doc/services/portability/posix.rst

.. _posix_support:

POSIX Support
#############

The Portable Operating System Interface (POSIX) is a family of standards
specified by the IEEE Computer Society for maintaining compatibility between
operating systems. Zephyr implements a subset of the embedded profiles PSE51
and PSE52, and BSD Sockets API.

With the POSIX support available in Zephyr, an existing POSIX compliant
application can be ported to run on the Zephyr kernel, and therefore leverage
Zephyr features and functionality. Additionally, a library designed for use with
POSIX threading compatible operating systems can be ported to Zephyr kernel
based applications with minimal or no changes.

..  figure:: posix.svg
    :align: center
    :alt: POSIX Support in Zephyr

    POSIX support in Zephyr

The POSIX API subset is an increasingly popular OSAL (operating system
abstraction layer) for IoT and embedded applications, as can be seen in
Zephyr, AWS:FreeRTOS, TI-RTOS, and NuttX.

Benefits of POSIX support in Zephyr include:

- Offering a familiar API to non-embedded programmers, especially from Linux
- Enabling reuse (portability) of existing libraries based on POSIX APIs
- Providing an efficient API subset appropriate for small (MCU) embedded systems


System Overview
===============

Units of Functionality
++++++++++++++++++++++

The system profile is defined in terms of component profiles that specify Units
of Functionality that can be combined to realize the application platform. A Unit
of Functionality is a defined set of services which can be implemented. If
implemented, the standard prescribes that all services in the Unit must
be implemented.

A Minimal Realtime System Profile implementation must support the
following Units of Functionality as defined in IEEE Std. 1003.1 (also referred to
as POSIX.1-2017).


.. csv-table:: Units of Functionality
   :header: Requirements, Supported, Remarks
   :widths: 50,10,60


    POSIX_C_LANG_JUMP,
    POSIX_C_LANG_SUPPORT,yes
    POSIX_DEVICE_IO,
    POSIX_FILE_LOCKING,
    POSIX_SIGNALS,
    POSIX_SINGLE_PROCESS,
    POSIX_THREADS_BASE,yes
    XSI_THREAD_MUTEX_EXT,yes
    XSI_THREADS_EXT,yes


Option Requirements
++++++++++++++++++++

An implementation supporting the Minimal Realtime System
Profile must support the POSIX.1 Option Requirements which are defined in the
standard. Options Requirements are used for further sub-profiling within the
units of functionality: they further define the functional behavior of the
system service (normally adding extra functionality). Depending on the profile
to which the POSIX implementation complies,parameters and/or the precise
functionality of certain services may differ.

The following list shows the option requirements that are implemented in
Zephyr.


.. csv-table:: Option Requirements
   :header: Requirements, Supported
   :widths: 50,10

    _POSIX_CLOCK_SELECTION,
    _POSIX_FSYNC,
    _POSIX_MEMLOCK,
    _POSIX_MEMLOCK_RANGE,
    _POSIX_MONOTONIC_CLOCK,
    _POSIX_NO_TRUNC,
    _POSIX_REALTIME_SIGNALS,
    _POSIX_SEMAPHORES,yes
    _POSIX_SHARED_MEMORY_OBJECTS,
    _POSIX_SYNCHRONIZED_IO,
    _POSIX_THREAD_ATTR_STACKADDR,
    _POSIX_THREAD_ATTR_STACKSIZE,
    _POSIX_THREAD_CPUTIME,
    _POSIX_THREAD_PRIO_INHERIT,yes
    _POSIX_THREAD_PRIO_PROTECT,
    _POSIX_THREAD_PRIORITY_SCHEDULING,yes
    _POSIX_THREAD_SPORADIC_SERVER,
    _POSIX_TIMEOUTS,
    _POSIX_TIMERS,
    _POSIX2_C_DEV,
    _POSIX2_SW_DEV,



Units of Functionality
======================

This section describes the Units of Functionality (fixed sets of interfaces)
which are implemented (partially or completely) in Zephyr. Please refer to the
standard for a full description of each listed interface.

POSIX_THREADS_BASE
+++++++++++++++++++

The basic assumption in this profile is that the system
consists of a single (implicit) process with multiple threads. Therefore, the
standard requires all basic thread services, except those related to
multiple processes.


.. csv-table:: POSIX_THREADS_BASE
   :header: API, Supported
   :widths: 50,10

    pthread_atfork(),
    pthread_attr_destroy(),yes
    pthread_attr_getdetachstate(),yes
    pthread_attr_getschedparam(),yes
    pthread_attr_init(),yes
    pthread_attr_setdetachstate(),yes
    pthread_attr_setschedparam(),yes
    pthread_cancel(),yes
    pthread_cleanup_pop(),
    pthread_cleanup_push(),
    pthread_cond_broadcast(),yes
    pthread_cond_destroy(),
    pthread_cond_init(),yes
    pthread_cond_signal(),yes
    pthread_cond_timedwait(),yes
    pthread_cond_wait(),yes
    pthread_condattr_destroy(),
    pthread_condattr_init(),
    pthread_create(),yes
    pthread_detach(),yes
    pthread_equal(),
    pthread_exit(),yes
    pthread_getspecific(),yes
    pthread_join(),yes
    pthread_key_create(),yes
    pthread_key_delete(),yes
    pthread_kill(),
    pthread_mutex_destroy(),yes
    pthread_mutex_init(),yes
    pthread_mutex_lock(),yes
    pthread_mutex_trylock(),yes
    pthread_mutex_unlock(),yes
    pthread_mutexattr_destroy(),
    pthread_mutexattr_init(),
    pthread_once(),yes
    pthread_self(),yes
    pthread_setcalcelstate(),
    pthread_setcanceltype(),
    pthread_setspecific(),yes
    pthread_sigmask(),
    pthread_testcancel(),



XSI_THREAD_EXT
++++++++++++++

The XSI_THREADS_EXT Unit of Functionality is required because it provides
functions to control a thread's stack. This is considered useful for any
real-time application.

