| /* |
| * Copyright (c) 2022 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <string.h> |
| |
| #include <zephyr/toolchain.h> |
| #include <zephyr/sys/__assert.h> |
| #include <zephyr/sys/slist.h> |
| |
| #include <zephyr/drivers/i3c.h> |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(i3c, CONFIG_I3C_LOG_LEVEL); |
| |
| void i3c_dump_msgs(const char *name, const struct i3c_msg *msgs, |
| uint8_t num_msgs, struct i3c_device_desc *target) |
| { |
| LOG_DBG("I3C msg: %s, addr=%x", name, target->dynamic_addr); |
| for (unsigned int i = 0; i < num_msgs; i++) { |
| const struct i3c_msg *msg = &msgs[i]; |
| |
| LOG_DBG(" %c len=%02x: ", |
| msg->flags & I3C_MSG_READ ? 'R' : 'W', msg->len); |
| if (!(msg->flags & I3C_MSG_READ)) { |
| LOG_HEXDUMP_DBG(msg->buf, msg->len, "contents:"); |
| } |
| } |
| } |
| |
| void i3c_addr_slots_set(struct i3c_addr_slots *slots, |
| uint8_t dev_addr, |
| enum i3c_addr_slot_status status) |
| { |
| int bitpos; |
| int idx; |
| |
| __ASSERT_NO_MSG(slots != NULL); |
| |
| if (dev_addr > I3C_MAX_ADDR) { |
| /* Invalid address. Do nothing. */ |
| return; |
| } |
| |
| bitpos = dev_addr * 2; |
| idx = bitpos / BITS_PER_LONG; |
| |
| slots->slots[idx] &= ~((unsigned long)I3C_ADDR_SLOT_STATUS_MASK << |
| (bitpos % BITS_PER_LONG)); |
| slots->slots[idx] |= status << (bitpos % BITS_PER_LONG); |
| } |
| |
| enum i3c_addr_slot_status |
| i3c_addr_slots_status(struct i3c_addr_slots *slots, |
| uint8_t dev_addr) |
| { |
| unsigned long status; |
| int bitpos; |
| int idx; |
| |
| __ASSERT_NO_MSG(slots != NULL); |
| |
| if (dev_addr > I3C_MAX_ADDR) { |
| /* Invalid address. |
| * Simply says it's reserved so it will not be |
| * used for anything. |
| */ |
| return I3C_ADDR_SLOT_STATUS_RSVD; |
| } |
| |
| bitpos = dev_addr * 2; |
| idx = bitpos / BITS_PER_LONG; |
| |
| status = slots->slots[idx] >> (bitpos % BITS_PER_LONG); |
| status &= I3C_ADDR_SLOT_STATUS_MASK; |
| |
| return status; |
| } |
| |
| |
| int i3c_addr_slots_init(struct i3c_addr_slots *slots, |
| const struct i3c_dev_list *dev_list) |
| { |
| int i, ret = 0; |
| struct i3c_device_desc *i3c_dev; |
| struct i3c_i2c_device_desc *i2c_dev; |
| |
| __ASSERT_NO_MSG(slots != NULL); |
| |
| (void)memset(slots, 0, sizeof(*slots)); |
| |
| for (i = 0; i <= 7; i++) { |
| /* Addresses 0 to 7 are reserved */ |
| i3c_addr_slots_set(slots, i, I3C_ADDR_SLOT_STATUS_RSVD); |
| |
| /* |
| * Addresses within a single bit error of broadcast address |
| * are also reserved. |
| */ |
| i3c_addr_slots_set(slots, I3C_BROADCAST_ADDR ^ BIT(i), |
| I3C_ADDR_SLOT_STATUS_RSVD); |
| |
| } |
| |
| /* The broadcast address is reserved */ |
| i3c_addr_slots_set(slots, I3C_BROADCAST_ADDR, |
| I3C_ADDR_SLOT_STATUS_RSVD); |
| |
| /* |
| * If there is a static address for the I3C devices, check |
| * if this address is free, and there is no other devices of |
| * the same (pre-assigned) address on the bus. |
| */ |
| for (i = 0; i < dev_list->num_i3c; i++) { |
| i3c_dev = &dev_list->i3c[i]; |
| if (i3c_dev->static_addr != 0U) { |
| if (i3c_addr_slots_is_free(slots, i3c_dev->static_addr)) { |
| /* |
| * Mark address slot as I3C device for now to |
| * detect address collisons. This marking may be |
| * released during address assignment. |
| */ |
| i3c_addr_slots_mark_i3c(slots, i3c_dev->static_addr); |
| } else { |
| /* Address slot is not free */ |
| ret = -EINVAL; |
| goto out; |
