| #define PCH_SMBUS_HCTL_KILL BIT(1) /* Kill current trans */ |
| #define PCH_SMBUS_HCTL_CMD GENMASK(4, 2) /* Command */ |
| /* SMBUS Commands */ |
| #define PCH_SMBUS_HCTL_CMD_QUICK (0 << 2) /* Quick cmd*/ |
| #define PCH_SMBUS_HCTL_CMD_BYTE (1 << 2) /* Byte cmd */ |
| #define PCH_SMBUS_HCTL_CMD_BYTE_DATA (2 << 2) /* Byte Data cmd */ |
| #define PCH_SMBUS_HCTL_CMD_WORD_DATA (3 << 2) /* Word Data cmd */ |
| #define PCH_SMBUS_HCTL_CMD_PROC_CALL (4 << 2) /* Process Call cmd */ |
| #define PCH_SMBUS_HCTL_CMD_BLOCK (5 << 2) /* Block cmd */ |
| #define PCH_SMBUS_HCTL_CMD_I2C_READ (6 << 2) /* I2C Read cmd */ |
| #define PCH_SMBUS_HCTL_CMD_BLOCK_PROC (7 << 2) /* Block Process cmd */ |
| |
| #define PCH_SMBUS_HCTL_CMD_SET(cmd) (cmd << 2) |
| |
| #define PCH_SMBUS_HCTL_CMD_GET(val) (val & PCH_SMBUS_HCTL_CMD) |
| |
| #define PCH_SMBUS_HCTL_LAST_BYTE BIT(5) /* Last byte block op */ |
| #define PCH_SMBUS_HCTL_START BIT(6) /* Start SMBUS cmd */ |
| #define PCH_SMBUS_HCTL_PEC_EN BIT(7) /* Enable PEC */ |
| |
| /* Host Command Register (HCMD) */ |
| #define PCH_SMBUS_HCMD 0x03 |
| |
| /* Transmit Slave Address Register (TSA) */ |
| #define PCH_SMBUS_TSA 0x04 |
| #define PCH_SMBUS_TSA_RW BIT(0) /* Direction */ |
| #define PCH_SMBUS_TSA_ADDR_MASK GENMASK(7, 1) /* Address mask */ |
| |
| /* Set 7-bit address */ |
| #define PCH_SMBUS_TSA_ADDR_SET(addr) (((addr) & BIT_MASK(7)) << 1) |
| |
| /* Get Peripheral address from register value */ |
| #define PCH_SMBUS_TSA_ADDR_GET(reg) ((reg >> 1) & BIT_MASK(7)) |
| |
| /* Data 0 Register (HD0) */ |
| #define PCH_SMBUS_HD0 0x05 /* Data 0 / Count */ |
| |
| /* Data 1 Register (HD1) */ |
| #define PCH_SMBUS_HD1 0x06 /* Data 1 */ |
| |
| /* Host Block Data (HBD) */ |
| #define PCH_SMBUS_HBD 0x07 /* Host block data */ |
| |
| /* Packet Error Check Data Register (PEC) */ |
| #define PCH_SMBUS_PEC 0x08 /* PEC data */ |
| |
| /* Receive Slave Address Register (RSA) */ |
| #define PCH_SMBUS_RSA 0x09 /* Receive slave addr */ |
| |
| /* Slave Data Register (SD) (16 bits) */ |
| #define PCH_SMBUS_SD 0x0a /* Slave data */ |
| |
| /* Auxiliary Status (AUXS) */ |
| #define PCH_SMBUS_AUXS 0x0c /* Auxiliary Status */ |
| #define PCH_SMBUS_AUXS_CRC_ERROR BIT(0) /* CRC error */ |
| |
| /* Auxiliary Control (AUXC) */ |
| #define PCH_SMBUS_AUXC 0x0d /* Auxiliary Control */ |
| #define PCH_SMBUS_AUXC_AAC BIT(0) /* Auto append CRC */ |
| #define PCH_SMBUS_AUXC_EN_32BUF BIT(1) /* Enable 32-byte buf */ |
| |
| /* SMLink Pin Control Register (SMLC) */ |
| #define PCH_SMBUS_SMLC 0x0e /* SMLink pin control */ |
| |
| /* SMBus Pin control Register (SMBC) */ |
| #define PCH_SMBUS_SMBC 0x0f /* SMBus pin control */ |
| #define PCH_SMBUS_SMBC_CLK_CUR_STS BIT(0) /* SMBCLK pin status */ |
| #define PCH_SMBUS_SMBC_DATA_CUR_STS BIT(1) /* SMBDATA pin status */ |
| #define PCH_SMBUS_SMBC_CLK_CTL BIT(2) /* SMBCLK pin CTL */ |
| |
| /* Slave Status Register (SSTS) */ |
| #define PCH_SMBUS_SSTS 0x10 /* Slave Status */ |
| #define PCH_SMBUS_SSTS_HNS BIT(0) /* Host Notify Status */ |
| |
| /* Slave Command Register (SCMD) */ |
| #define PCH_SMBUS_SCMD 0x11 /* Slave Command */ |
| #define PCH_SMBUS_SCMD_HNI_EN BIT(0) /* Host Notify INT En */ |
| #define PCH_SMBUS_SCMD_HNW_EN BIT(1) /* Host Notify Wake */ |
| #define PCH_SMBUS_SCMD_SMBALERT_DIS BIT(2) /* Disable Smbalert */ |
| |
| /* Notify Device Address Register (NDA) */ |
| #define PCH_SMBUS_NDA 0x14 /* Notify Device addr */ |
| |
| /* Notify Data Low Byte Register (NDLB) */ |
| #define PCH_SMBUS_NDLB 0x16 /* Notify Data low */ |
| |
| /* Notify Data High Byte Register (NDHB) */ |
| #define PCH_SMBUS_NDHB 0x17 /* Notify Data high */ |
| |
| /* Debug helpers */ |
| |
| #if CONFIG_SMBUS_LOG_LEVEL >= LOG_LEVEL_DBG |
| /* Dump HSTS register using define to show calling function */ |
| #define pch_dump_register_hsts(reg) \ |
| LOG_DBG("HSTS: 0x%02x: %s%s%s%s%s%s%s%s", reg, \ |
| reg & PCH_SMBUS_HSTS_HOST_BUSY ? "[Host Busy] " : "", \ |
| reg & PCH_SMBUS_HSTS_INTERRUPT ? "[Interrupt] " : "", \ |
| reg & PCH_SMBUS_HSTS_DEV_ERROR ? "[Device Error] " : "",\ |
| reg & PCH_SMBUS_HSTS_BUS_ERROR ? "[Bus Error] " : "", \ |
| reg & PCH_SMBUS_HSTS_FAILED ? "[Failed] " : "", \ |
| reg & PCH_SMBUS_HSTS_SMB_ALERT ? "[SMBALERT] " : "", \ |
| reg & PCH_SMBUS_HSTS_BYTE_DONE ? "[Byte Done] " : "", \ |
| reg & PCH_SMBUS_HSTS_INUSE ? "[In USE] " : ""); |
| #else |
| #define pch_dump_register_hsts(reg) |
| #endif |
| |
| #endif /* ZEPHYR_DRIVERS_SMBUS_PCH_H_ */ |
