| /* |
| * Copyright (c) 2016 BayLibre, SAS |
| * Copyright (c) 2017 Linaro Ltd |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * I2C Driver for: STM32F0, STM32F3, STM32F7, STM32L0, STM32L4 and STM32WB |
| * |
| */ |
| |
| #include <clock_control/stm32_clock_control.h> |
| #include <drivers/clock_control.h> |
| #include <sys/util.h> |
| #include <kernel.h> |
| #include <soc.h> |
| #include <errno.h> |
| #include <drivers/i2c.h> |
| #include "i2c_ll_stm32.h" |
| |
| #define LOG_LEVEL CONFIG_I2C_LOG_LEVEL |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(i2c_ll_stm32_v2); |
| |
| #include "i2c-priv.h" |
| |
| static inline void msg_init(struct device *dev, struct i2c_msg *msg, |
| u8_t *next_msg_flags, u16_t slave, |
| uint32_t transfer) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| if (LL_I2C_IsEnabledReloadMode(i2c)) { |
| LL_I2C_SetTransferSize(i2c, msg->len); |
| } else { |
| if (I2C_ADDR_10_BITS & data->dev_config) { |
| LL_I2C_SetMasterAddressingMode(i2c, |
| LL_I2C_ADDRESSING_MODE_10BIT); |
| LL_I2C_SetSlaveAddr(i2c, (uint32_t) slave); |
| } else { |
| LL_I2C_SetMasterAddressingMode(i2c, |
| LL_I2C_ADDRESSING_MODE_7BIT); |
| LL_I2C_SetSlaveAddr(i2c, (uint32_t) slave << 1); |
| } |
| |
| if (!(msg->flags & I2C_MSG_STOP) && next_msg_flags && |
| !(*next_msg_flags & I2C_MSG_RESTART)) { |
| LL_I2C_EnableReloadMode(i2c); |
| } else { |
| LL_I2C_DisableReloadMode(i2c); |
| } |
| LL_I2C_DisableAutoEndMode(i2c); |
| LL_I2C_SetTransferRequest(i2c, transfer); |
| LL_I2C_SetTransferSize(i2c, msg->len); |
| |
| #if defined(CONFIG_I2C_SLAVE) |
| data->master_active = true; |
| #endif |
| LL_I2C_Enable(i2c); |
| |
| LL_I2C_GenerateStartCondition(i2c); |
| } |
| } |
| |
| #ifdef CONFIG_I2C_STM32_INTERRUPT |
| |
| static void stm32_i2c_disable_transfer_interrupts(struct device *dev) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| LL_I2C_DisableIT_TX(i2c); |
| LL_I2C_DisableIT_RX(i2c); |
| LL_I2C_DisableIT_STOP(i2c); |
| LL_I2C_DisableIT_NACK(i2c); |
| LL_I2C_DisableIT_TC(i2c); |
| LL_I2C_DisableIT_ERR(i2c); |
| } |
| |
| static void stm32_i2c_enable_transfer_interrupts(struct device *dev) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| LL_I2C_EnableIT_STOP(i2c); |
| LL_I2C_EnableIT_NACK(i2c); |
| LL_I2C_EnableIT_TC(i2c); |
| LL_I2C_EnableIT_ERR(i2c); |
| } |
| |
| static void stm32_i2c_master_mode_end(struct device *dev) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| stm32_i2c_disable_transfer_interrupts(dev); |
| |
| #if defined(CONFIG_I2C_SLAVE) |
| data->master_active = false; |
| if (!data->slave_attached) { |
| LL_I2C_Disable(i2c); |
| } |
| #else |
| LL_I2C_Disable(i2c); |
| #endif |
| k_sem_give(&data->device_sync_sem); |
| } |
| |
| #if defined(CONFIG_I2C_SLAVE) |
| static void stm32_i2c_slave_event(struct device *dev) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| const struct i2c_slave_callbacks *slave_cb = |
| data->slave_cfg->callbacks; |
| |
