| /* |
| * Copyright (c) 2021 Telink Semiconductor |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT telink_b91_zb |
| |
| #include "rf.h" |
| #include "stimer.h" |
| |
| #define LOG_MODULE_NAME ieee802154_b91 |
| #if defined(CONFIG_IEEE802154_DRIVER_LOG_LEVEL) |
| #define LOG_LEVEL CONFIG_IEEE802154_DRIVER_LOG_LEVEL |
| #else |
| #define LOG_LEVEL LOG_LEVEL_NONE |
| #endif |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(LOG_MODULE_NAME); |
| |
| #include <zephyr/random/random.h> |
| #include <zephyr/net/ieee802154_radio.h> |
| #include <zephyr/irq.h> |
| #if defined(CONFIG_NET_L2_OPENTHREAD) |
| #include <zephyr/net/openthread.h> |
| #endif |
| |
| #include <zephyr/drivers/interrupt_controller/riscv_plic.h> |
| |
| #include "ieee802154_b91.h" |
| |
| |
| /* B91 data structure */ |
| static struct b91_data data; |
| |
| /* Set filter PAN ID */ |
| static int b91_set_pan_id(uint16_t pan_id) |
| { |
| uint8_t pan_id_le[B91_PAN_ID_SIZE]; |
| |
| sys_put_le16(pan_id, pan_id_le); |
| memcpy(data.filter_pan_id, pan_id_le, B91_PAN_ID_SIZE); |
| |
| return 0; |
| } |
| |
| /* Set filter short address */ |
| static int b91_set_short_addr(uint16_t short_addr) |
| { |
| uint8_t short_addr_le[B91_SHORT_ADDRESS_SIZE]; |
| |
| sys_put_le16(short_addr, short_addr_le); |
| memcpy(data.filter_short_addr, short_addr_le, B91_SHORT_ADDRESS_SIZE); |
| |
| return 0; |
| } |
| |
| /* Set filter IEEE address */ |
| static int b91_set_ieee_addr(const uint8_t *ieee_addr) |
| { |
| memcpy(data.filter_ieee_addr, ieee_addr, B91_IEEE_ADDRESS_SIZE); |
| |
| return 0; |
| } |
| |
| /* Filter PAN ID, short address and IEEE address */ |
| static bool b91_run_filter(uint8_t *rx_buffer) |
| { |
| /* Check destination PAN Id */ |
| if (memcmp(&rx_buffer[B91_PAN_ID_OFFSET], data.filter_pan_id, |
| B91_PAN_ID_SIZE) != 0 && |
| memcmp(&rx_buffer[B91_PAN_ID_OFFSET], B91_BROADCAST_ADDRESS, |
| B91_PAN_ID_SIZE) != 0) { |
| return false; |
| } |
| |
| /* Check destination address */ |
| switch (rx_buffer[B91_DEST_ADDR_TYPE_OFFSET] & B91_DEST_ADDR_TYPE_MASK) { |
| case B91_DEST_ADDR_TYPE_SHORT: |
| /* First check if the destination is broadcast */ |
| /* If not broadcast, check if length and address matches */ |
| if (memcmp(&rx_buffer[B91_DEST_ADDR_OFFSET], B91_BROADCAST_ADDRESS, |
| B91_SHORT_ADDRESS_SIZE) != 0 && |
| memcmp(&rx_buffer[B91_DEST_ADDR_OFFSET], data.filter_short_addr, |
| B91_SHORT_ADDRESS_SIZE) != 0) { |
| return false; |
| } |
| break; |
| |
| case B91_DEST_ADDR_TYPE_IEEE: |
| /* If not broadcast, check if length and address matches */ |
| if ((net_if_get_link_addr(data.iface)->len != B91_IEEE_ADDRESS_SIZE) || |
