| /* |
| * Copyright (c) 2020, Jiri Kerestes |
| * |
| * Based on wdt_mcux_wdog32.c, which is: |
| * Copyright (c) 2019 Vestas Wind Systems A/S |
| * Copyright (c) 2018, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT nxp_lpc_wwdt |
| |
| #include <zephyr/drivers/watchdog.h> |
| #include <zephyr/irq.h> |
| #include <zephyr/sys_clock.h> |
| #include <fsl_wwdt.h> |
| #include <fsl_clock.h> |
| |
| #define LOG_LEVEL CONFIG_WDT_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(wdt_mcux_wwdt); |
| |
| #define MIN_TIMEOUT 0xFF |
| |
| struct mcux_wwdt_config { |
| WWDT_Type *base; |
| uint8_t clk_divider; |
| void (*irq_config_func)(const struct device *dev); |
| }; |
| |
| struct mcux_wwdt_data { |
| wdt_callback_t callback; |
| wwdt_config_t wwdt_config; |
| bool timeout_valid; |
| }; |
| |
| static int mcux_wwdt_setup(const struct device *dev, uint8_t options) |
| { |
| const struct mcux_wwdt_config *config = dev->config; |
| struct mcux_wwdt_data *data = dev->data; |
| WWDT_Type *base = config->base; |
| |
| if (!data->timeout_valid) { |
| LOG_ERR("No valid timeouts installed"); |
| return -EINVAL; |
| } |
| |
| WWDT_Init(base, &data->wwdt_config); |
| LOG_DBG("Setup the watchdog"); |
| |
| return 0; |
| } |
| |
| static int mcux_wwdt_disable(const struct device *dev) |
| { |
| const struct mcux_wwdt_config *config = dev->config; |
| struct mcux_wwdt_data *data = dev->data; |
| WWDT_Type *base = config->base; |
| |
| WWDT_Deinit(base); |
| data->timeout_valid = false; |
| LOG_DBG("Disabled the watchdog"); |
| |
| return 0; |
| } |
| |
| /* |
| * LPC55xxx WWDT has a fixed divide-by-4 clock prescaler. |
| * This prescaler is different from the clock divider specified in Device Tree. |
| */ |
| #define MSEC_TO_WWDT_TICKS(clock_freq, msec) \ |
| ((uint32_t)((clock_freq / MSEC_PER_SEC) * msec) / 4) |
| |
| static int mcux_wwdt_install_timeout(const struct device *dev, |
| const struct wdt_timeout_cfg *cfg) |
| { |
| struct mcux_wwdt_data *data = dev->data; |
| uint32_t clock_freq; |
| |
| if (data->timeout_valid) { |
| LOG_ERR("No more timeouts can be installed"); |
| return -ENOMEM; |
| } |
| |
| #if defined(CONFIG_SOC_MIMXRT685S_CM33) || defined(CONFIG_SOC_MIMXRT595S_CM33) \ |
| || defined(CONFIG_SOC_SERIES_MCXN) |
| clock_freq = CLOCK_GetWdtClkFreq(0); |
| #elif defined(CONFIG_SOC_SERIES_RW6XX) |
| clock_freq = CLOCK_GetWdtClkFreq(); |
| #else |
| const struct mcux_wwdt_config *config = dev->config; |
| |
| CLOCK_SetClkDiv(kCLOCK_DivWdtClk, config->clk_divider, true); |
| clock_freq = CLOCK_GetWdtClkFreq(); |
| #endif |
| |
| WWDT_GetDefaultConfig(&data->wwdt_config); |
| |
| data->wwdt_config.clockFreq_Hz = clock_freq; |
| |
| data->wwdt_config.timeoutValue = |
| MSEC_TO_WWDT_TICKS(clock_freq, cfg->window.max); |
| |
| if (cfg->window.min) { |
| data->wwdt_config.windowValue = |
| MSEC_TO_WWDT_TICKS(clock_freq, cfg->window.min); |
| } |
| |
| if ((data->wwdt_config.timeoutValue < MIN_TIMEOUT) || |
| ((data->wwdt_config.windowValue != 0xFFFFFFU) && |
| (data->wwdt_config.timeoutValue < |
| data->wwdt_config.windowValue))) { |
| return -EINVAL; |
| } |
| |
| if (cfg->flags & WDT_FLAG_RESET_SOC) { |
| data->wwdt_config.enableWatchdogReset = true; |
| LOG_DBG("Enabling SoC reset"); |
| } |
| |
| if (cfg->callback && (CONFIG_WDT_MCUX_WWDT_WARNING_INTERRUPT_CFG > 0)) { |
| data->callback = cfg->callback; |
| data->wwdt_config.warningValue = CONFIG_WDT_MCUX_WWDT_WARNING_INTERRUPT_CFG; |
| } else if (cfg->callback) { |
| return -ENOTSUP; |
| } |
| |
| |
| data->timeout_valid = true; |
| LOG_DBG("Installed timeout (timeoutValue = %d)", |
| data->wwdt_config.timeoutValue); |
| |
| return 0; |
| } |
| |
| static int mcux_wwdt_feed(const struct device *dev, int channel_id) |
| { |
| const struct mcux_wwdt_config *config = dev->config; |
| WWDT_Type *base = config->base; |
| |
| if (channel_id != 0) { |
| LOG_ERR("Invalid channel id"); |
| return -EINVAL; |
| } |
| |
| WWDT_Refresh(base); |
| LOG_DBG("Fed the watchdog"); |
| |
| return 0; |
| } |
| |
| static void mcux_wwdt_isr(const struct device *dev) |
| { |
| const struct mcux_wwdt_config *config = dev->config; |
| struct mcux_wwdt_data *data = dev->data; |
| WWDT_Type *base = config->base; |
| uint32_t flags; |
| |
| flags = WWDT_GetStatusFlags(base); |
| WWDT_ClearStatusFlags(base, flags); |
| |
| if (data->callback) { |
| data->callback(dev, 0); |
| } |
| } |
| |
| static int mcux_wwdt_init(const struct device *dev) |
| { |
| const struct mcux_wwdt_config *config = dev->config; |
| |
| config->irq_config_func(dev); |
| |
| return 0; |
| } |
| |
| static const struct wdt_driver_api mcux_wwdt_api = { |
| .setup = mcux_wwdt_setup, |
| .disable = mcux_wwdt_disable, |
| .install_timeout = mcux_wwdt_install_timeout, |
| .feed = mcux_wwdt_feed, |
| }; |
| |
| static void mcux_wwdt_config_func_0(const struct device *dev); |
| |
| static const struct mcux_wwdt_config mcux_wwdt_config_0 = { |
| .base = (WWDT_Type *) DT_INST_REG_ADDR(0), |
| .clk_divider = |
| DT_INST_PROP(0, clk_divider), |
| .irq_config_func = mcux_wwdt_config_func_0, |
| }; |
| |
| static struct mcux_wwdt_data mcux_wwdt_data_0; |
| |
| DEVICE_DT_INST_DEFINE(0, &mcux_wwdt_init, |
| NULL, &mcux_wwdt_data_0, |
| &mcux_wwdt_config_0, POST_KERNEL, |
| CONFIG_KERNEL_INIT_PRIORITY_DEVICE, |
| &mcux_wwdt_api); |
| |
| static void mcux_wwdt_config_func_0(const struct device *dev) |
| { |
| IRQ_CONNECT(DT_INST_IRQN(0), |
| DT_INST_IRQ(0, priority), |
| mcux_wwdt_isr, DEVICE_DT_INST_GET(0), 0); |
| |
| irq_enable(DT_INST_IRQN(0)); |
| } |