| if (LL_I2C_IsActiveFlag_TXIS(i2c)) { |
| u8_t val; |
| |
| slave_cb->read_processed(data->slave_cfg, &val); |
| LL_I2C_TransmitData8(i2c, val); |
| return; |
| } |
| |
| if (LL_I2C_IsActiveFlag_RXNE(i2c)) { |
| u8_t val = LL_I2C_ReceiveData8(i2c); |
| |
| if (slave_cb->write_received(data->slave_cfg, val)) { |
| LL_I2C_AcknowledgeNextData(i2c, LL_I2C_NACK); |
| } |
| return; |
| } |
| |
| if (LL_I2C_IsActiveFlag_NACK(i2c)) { |
| LL_I2C_ClearFlag_NACK(i2c); |
| } |
| |
| if (LL_I2C_IsActiveFlag_STOP(i2c)) { |
| stm32_i2c_disable_transfer_interrupts(dev); |
| |
| /* Flush remaining TX byte before clearing Stop Flag */ |
| LL_I2C_ClearFlag_TXE(i2c); |
| |
| LL_I2C_ClearFlag_STOP(i2c); |
| |
| slave_cb->stop(data->slave_cfg); |
| |
| /* Prepare to ACK next transmissions address byte */ |
| LL_I2C_AcknowledgeNextData(i2c, LL_I2C_ACK); |
| } |
| |
| if (LL_I2C_IsActiveFlag_ADDR(i2c)) { |
| u32_t dir; |
| |
| LL_I2C_ClearFlag_ADDR(i2c); |
| |
| dir = LL_I2C_GetTransferDirection(i2c); |
| if (dir == LL_I2C_DIRECTION_WRITE) { |
| slave_cb->write_requested(data->slave_cfg); |
| LL_I2C_EnableIT_RX(i2c); |
| } else { |
| u8_t val; |
| |
| slave_cb->read_requested(data->slave_cfg, &val); |
| LL_I2C_TransmitData8(i2c, val); |
| LL_I2C_EnableIT_TX(i2c); |
| } |
| |
| stm32_i2c_enable_transfer_interrupts(dev); |
| } |
| } |
| |
| /* Attach and start I2C as slave */ |
| int i2c_stm32_slave_register(struct device *dev, |
| struct i2c_slave_config *config) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| u32_t bitrate_cfg; |
| int ret; |
| |
| if (!config) { |
| return -EINVAL; |
| } |
| |
| if (data->slave_attached) { |
| return -EBUSY; |
| } |
| |
| if (data->master_active) { |
| return -EBUSY; |
| } |
| |
| bitrate_cfg = i2c_map_dt_bitrate(cfg->bitrate); |
| |
| ret = i2c_stm32_runtime_configure(dev, bitrate_cfg); |
| if (ret < 0) { |
| LOG_ERR("i2c: failure initializing"); |
| return ret; |
| } |
| |
| data->slave_cfg = config; |
| |
| LL_I2C_Enable(i2c); |
| |
| LL_I2C_SetOwnAddress1(i2c, config->address << 1, |
| LL_I2C_OWNADDRESS1_7BIT); |
| LL_I2C_EnableOwnAddress1(i2c); |
| |
| data->slave_attached = true; |
| |
| LOG_DBG("i2c: slave registered"); |
| |
| LL_I2C_EnableIT_ADDR(i2c); |
| |
| return 0; |
| } |
| |
| int i2c_stm32_slave_unregister(struct device *dev, |
| struct i2c_slave_config *config) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| if (!data->slave_attached) { |
| return -EINVAL; |
| } |
| |
| if (data->master_active) { |
| return -EBUSY; |
| } |
| |
| LL_I2C_DisableOwnAddress1(i2c); |
| |
| LL_I2C_DisableIT_ADDR(i2c); |
| stm32_i2c_disable_transfer_interrupts(dev); |
| |
| LL_I2C_ClearFlag_NACK(i2c); |
| LL_I2C_ClearFlag_STOP(i2c); |
| LL_I2C_ClearFlag_ADDR(i2c); |
| |
| LL_I2C_Disable(i2c); |
| |
| data->slave_attached = false; |
| |
| LOG_DBG("i2c: slave unregistered"); |
| |
| return 0; |
| } |
| |
| #endif /* defined(CONFIG_I2C_SLAVE) */ |
| |
| static void stm32_i2c_event(struct device *dev) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| #if defined(CONFIG_I2C_SLAVE) |
| if (data->slave_attached && !data->master_active) { |
| stm32_i2c_slave_event(dev); |
| return; |
| } |
| #endif |
| if (data->current.len) { |
| /* Send next byte */ |
| if (LL_I2C_IsActiveFlag_TXIS(i2c)) { |
| LL_I2C_TransmitData8(i2c, *data->current.buf); |
| } |
| |
| /* Receive next byte */ |
| if (LL_I2C_IsActiveFlag_RXNE(i2c)) { |
| *data->current.buf = LL_I2C_ReceiveData8(i2c); |
| } |
| |
| data->current.buf++; |
| data->current.len--; |
| } |
| |
| /* NACK received */ |
| if (LL_I2C_IsActiveFlag_NACK(i2c)) { |
| LL_I2C_ClearFlag_NACK(i2c); |
| data->current.is_nack = 1U; |
| goto end; |
| } |
| |
| /* STOP received */ |
| if (LL_I2C_IsActiveFlag_STOP(i2c)) { |
| LL_I2C_ClearFlag_STOP(i2c); |
| LL_I2C_DisableReloadMode(i2c); |
| goto end; |
| } |
| |
| /* Transfer Complete or Transfer Complete Reload */ |
| if (LL_I2C_IsActiveFlag_TC(i2c) || |
| LL_I2C_IsActiveFlag_TCR(i2c)) { |
| /* Issue stop condition if necessary */ |
| if (data->current.msg->flags & I2C_MSG_STOP) { |
| LL_I2C_GenerateStopCondition(i2c); |
| } else { |
| stm32_i2c_disable_transfer_interrupts(dev); |
| k_sem_give(&data->device_sync_sem); |
| } |
| } |
| |
| return; |
| end: |
| stm32_i2c_master_mode_end(dev); |
| } |
| |
| static int stm32_i2c_error(struct device *dev) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| #if defined(CONFIG_I2C_SLAVE) |
| if (data->slave_attached && !data->master_active) { |
| /* No need for a slave error function right now. */ |
| return 0; |
| } |
| #endif |
| |
| if (LL_I2C_IsActiveFlag_ARLO(i2c)) { |
| LL_I2C_ClearFlag_ARLO(i2c); |
| data->current.is_arlo = 1U; |
| goto end; |
| } |
| |
| if (LL_I2C_IsActiveFlag_BERR(i2c)) { |
| LL_I2C_ClearFlag_BERR(i2c); |
| data->current.is_err = 1U; |
| goto end; |
| } |
| |
| return 0; |
| end: |
| stm32_i2c_master_mode_end(dev); |
| return -EIO; |
| } |
| |
| #ifdef CONFIG_I2C_STM32_COMBINED_INTERRUPT |
| void stm32_i2c_combined_isr(void *arg) |
| { |
| struct device *dev = (struct device *) arg; |
| |
| if (stm32_i2c_error(dev)) { |
| return; |
| } |
| stm32_i2c_event(dev); |
| } |
| #else |
| |
| void stm32_i2c_event_isr(void *arg) |
| { |
| struct device *dev = (struct device *) arg; |
| |
| stm32_i2c_event(dev); |
| } |
| |
| void stm32_i2c_error_isr(void *arg) |
| { |
| struct device *dev = (struct device *) arg; |
| |
| stm32_i2c_error(dev); |
| } |
| #endif |
| |
| int stm32_i2c_msg_write(struct device *dev, struct i2c_msg *msg, |
| u8_t *next_msg_flags, uint16_t slave) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| data->current.len = msg->len; |
| data->current.buf = msg->buf; |
| data->current.is_write = 1U; |
| data->current.is_nack = 0U; |
| data->current.is_err = 0U; |
| data->current.msg = msg; |
| |
| msg_init(dev, msg, next_msg_flags, slave, LL_I2C_REQUEST_WRITE); |
| |
| stm32_i2c_enable_transfer_interrupts(dev); |
| LL_I2C_EnableIT_TX(i2c); |