| } |
| } |
| } |
| |
| /* |
| * Mark all I2C addresses. |
| */ |
| for (i = 0; i < dev_list->num_i2c; i++) { |
| i2c_dev = &dev_list->i2c[i]; |
| if (i3c_addr_slots_is_free(slots, i2c_dev->addr)) { |
| i3c_addr_slots_mark_i2c(slots, i2c_dev->addr); |
| } else { |
| /* Address slot is not free */ |
| ret = -EINVAL; |
| goto out; |
| } |
| } |
| |
| out: |
| return ret; |
| } |
| |
| bool i3c_addr_slots_is_free(struct i3c_addr_slots *slots, |
| uint8_t dev_addr) |
| { |
| enum i3c_addr_slot_status status; |
| |
| __ASSERT_NO_MSG(slots != NULL); |
| |
| status = i3c_addr_slots_status(slots, dev_addr); |
| |
| return (status == I3C_ADDR_SLOT_STATUS_FREE); |
| } |
| |
| uint8_t i3c_addr_slots_next_free_find(struct i3c_addr_slots *slots) |
| { |
| uint8_t addr; |
| enum i3c_addr_slot_status status; |
| |
| /* Addresses 0 to 7 are reserved. So start at 8. */ |
| for (addr = 8; addr < I3C_MAX_ADDR; addr++) { |
| status = i3c_addr_slots_status(slots, addr); |
| if (status == I3C_ADDR_SLOT_STATUS_FREE) { |
| return addr; |
| } |
| } |
| |
| return 0; |
| } |
| |
| struct i3c_device_desc *i3c_dev_list_find(const struct i3c_dev_list *dev_list, |
| const struct i3c_device_id *id) |
| { |
| int i; |
| struct i3c_device_desc *ret = NULL; |
| |
| __ASSERT_NO_MSG(dev_list != NULL); |
| |
| for (i = 0; i < dev_list->num_i3c; i++) { |
| struct i3c_device_desc *desc = &dev_list->i3c[i]; |
| |
| if (desc->pid == id->pid) { |
| ret = desc; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| struct i3c_device_desc *i3c_dev_list_i3c_addr_find(const struct i3c_dev_list *dev_list, |
| uint8_t addr) |
| { |
| int i; |
| struct i3c_device_desc *ret = NULL; |
| |
| __ASSERT_NO_MSG(dev_list != NULL); |
| |
| for (i = 0; i < dev_list->num_i3c; i++) { |
| struct i3c_device_desc *desc = &dev_list->i3c[i]; |
| |
| if (desc->dynamic_addr == addr) { |
| ret = desc; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| struct i3c_i2c_device_desc *i3c_dev_list_i2c_addr_find(const struct i3c_dev_list *dev_list, |
| uint16_t addr) |
| { |
| int i; |
| struct i3c_i2c_device_desc *ret = NULL; |
| |
| __ASSERT_NO_MSG(dev_list != NULL); |
| |
| for (i = 0; i < dev_list->num_i2c; i++) { |
| struct i3c_i2c_device_desc *desc = &dev_list->i2c[i]; |
| |
| if (desc->addr == addr) { |
| ret = desc; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| int i3c_dev_list_daa_addr_helper(struct i3c_addr_slots *addr_slots, |
| const struct i3c_dev_list *dev_list, |
| uint64_t pid, bool must_match, |
| bool assigned_okay, |
| struct i3c_device_desc **target, |
| uint8_t *addr) |
| { |
| struct i3c_device_desc *desc; |
| const uint16_t vendor_id = (uint16_t)(pid >> 32); |
| const uint32_t part_no = (uint32_t)(pid & 0xFFFFFFFFU); |
| uint8_t dyn_addr = 0; |
| int ret = 0; |
| const struct i3c_device_id i3c_id = I3C_DEVICE_ID(pid); |
| |
| desc = i3c_dev_list_find(dev_list, &i3c_id); |
| if (must_match && (desc == NULL)) { |
| /* |
| * No device descriptor matching incoming PID and |
| * that we want an exact match. |
| */ |
| ret = -ENODEV; |
| |
| LOG_DBG("PID 0x%04x%08x is not in registered device list", |
| vendor_id, part_no); |
| |
| goto out; |
| } |
| |
| if (desc->dynamic_addr != 0U) { |
| if (assigned_okay) { |
| /* Return the already assigned address if desired so. */ |
| dyn_addr = desc->dynamic_addr; |
| goto out; |
| } else { |
| /* |
