| .. zephyr:board:: weact_esp32s3_mini |
| |
| Overview |
| ******** |
| |
| The WeAct Studio ESP32-S3-MINI is a compact development board featuring the ESP32-S3-MINI-1-N4R2 |
| module with integrated 4MB flash and 2MB PSRAM. This board provides complete Wi-Fi and Bluetooth |
| Low Energy functionality with an onboard RGB WS2812 LED and BOOT button. For more information, |
| check `WeAct Studio ESP32-S3-MINI`_. |
| |
| Hardware |
| ******** |
| |
| |
| WeAct Studio ESP32-S3-MINI includes the following features: |
| |
| - 4MB integrated Flash memory |
| - 2MB integrated PSRAM |
| - Onboard RGB WS2812 LED (GPIO48) |
| - BOOT button (GPIO0) |
| - USB Type-C connector |
| |
| .. include:: ../../../espressif/common/soc-esp32s3-features.rst |
| :start-after: espressif-soc-esp32s3-features |
| |
| Supported Features |
| ================== |
| |
| .. zephyr:board-supported-hw:: |
| |
| System Requirements |
| ******************* |
| |
| .. include:: ../../../espressif/common/system-requirements.rst |
| :start-after: espressif-system-requirements |
| |
| Programming and Debugging |
| ************************* |
| |
| .. zephyr:board-supported-runners:: |
| |
| .. include:: ../../../espressif/common/building-flashing.rst |
| :start-after: espressif-building-flashing |
| |
| .. include:: ../../../espressif/common/board-variants.rst |
| :start-after: espressif-board-variants |
| |
| Debugging |
| ========= |
| |
| .. include:: ../../../espressif/common/openocd-debugging.rst |
| :start-after: espressif-openocd-debugging |
| |
| References |
| ********** |
| |
| .. target-notes:: |
| |
| .. _`WeAct Studio ESP32-S3-MINI`: https://github.com/WeActStudio/WeActStudio.ESP32S3-MINI/ |