| |
| k_sem_take(&data->device_sync_sem, K_FOREVER); |
| |
| if (data->current.is_nack || data->current.is_err || |
| data->current.is_arlo) { |
| goto error; |
| } |
| |
| return 0; |
| error: |
| if (data->current.is_arlo) { |
| LOG_DBG("%s: ARLO %d", __func__, |
| data->current.is_arlo); |
| data->current.is_arlo = 0U; |
| } |
| |
| if (data->current.is_nack) { |
| LOG_DBG("%s: NACK", __func__); |
| data->current.is_nack = 0U; |
| } |
| |
| if (data->current.is_err) { |
| LOG_DBG("%s: ERR %d", __func__, |
| data->current.is_err); |
| data->current.is_err = 0U; |
| } |
| |
| return -EIO; |
| } |
| |
| int stm32_i2c_msg_read(struct device *dev, struct i2c_msg *msg, |
| u8_t *next_msg_flags, uint16_t slave) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| data->current.len = msg->len; |
| data->current.buf = msg->buf; |
| data->current.is_write = 0U; |
| data->current.is_arlo = 0U; |
| data->current.is_err = 0U; |
| data->current.is_nack = 0U; |
| data->current.msg = msg; |
| |
| msg_init(dev, msg, next_msg_flags, slave, LL_I2C_REQUEST_READ); |
| |
| stm32_i2c_enable_transfer_interrupts(dev); |
| LL_I2C_EnableIT_RX(i2c); |
| |
| k_sem_take(&data->device_sync_sem, K_FOREVER); |
| |
| if (data->current.is_nack || data->current.is_err || |
| data->current.is_arlo) { |
| goto error; |
| } |
| |
| return 0; |
| error: |
| if (data->current.is_arlo) { |
| LOG_DBG("%s: ARLO %d", __func__, |
| data->current.is_arlo); |
| data->current.is_arlo = 0U; |
| } |
| |
| if (data->current.is_nack) { |
| LOG_DBG("%s: NACK", __func__); |
| data->current.is_nack = 0U; |
| } |
| |
| if (data->current.is_err) { |
| LOG_DBG("%s: ERR %d", __func__, |
| data->current.is_err); |
| data->current.is_err = 0U; |
| } |
| |
| return -EIO; |
| } |
| |
| #else /* !CONFIG_I2C_STM32_INTERRUPT */ |
| static inline int check_errors(struct device *dev, const char *funcname) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| if (LL_I2C_IsActiveFlag_NACK(i2c)) { |
| LL_I2C_ClearFlag_NACK(i2c); |
| LOG_DBG("%s: NACK", funcname); |
| goto error; |
| } |
| |
| if (LL_I2C_IsActiveFlag_ARLO(i2c)) { |
| LL_I2C_ClearFlag_ARLO(i2c); |
| LOG_DBG("%s: ARLO", funcname); |
| goto error; |
| } |
| |
| if (LL_I2C_IsActiveFlag_OVR(i2c)) { |
| LL_I2C_ClearFlag_OVR(i2c); |
| LOG_DBG("%s: OVR", funcname); |
| goto error; |
| } |
| |
| if (LL_I2C_IsActiveFlag_BERR(i2c)) { |
| LL_I2C_ClearFlag_BERR(i2c); |
| LOG_DBG("%s: BERR", funcname); |
| goto error; |
| } |
| |
| return 0; |
| error: |
| if (LL_I2C_IsEnabledReloadMode(i2c)) { |
| LL_I2C_DisableReloadMode(i2c); |
| } |
| return -EIO; |
| } |
| |
| static inline int msg_done(struct device *dev, unsigned int current_msg_flags) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| |
| /* Wait for transfer to complete */ |
| while (!LL_I2C_IsActiveFlag_TC(i2c) && !LL_I2C_IsActiveFlag_TCR(i2c)) { |
| if (check_errors(dev, __func__)) { |
| return -EIO; |
| } |
| } |
| /* Issue stop condition if necessary */ |