| * Bail If target already has an assigned address. |
| * This is probably due to having the same PIDs for multiple targets |
| * in the device tree. |
| */ |
| LOG_ERR("PID 0x%04x%08x already has " |
| "dynamic address (0x%02x) assigned", |
| vendor_id, part_no, desc->dynamic_addr); |
| ret = -EINVAL; |
| goto err; |
| } |
| } |
| |
| /* |
| * Use the desired dynamic address as the new dynamic address |
| * if the slot is free. |
| */ |
| if (desc->init_dynamic_addr != 0U) { |
| if (i3c_addr_slots_is_free(addr_slots, |
| desc->init_dynamic_addr)) { |
| dyn_addr = desc->init_dynamic_addr; |
| goto out; |
| } |
| } |
| |
| /* |
| * Find the next available address. |
| */ |
| dyn_addr = i3c_addr_slots_next_free_find(addr_slots); |
| |
| if (dyn_addr == 0U) { |
| /* No free addresses available */ |
| LOG_DBG("No more free addresses available."); |
| ret = -ENOSPC; |
| } |
| |
| out: |
| *addr = dyn_addr; |
| *target = desc; |
| |
| err: |
| return ret; |
| } |
| |
| int i3c_device_basic_info_get(struct i3c_device_desc *target) |
| { |
| int ret; |
| uint8_t tmp_bcr; |
| |
| struct i3c_ccc_getbcr bcr = {0}; |
| struct i3c_ccc_getdcr dcr = {0}; |
| struct i3c_ccc_mrl mrl = {0}; |
| struct i3c_ccc_mwl mwl = {0}; |
| |
| /* |
| * Since some CCC functions requires BCR to function |
| * correctly, we save the BCR here and update the BCR |
| * in the descriptor. If any following operations fails, |
| * we can restore the BCR. |
| */ |
| tmp_bcr = target->bcr; |
| |
| /* GETBCR */ |
| ret = i3c_ccc_do_getbcr(target, &bcr); |
| if (ret != 0) { |
| goto out; |
| } |
| |
| target->bcr = bcr.bcr; |
| |
| /* GETDCR */ |
| ret = i3c_ccc_do_getdcr(target, &dcr); |
| if (ret != 0) { |
| goto out; |
| } |
| |
| /* GETMRL */ |
| ret = i3c_ccc_do_getmrl(target, &mrl); |
| if (ret != 0) { |
| goto out; |
| } |
| |
| /* GETMWL */ |
| ret = i3c_ccc_do_getmwl(target, &mwl); |
| if (ret != 0) { |
| goto out; |
| } |
| |
| target->dcr = dcr.dcr; |
| target->data_length.mrl = mrl.len; |
| target->data_length.mwl = mwl.len; |
| target->data_length.max_ibi = mrl.ibi_len; |
| |
| out: |
| if (ret != 0) { |
| /* Restore BCR is any CCC fails. */ |
| target->bcr = tmp_bcr; |
| } |
| return ret; |
| } |
| |
| /** |
| * @brief Do SETDASA to set static address as dynamic address. |
| * |
| * @param dev Pointer to the device driver instance. |
| * @param[out] True if DAA is still needed. False if all registered |
| * devices have static addresses. |
| * |
| * @retval 0 if successful. |
| */ |
| static int i3c_bus_setdasa(const struct device *dev, |
| const struct i3c_dev_list *dev_list, |
| bool *need_daa) |
| { |
| int i, ret; |
| |
| *need_daa = false; |
| |
| /* Loop through the registered I3C devices */ |
| for (i = 0; i < dev_list->num_i3c; i++) { |
| struct i3c_device_desc *desc = &dev_list->i3c[i]; |
| |
| /* |
| * A device without static address => need to do |
| * dynamic address assignment. |
| */ |
| if (desc->static_addr == 0U) { |
| *need_daa = true; |
| continue; |
| } |
| |
| /* |
| * If there is a desired dynamic address and it is |
| * not the same as the static address, wait till |
| * ENTDAA to do address assignment as this is |
| * no longer SETDASA. |
| */ |
| if ((desc->init_dynamic_addr != 0U) && |
| (desc->init_dynamic_addr != desc->static_addr)) { |
| *need_daa = true; |
| continue; |
| } |
| |
| LOG_DBG("SETDASA for 0x%x", desc->static_addr); |
| |
