| /* |
| * Copyright (c) 2023 Nuvoton Technology Corporation. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| |
| #include <nuvoton/m46x.dtsi> |
| #include "numaker_pfm_m467-pinctrl.dtsi" |
| #include <zephyr/dt-bindings/input/input-event-codes.h> |
| |
| / { |
| model = "Nuvoton PFM M467 board"; |
| compatible = "nuvoton,pfm-m467", "nuvoton,m467"; |
| |
| aliases { |
| led0 = &green_led; |
| led1 = &blue_led; |
| led2 = &red_led; |
| sw0 = &user_button_1; |
| sw1 = &user_button_2; |
| }; |
| |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,code-partition = &slot0_partition; |
| zephyr,canbus = &canfd0; |
| }; |
| |
| |
| leds { |
| compatible = "gpio-leds"; |
| red_led: led_0 { |
| gpios = <&gpioh 4 GPIO_ACTIVE_LOW>; |
| label = "User LD1"; |
| }; |
| green_led: led_1 { |
| gpios = <&gpioh 6 GPIO_ACTIVE_LOW>; |
| label = "User LD2"; |
| }; |
| blue_led: led_2 { |
| gpios = <&gpioh 5 GPIO_ACTIVE_LOW>; |
| label = "User LD3"; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| user_button_1: button_1 { |
| label = "User SW2"; |
| gpios = <&gpioh 1 GPIO_ACTIVE_LOW>; |
| zephyr,code = <INPUT_KEY_0>; |
| }; |
| user_button_2: button_2 { |
| label = "User SW3"; |
| gpios = <&gpioh 0 GPIO_ACTIVE_LOW>; |
| zephyr,code = <INPUT_KEY_1>; |
| }; |
| }; |
| }; |
| |
| &scc { |
| /* For USB 1.1 Host/Device/OTG, configure to 192MHz, which can generate necessary 48MHz. */ |
| /* For USB 2.0 Host/Device/OTG or no USB application, comment out to use default. */ |
| core-clock = <192000000>; |
| }; |
| |
| &gpiob { |
| status = "okay"; |
| }; |
| |
| &gpioh { |
| status = "okay"; |
| }; |
| |
| &flash0 { |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| slot0_partition: partition@0 { |
| label = "image-0"; |
| reg = <0x00000000 0x00080000>; |
| }; |
| slot1_partition: partition@80000 { |
| label = "image-1"; |
| reg = <0x00080000 0x0007e000>; |
| }; |
| storage_partition: partition@fe000 { |
| label = "storage"; |
| reg = <0x000fe000 0x00002000>; |
| }; |
| }; |
| }; |
| |
| &sram0 { |
| reg = <0x20000000 DT_SIZE_K(512)>; |
| }; |
| |
| &uart0 { |
| current-speed = <115200>; |
| pinctrl-0 = <&uart0_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &canfd0 { |
| bus-speed = <125000>; |
| bus-speed-data = <1000000>; |
| pinctrl-0 = <&canfd0_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &emac { |
| pinctrl-0 = <&emac_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| /* On enabled, 'core-clock', as above, is required to to be 192MHz. */ |
| zephyr_udc0: &usbd { |
| pinctrl-0 = <&usbd_default>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |