blob: 88d4d7670172083c2e5ca16b63e4cd10cb005cfa [file] [log] [blame]
/*
* Copyright (c) 2018 Nordic Semiconductor ASA
* Copyright (c) 2017 Shawn Nock <shawn@monadnock.ca>
* Copyright (c) 2017 Linaro Limited
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nordic/nrf52810_qfaa.dtsi>
/ {
model = "Nordic PCA10040 Dev Kit";
compatible = "nordic,pca10040-dk", "nordic,nrf52810-qfaa",
"nordic,nrf52810";
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
};
leds {
compatible = "gpio-leds";
led0: led_0 {
gpios = <&gpio0 17 GPIO_INT_ACTIVE_LOW>;
label = "Green LED 0";
};
led1: led_1 {
gpios = <&gpio0 18 GPIO_INT_ACTIVE_LOW>;
label = "Green LED 1";
};
led2: led_2 {
gpios = <&gpio0 19 GPIO_INT_ACTIVE_LOW>;
label = "Green LED 2";
};
led3: led_3 {
gpios = <&gpio0 20 GPIO_INT_ACTIVE_LOW>;
label = "Green LED 3";
};
};
gpio_keys {
compatible = "gpio-keys";
button0: button_0 {
label = "Push button switch 0";
gpios = <&gpio0 13 GPIO_PUD_PULL_UP>;
};
button1: button_1 {
label = "Push button switch 1";
gpios = <&gpio0 14 GPIO_PUD_PULL_UP>;
};
button2: button_2 {
label = "Push button switch 2";
gpios = <&gpio0 15 GPIO_PUD_PULL_UP>;
};
button3: button_3 {
label = "Push button switch 3";
gpios = <&gpio0 16 GPIO_PUD_PULL_UP>;
};
};
/* These aliases are provided for compatibility with samples */
aliases {
led0 = &led0;
led1 = &led1;
led2 = &led2;
led3 = &led3;
sw0 = &button0;
sw1 = &button1;
sw2 = &button2;
sw3 = &button3;
};
};
&adc {
status = "ok";
};
&gpiote {
status ="ok";
};
&gpio0 {
status ="ok";
};
&uart0 {
compatible = "nordic,nrf-uarte";
status = "ok";
current-speed = <115200>;
tx-pin = <6>;
rx-pin = <8>;
rts-pin = <5>;
cts-pin = <7>;
};
&i2c0 {
status = "ok";
sda-pin = <26>;
scl-pin = <27>;
};
&spi0 {
status = "ok";
sck-pin = <29>;
mosi-pin = <31>;
miso-pin = <30>;
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x00000000 0xc000>;
};
slot0_partition: partition@c000 {
label = "image-0";
reg = <0x0000C000 0xd000>;
};
slot1_partition: partition@19000 {
label = "image-1";
reg = <0x00019000 0xd000>;
};
scratch_partition: partition@26000 {
label = "image-scratch";
reg = <0x00026000 0x3000>;
};
storage_partition: partition@29000 {
label = "storage";
reg = <0x00029000 0x00007000>;
};
};
};