| ret = i3c_ccc_do_setdasa(desc); |
| if (ret == 0) { |
| desc->dynamic_addr = desc->static_addr; |
| } else { |
| LOG_ERR("SETDASA error on address 0x%x (%d)", |
| desc->static_addr, ret); |
| continue; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int i3c_bus_init(const struct device *dev, const struct i3c_dev_list *dev_list) |
| { |
| int i, ret = 0; |
| bool need_daa = true; |
| struct i3c_ccc_events i3c_events; |
| |
| /* |
| * Reset all connected targets. Also reset dynamic |
| * addresses for all devices as we have no idea what |
| * dynamic addresses the connected devices have |
| * (e.g. assigned during previous power cycle). |
| * |
| * Note that we ignore error for both RSTACT and RSTDAA |
| * as there may not be any connected devices responding |
| * to these CCCs. |
| */ |
| if (i3c_ccc_do_rstact_all(dev, I3C_CCC_RSTACT_RESET_WHOLE_TARGET) != 0) { |
| /* |
| * Reset Whole Target support is not required so |
| * if there is any NACK, we want to at least reset |
| * the I3C peripheral of targets. |
| */ |
| LOG_DBG("Broadcast RSTACT (whole target) was NACK."); |
| |
| if (i3c_ccc_do_rstact_all(dev, I3C_CCC_RSTACT_PERIPHERAL_ONLY) != 0) { |
| LOG_DBG("Broadcast RSTACT (peripehral) was NACK."); |
| } |
| } |
| |
| if (i3c_ccc_do_rstdaa_all(dev) != 0) { |
| LOG_DBG("Broadcast RSTDAA was NACK."); |
| } |
| |
| /* |
| * Disable all events from targets to avoid them |
| * interfering with bus initialization, |
| * especially during DAA. |
| */ |
| i3c_events.events = I3C_CCC_EVT_ALL; |
| ret = i3c_ccc_do_events_all_set(dev, false, &i3c_events); |
| if (ret != 0) { |
| LOG_DBG("Broadcast DISEC was NACK."); |
| } |
| |
| /* |
| * Set static addresses as dynamic addresses. |
| */ |
| ret = i3c_bus_setdasa(dev, dev_list, &need_daa); |
| if (ret != 0) { |
| goto err_out; |
| } |
| |
| /* |
| * Perform Dynamic Address Assignment if needed. |
| */ |
| if (need_daa) { |
| ret = i3c_do_daa(dev); |
| if (ret != 0) { |
| /* |
| * Spec says to try once more |
| * if DAA fails the first time. |
| */ |
| ret = i3c_do_daa(dev); |
| if (ret != 0) { |
| /* |
| * Failure to finish dynamic address assignment |
| * is not the end of world... hopefully. |
| * Continue on so the devices already have |
| * addresses can still function. |
| */ |
| LOG_ERR("DAA was not successful."); |
| } |
| } |
| } |
| |
| /* |
| * Loop through the registered I3C devices to retrieve |
| * basic target information. |
| */ |
| for (i = 0; i < dev_list->num_i3c; i++) { |
| struct i3c_device_desc *desc = &dev_list->i3c[i]; |
| |
| if (desc->dynamic_addr == 0U) { |
| continue; |
| } |
| |
| ret = i3c_device_basic_info_get(desc); |
| if (ret != 0) { |
| LOG_ERR("Error getting basic device info for 0x%02x", |
| desc->static_addr); |
| } else { |
| LOG_DBG("Target 0x%02x, BCR 0x%02x, DCR 0x%02x, MRL %d, MWL %d, IBI %d", |
| desc->dynamic_addr, desc->bcr, desc->dcr, |
| desc->data_length.mrl, desc->data_length.mwl, |
| desc->data_length.max_ibi); |
| } |
| } |
| |
| /* |
| * Only re-enable Hot-Join from targets. |
| * Target interrupts will be enabled when IBI is enabled. |
| * And transferring controller role is not supported so not need to |
| * enable the event. |
| */ |
| i3c_events.events = I3C_CCC_EVT_HJ; |
| ret = i3c_ccc_do_events_all_set(dev, true, &i3c_events); |
| if (ret != 0) { |
| LOG_DBG("Broadcast ENEC was NACK."); |
| } |
| |
| err_out: |
| return ret; |
| } |