This table lists service support status in Zephyr:

.. csv-table:: XSI_THREAD_EXT
   :header: API, Supported
   :widths: 50,10

    pthread_attr_getguardsize(),
    pthread_attr_getstack(),yes
    pthread_attr_setguardsize(),
    pthread_attr_setstack(),yes
    pthread_getconcurrency(),
    pthread_setconcurrency()


XSI_THREAD_MUTEX_EXT
++++++++++++++++++++

The XSI_THREAD_MUTEX_EXT Unit of Functionality is required because it has
options for controlling the behavior of mutexes under erroneous application use.


This table lists service support status in Zephyr:

.. csv-table:: XSI_THREAD_MUTEX_EXT
   :header: API, Supported
   :widths: 50,10

    pthread_mutexattr_gettype(),yes
    pthread_mutexattr_settype(),yes


POSIX_C_LANG_SUPPORT
++++++++++++++++++++

The POSIX_C_LANG_SUPPORT Unit of Functionality contains the general ISO C
Library.

This is implemented as part of the minimal C library available in Zephyr.


.. csv-table:: POSIX_C_LANG_SUPPORT
   :header: API, Supported
   :widths: 50,10

    abs(),yes
    asctime(),
    asctime_r(),
    atof(),
    atoi(),yes
    atol(),
    atoll(),
    bsearch(),yes
    calloc(),yes
    ctime(),
    ctime_r(),
    difftime(),
    div(),
    feclearexcept(),
    fegetenv(),
    fegetexceptflag(),
    fegetround(),
    feholdexcept(),
    feraiseexcept(),
    fesetenv(),
    fesetexceptflag(),
    fesetround(),
    fetestexcept(),
    feupdateenv(),
    free(),yes
    gmtime(),yes
    gmtime_r(),yes
    imaxabs(),
    imaxdiv(),
    isalnum(),yes
    isalpha(),yes
    isblank(),
    iscntrl(),
    isdigit(),yes
    isgraph(),yes
    islower(),
    isprint(),yes
    ispunct(),
    isspace(),yes
    isupper(),yes
    isxdigit(),yes
    labs(),yes
    ldiv(),
    llabs(),yes
    lldiv(),
    localeconv(),
    localtime(),yes
    localtime_r(),
    malloc(),yes
    memchr(),yes
    memcmp(),yes
    memcpy(),yes
    memmove(),yes
    memset(),yes
    mktime(),yes
    qsort(),
    rand(),yes
    rand_r(),
    realloc(),yes
    setlocale(),
    snprintf(),yes
    sprintf(),yes
    srand(),yes
    sscanf(),
    strcat(),yes
    strchr(),yes
    strcmp(),yes
    strcoll(),
    strcpy(),yes
    strcspn(),
    strerror(),yes
    strerror_r(),yes
    strftime(),
    strlen(),yes
    strncat(),yes
    strncmp(),yes
    strncpy(),yes
    strpbrk(),
    strrchr(),yes
    strspn(),
    strstr(),yes
    strtod(),
    strtof(),
    strtoimax(),
    strtok(),
    strtok_r(),yes
    strtol(),yes
    strtold(),
    strtoll(),yes
    strtoul(),yes
    strtoull(),yes
    strtoumax(),
    strxfrm(),
    time(),yes
    tolower(),yes
    toupper(),yes
    tzname(),
    tzset(),
    va_arg(),
    va_copy(),
    va_end(),
    va_start(),
    vsnprintf(),yes
    vsprintf(),yes
    vsscanf(),


POSIX_SINGLE_PROCESS
+++++++++++++++++++++

The POSIX_SINGLE_PROCESS Unit of Functionality contains services for single
process applications.

.. csv-table:: POSIX_SINGLE_PROCESS
   :header: API, Supported
   :widths: 50,10

    confstr(),
    environ,
    errno,
    getenv(),
    setenv(),
    sysconf(),
    uname(),
    unsetenv()


POSIX_SIGNALS
+++++++++++++

Signal services are a basic mechanism within POSIX-based systems and are
required for error and event handling.

.. csv-table:: POSIX_SIGNALS
   :header: API, Supported
   :widths: 50,10


    abort(),yes
    alarm(),
    kill(),
    pause(),
    raise(),
    sigaction(),
    igaddset(),
    sigdelset(),
    sigemptyset(),
    sigfillset(),
    igismember(),
    signal(),
    sigpending(),
    sigprocmask(),
    igsuspend(),
    sigwait()


POSIX_DEVICE_IO
+++++++++++++++

.. csv-table:: POSIX_DEVICE_IO
   :header: API, Supported
   :widths: 50,10

    flockfile(),
    ftrylockfile(),
    funlockfile(),
    getc_unlocked(),
    getchar_unlocked(),
    putc_unlocked(),
    putchar_unlocked()
    clearerr(),
    close(),
    fclose(),
    fdopen(),
    feof(),
    ferror(),
    fflush(),
    fgetc(),
    fgets(),
    fileno(),
    fopen(),
    fprintf(),yes
    fputc(),yes
    fputs(),yes
    fread(),
    freopen(),
    fscanf(),
    fwrite(),yes
    getc(),
    getchar(),
    gets(),
    open(),yes
    perror(),yes
    printf(),yes
    putc(),yes
    putchar(),
    puts(),yes
    read(),yes
    scanf(),
    setbuf(),
    etvbuf(),
    stderr,
    stdin,
    stdout,
    ungetc(),
    vfprintf(),yes
    vfscanf(),
    vprintf(),yes
    vscanf(),
    write(),