| if (current_msg_flags & I2C_MSG_STOP) { |
| LL_I2C_GenerateStopCondition(i2c); |
| while (!LL_I2C_IsActiveFlag_STOP(i2c)) { |
| } |
| |
| LL_I2C_ClearFlag_STOP(i2c); |
| LL_I2C_DisableReloadMode(i2c); |
| } |
| |
| return 0; |
| } |
| |
| int stm32_i2c_msg_write(struct device *dev, struct i2c_msg *msg, |
| u8_t *next_msg_flags, uint16_t slave) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| unsigned int len = 0U; |
| u8_t *buf = msg->buf; |
| |
| msg_init(dev, msg, next_msg_flags, slave, LL_I2C_REQUEST_WRITE); |
| |
| len = msg->len; |
| while (len) { |
| while (1) { |
| if (LL_I2C_IsActiveFlag_TXIS(i2c)) { |
| break; |
| } |
| |
| if (check_errors(dev, __func__)) { |
| return -EIO; |
| } |
| } |
| |
| LL_I2C_TransmitData8(i2c, *buf); |
| buf++; |
| len--; |
| } |
| |
| return msg_done(dev, msg->flags); |
| } |
| |
| int stm32_i2c_msg_read(struct device *dev, struct i2c_msg *msg, |
| u8_t *next_msg_flags, uint16_t slave) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| unsigned int len = 0U; |
| u8_t *buf = msg->buf; |
| |
| msg_init(dev, msg, next_msg_flags, slave, LL_I2C_REQUEST_READ); |
| |
| len = msg->len; |
| while (len) { |
| while (!LL_I2C_IsActiveFlag_RXNE(i2c)) { |
| if (check_errors(dev, __func__)) { |
| return -EIO; |
| } |
| } |
| |
| *buf = LL_I2C_ReceiveData8(i2c); |
| buf++; |
| len--; |
| } |
| |
| return msg_done(dev, msg->flags); |
| } |
| #endif |
| |
| int stm32_i2c_configure_timing(struct device *dev, u32_t clock) |
| { |
| const struct i2c_stm32_config *cfg = DEV_CFG(dev); |
| struct i2c_stm32_data *data = DEV_DATA(dev); |
| I2C_TypeDef *i2c = cfg->i2c; |
| u32_t i2c_hold_time_min, i2c_setup_time_min; |
| u32_t i2c_h_min_time, i2c_l_min_time; |
| u32_t presc = 1U; |
| u32_t timing = 0U; |
| |
| switch (I2C_SPEED_GET(data->dev_config)) { |
| case I2C_SPEED_STANDARD: |
| i2c_h_min_time = 4000U; |
| i2c_l_min_time = 4700U; |
| i2c_hold_time_min = 500U; |
| i2c_setup_time_min = 1250U; |
| break; |
| case I2C_SPEED_FAST: |
| i2c_h_min_time = 600U; |
| i2c_l_min_time = 1300U; |
| i2c_hold_time_min = 375U; |
| i2c_setup_time_min = 500U; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Calculate period until prescaler matches */ |
| do { |
| u32_t t_presc = clock / presc; |
| u32_t ns_presc = NSEC_PER_SEC / t_presc; |
| u32_t sclh = i2c_h_min_time / ns_presc; |
| u32_t scll = i2c_l_min_time / ns_presc; |
| u32_t sdadel = i2c_hold_time_min / ns_presc; |
| u32_t scldel = i2c_setup_time_min / ns_presc; |
| |
| if ((sclh - 1) > 255 || (scll - 1) > 255) { |
| ++presc; |
| continue; |
| } |
| |
| if (sdadel > 15 || (scldel - 1) > 15) { |
| ++presc; |
| continue; |
| } |
| |
| timing = __LL_I2C_CONVERT_TIMINGS(presc - 1, |
| scldel - 1, sdadel, sclh - 1, scll - 1); |
| break; |
| } while (presc < 16); |
| |
| if (presc >= 16U) { |
| LOG_DBG("I2C:failed to find prescaler value"); |
| return -EINVAL; |
| } |
| |
| LL_I2C_SetTiming(i2c, timing); |
| |
| return 0; |
| } |