| /* |
| * Copyright (c) 2017 Intel Corporation. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/interrupt-controller/intel-ioapic.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/i2c/i2c.h> |
| |
| / { |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "intel,quark"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arc"; |
| reg = <1>; |
| }; |
| |
| intc: ioapic@fec00000 { |
| compatible = "intel,ioapic"; |
| reg = <0xfec00000 0x100000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| }; |
| |
| flash0: flash@40010000 { |
| compatible = "soc-nv-flash"; |
| reg = <0x40010000 DT_FLASH_SIZE>; |
| }; |
| |
| flash1: flash@40030000 { |
| compatible = "soc-nv-flash"; |
| reg = <0x40030000 DT_FLASH_SIZE>; |
| }; |
| |
| sram0: memory@a8007000 { |
| device_type = "memory"; |
| compatible = "mmio-sram"; |
| reg = <0xa8007000 DT_SRAM_SIZE>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges; |
| |
| rtc: rtc@b0000400 { |
| compatible = "intel,qmsi-rtc"; |
| reg = <0xb0000400 0x400>; |
| clock-frequency = <32768>; |
| interrupts = <11 IRQ_TYPE_EDGE_RISING 2>; |
| interrupt-parent = <&intc>; |
| label = "RTC_0"; |
| }; |
| |
| uart0: uart@b0002000 { |
| compatible = "intel,qmsi-uart"; |
| reg = <0xb0002000 0x400>; |
| label = "UART_0"; |
| interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "disabled"; |
| }; |
| |
| uart1: uart@b0002400 { |
| compatible = "intel,qmsi-uart"; |
| reg = <0xb0002400 0x400>; |
| label = "UART_1"; |
| interrupts = <6 IRQ_TYPE_LEVEL_HIGH 3>; |
| interrupt-parent = <&intc>; |
| |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@b0000c00 { |
| compatible = "intel,qmsi-gpio"; |
| reg = <0xb0000c00 0x400>; |
| interrupts = <8 IRQ_TYPE_LEVEL_HIGH 2>; |
| interrupt-parent = <&intc>; |
| label = "GPIO_0"; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpio1: gpio@b0800b00 { |
| compatible = "intel,qmsi-gpio"; |
| reg = <0xb0800b00 0x400>; |
| interrupts = <31 IRQ_TYPE_LEVEL_HIGH 2>; |
| interrupt-parent = <&intc>; |
| label = "GPIO_1"; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| usb_cdc: virtualcom { |
| compatible = "intel,qmsi-usb"; |
| label = "CDC_ACM_0"; |
| }; |
| |
| i2c0: i2c@b0002800 { |
| compatible = "intel,qmsi-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb0002800 0x400>; |
| interrupts = <0 IRQ_TYPE_LEVEL_HIGH 2>; |
| interrupt-parent = <&intc>; |
| label = "I2C_0"; |
| |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@b0002c00 { |
| compatible = "intel,qmsi-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb0002c00 0x400>; |
| interrupts = <1 IRQ_TYPE_LEVEL_HIGH 2>; |
| interrupt-parent = <&intc>; |
| label = "I2C_1"; |
| |
| status = "disabled"; |
| }; |
| |
| spi0: spi@b0001000 { |
| compatible = "snps,designware-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb0001000 0x400>; |
| interrupts = <2 IRQ_TYPE_LEVEL_HIGH 2>; |
| interrupt-parent = <&intc>; |
| label = "SPI_0"; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@b0001400 { |
| compatible = "snps,designware-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb0001400 0x400>; |
| interrupts = <3 IRQ_TYPE_LEVEL_HIGH 2>; |
| interrupt-parent = <&intc>; |
| label = "SPI_1"; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@b0001800 { |
| compatible = "snps,designware-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xb0001800 0x400>; |
| interrupts = <4 IRQ_TYPE_LEVEL_HIGH 2>; |
| interrupt-parent = <&intc>; |
| label = "SPI_2"; |
| status = "disabled"; |
| }; |
| |
| wdog0: watchdog@b0000000 { |
| compatible = "intel,qmsi-watchdog"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg = <0xb0000000 0x400>; |
| interrupts = <12 IRQ_TYPE_EDGE_RISING 2>; |
| interrupt-parent = <&intc>; |
| |
| label = "WATCHDOG_0"; |
| |
| }; |
| }; |
| }; |