| # ST Microelectronics LIS2DW12 3-axis accelerometer driver |
| # |
| # Copyright (c) 2019 STMicroelectronics |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| menuconfig LIS2DW12 |
| bool "LIS2DW12 I2C/SPI accelerometer sensor driver" |
| depends on (I2C && HAS_DTS_I2C) || (SPI && HAS_DTS_SPI) |
| help |
| Enable driver for LIS2DW12 accelerometer sensor driver |
| |
| if LIS2DW12 |
| |
| choice LIS2DW12_TRIGGER_MODE |
| prompt "Trigger mode" |
| help |
| Specify the type of triggering to be used by the driver. |
| |
| config LIS2DW12_TRIGGER_NONE |
| bool "No trigger" |
| |
| config LIS2DW12_TRIGGER_GLOBAL_THREAD |
| bool "Use global thread" |
| depends on GPIO |
| select LIS2DW12_TRIGGER |
| |
| config LIS2DW12_TRIGGER_OWN_THREAD |
| bool "Use own thread" |
| depends on GPIO |
| select LIS2DW12_TRIGGER |
| |
| endchoice |
| |
| config LIS2DW12_TRIGGER |
| bool |
| |
| if LIS2DW12_TRIGGER |
| |
| config LIS2DW12_THREAD_PRIORITY |
| int "Thread priority" |
| depends on LIS2DW12_TRIGGER_OWN_THREAD |
| default 10 |
| help |
| Priority of thread used by the driver to handle interrupts. |
| |
| config LIS2DW12_THREAD_STACK_SIZE |
| int "Thread stack size" |
| depends on LIS2DW12_TRIGGER_OWN_THREAD |
| default 1024 |
| help |
| Stack size of thread used by the driver to handle interrupts. |
| |
| choice |
| prompt "Sensor INT pin number" |
| default LIS2DW12_INT_PIN_1 |
| help |
| The number of LIS2DW12 int pin used to generate interrupt to cpu. |
| Supported values are int1 or int2 |
| |
| config LIS2DW12_INT_PIN_1 |
| bool "int1" |
| |
| config LIS2DW12_INT_PIN_2 |
| bool "int2" |
| endchoice |
| |
| endif # LIS2DW12_TRIGGER |
| |
| choice |
| prompt "Accelerometer Full-scale range setting" |
| default LIS2DW12_ACCEL_RANGE_RUNTIME |
| |
| config LIS2DW12_ACCEL_RANGE_RUNTIME |
| bool "Set at runtime (Default 2G)" |
| |
| config LIS2DW12_ACCEL_RANGE_2G |
| bool "2G" |
| |
| config LIS2DW12_ACCEL_RANGE_4G |
| bool "4G" |
| |
| config LIS2DW12_ACCEL_RANGE_8G |
| bool "8G" |
| |
| config LIS2DW12_ACCEL_RANGE_16G |
| bool "16G" |
| endchoice |
| |
| choice |
| prompt "Accelerometer sampling frequency (ODR)" |
| default LIS2DW12_ODR_RUNTIME |
| |
| config LIS2DW12_ODR_RUNTIME |
| bool "Set at runtime (Default 100 Hz)" |
| |
| config LIS2DW12_ODR_1_6 |
| bool "1.6 Hz" |
| |
| config LIS2DW12_ODR_12_5 |
| bool "12.5 Hz" |
| |
| config LIS2DW12_ODR_25 |
| bool "25 Hz" |
| |
| config LIS2DW12_ODR_50 |
| bool "50 Hz" |
| |
| config LIS2DW12_ODR_100 |
| bool "100 Hz" |
| |
| config LIS2DW12_ODR_200 |
| bool "200 Hz" |
| |
| config LIS2DW12_ODR_400 |
| bool "400 Hz" |
| |
| config LIS2DW12_ODR_800 |
| bool "800 Hz" |
| |
| config LIS2DW12_ODR_1600 |
| bool "1600 Hz" |
| |
| endchoice |
| |
| config LIS2DW12_POWER_MODE |
| int "Sensor Power Modes" |
| range 0 4 |
| default 0 |
| help |
| Specify the sensor power mode |
| 0: Low Power M1 |
| 1: Low Power M2 |
| 2: Low Power M3 |
| 3: Low Power M4 |
| 4: High Performance |
| |
| endif # LIS2DW12 |