| /* |
| * Copyright (c) 2018-2022 Nordic Semiconductor ASA |
| * Copyright (c) 2018 Ioannis Glaropoulos |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define HAL_RADIO_NS2US_CEIL(ns) ((ns + 999)/1000) |
| #define HAL_RADIO_NS2US_ROUND(ns) ((ns + 500)/1000) |
| |
| /* Use the timer instance ID, not NRF_TIMERx directly, so that it can be checked |
| * in radio_nrf5_ppi.h by the preprocessor. |
| */ |
| #define EVENT_TIMER_ID 0 |
| #define EVENT_TIMER _CONCAT(NRF_TIMER, EVENT_TIMER_ID) |
| |
| /* Wrapper for EVENTS_END event generated by Radio peripheral at the very end of the transmission |
| * or reception of a PDU on air. In case of regular PDU it is generated when last bit of CRC is |
| * received or transmitted. |
| */ |
| #define NRF_RADIO_TXRX_END_EVENT EVENTS_END |
| /* Wrapper for RADIO_SHORTS mask connecting EVENTS_END to EVENTS_DISABLE. |
| * This is a default shortcut used to automatically disable Radio after end of PDU. |
| */ |
| #define NRF_RADIO_SHORTS_PDU_END_DISABLE RADIO_SHORTS_END_DISABLE_Msk |
| |
| /* Delay of EVENTS_PHYEND event on receive PDU without CTE inclded when CTEINLINE is enabled */ |
| #define RADIO_EVENTS_PHYEND_DELAY_US 16 |
| |
| /* Delay of CCM TASKS_CRYPT start in number of bits for Radio Bit counter */ |
| #define CCM_TASKS_CRYPT_DELAY_BITS 3 |
| |
| /* EVENTS_TIMER capture register used for sampling TIMER time-stamps. */ |
| #define HAL_EVENT_TIMER_SAMPLE_CC_OFFSET 3 |
| #define HAL_EVENT_TIMER_SAMPLE_TASK NRF_TIMER_TASK_CAPTURE3 |
| |
| /* Define to reset PPI registration */ |
| #define NRF_PPI_NONE 0 |
| |
| #if defined(CONFIG_SOC_SERIES_BSIM_NRFXX) |
| #include "radio_sim_nrfxx.h" |
| #elif defined(CONFIG_SOC_SERIES_NRF51X) |
| #include "radio_nrf51.h" |
| #elif defined(CONFIG_SOC_NRF52805) |
| #include "radio_nrf52805.h" |
| #elif defined(CONFIG_SOC_NRF52810) |
| #include "radio_nrf52810.h" |
| #elif defined(CONFIG_SOC_NRF52811) |
| #include "radio_nrf52811.h" |
| #elif defined(CONFIG_SOC_NRF52820) |
| #include "radio_nrf52820.h" |
| #elif defined(CONFIG_SOC_NRF52832) |
| #include "radio_nrf52832.h" |
| #elif defined(CONFIG_SOC_NRF52833) |
| #include "radio_nrf52833.h" |
| #elif defined(CONFIG_SOC_NRF52840) |
| #include <nrf52_erratas.h> |
| #include "radio_nrf52840.h" |
| #elif defined(CONFIG_SOC_NRF5340_CPUNET) |
| #include <hal/nrf_vreqctrl.h> |
| #include "radio_nrf5340.h" |
| #elif |
| #error "Unsupported SoC." |
| #endif |
| |
| #if defined(CONFIG_SOC_SERIES_NRF51X) |
| #define HAL_RADIO_PDU_LEN_MAX (BIT(5) - 1) |
| #else |
| #define HAL_RADIO_PDU_LEN_MAX (BIT(8) - 1) |
| #endif |
| |
| #include <nrf_peripherals.h> |
| |
| /* This has to come before the ppi/dppi includes below. */ |
| #include "radio_nrf5_fem.h" |
| |
| #if defined(PPI_PRESENT) |
| #include "radio_nrf5_ppi.h" |
| #elif defined(DPPI_PRESENT) |
| #include "radio_nrf5_dppi.h" |
| #else |
| #error "PPI or DPPI abstractions missing." |
| #endif |
| |
| #include "radio_nrf5_txp.h" |
| |
| /* Common NRF_RADIO power-on reset value. Refer to Product Specification, |
| * RADIO Registers section for the documented reset values. |
| * |
| * NOTE: Only implementation used values defined here. |
| * In the future if MDK or nRFx header include these, use them instead. |
| */ |
| #define HAL_RADIO_RESET_VALUE_PCNF1 0x00000000UL |