| memcmp(&rx_buffer[B91_DEST_ADDR_OFFSET], data.filter_ieee_addr, |
| B91_IEEE_ADDRESS_SIZE) != 0) { |
| return false; |
| } |
| break; |
| |
| default: |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Get MAC address */ |
| static inline uint8_t *b91_get_mac(const struct device *dev) |
| { |
| struct b91_data *b91 = dev->data; |
| |
| #if defined(CONFIG_IEEE802154_B91_RANDOM_MAC) |
| uint32_t *ptr = (uint32_t *)(b91->mac_addr); |
| |
| UNALIGNED_PUT(sys_rand32_get(), ptr); |
| ptr = (uint32_t *)(b91->mac_addr + 4); |
| UNALIGNED_PUT(sys_rand32_get(), ptr); |
| |
| /* |
| * Clear bit 0 to ensure it isn't a multicast address and set |
| * bit 1 to indicate address is locally administered and may |
| * not be globally unique. |
| */ |
| b91->mac_addr[0] = (b91->mac_addr[0] & ~0x01) | 0x02; |
| #else |
| /* Vendor Unique Identifier */ |
| b91->mac_addr[0] = 0xC4; |
| b91->mac_addr[1] = 0x19; |
| b91->mac_addr[2] = 0xD1; |
| b91->mac_addr[3] = 0x00; |
| |
| /* Extended Unique Identifier */ |
| b91->mac_addr[4] = CONFIG_IEEE802154_B91_MAC4; |
| b91->mac_addr[5] = CONFIG_IEEE802154_B91_MAC5; |
| b91->mac_addr[6] = CONFIG_IEEE802154_B91_MAC6; |
| b91->mac_addr[7] = CONFIG_IEEE802154_B91_MAC7; |
| #endif |
| |
| return b91->mac_addr; |
| } |
| |
| /* Convert RSSI to LQI */ |
| static uint8_t b91_convert_rssi_to_lqi(int8_t rssi) |
| { |
| uint32_t lqi32 = 0; |
| |
| /* check for MIN value */ |
| if (rssi < B91_RSSI_TO_LQI_MIN) { |
| return 0; |
| } |
| |
| /* convert RSSI to LQI */ |
| lqi32 = B91_RSSI_TO_LQI_SCALE * (rssi - B91_RSSI_TO_LQI_MIN); |
| |
| /* check for MAX value */ |
| if (lqi32 > 0xFF) { |
| lqi32 = 0xFF; |
| } |
| |
| return (uint8_t)lqi32; |
| } |
| |
| /* Update RSSI and LQI parameters */ |
| static void b91_update_rssi_and_lqi(struct net_pkt *pkt) |
| { |
| int8_t rssi; |
| uint8_t lqi; |
| |
| rssi = ((signed char)(data.rx_buffer |
| [data.rx_buffer[B91_LENGTH_OFFSET] + B91_RSSI_OFFSET])) - 110; |
| lqi = b91_convert_rssi_to_lqi(rssi); |
| |
| net_pkt_set_ieee802154_lqi(pkt, lqi); |
| net_pkt_set_ieee802154_rssi_dbm(pkt, rssi); |
| } |
| |
| /* Prepare TX buffer */ |
| static int b91_set_tx_payload(uint8_t *payload, uint8_t payload_len) |
| { |
| unsigned char rf_data_len; |
| unsigned int rf_tx_dma_len; |
| |
| /* See Telink SDK Dev Handbook, AN-21010600, section 21.5.2.2. */ |
| if (payload_len > (B91_TRX_LENGTH - B91_PAYLOAD_OFFSET - IEEE802154_FCS_LENGTH)) { |
| return -EINVAL; |
| } |
| |
| rf_data_len = payload_len + 1; |
| rf_tx_dma_len = rf_tx_packet_dma_len(rf_data_len); |
| data.tx_buffer[0] = rf_tx_dma_len & 0xff; |
| data.tx_buffer[1] = (rf_tx_dma_len >> 8) & 0xff; |
| data.tx_buffer[2] = (rf_tx_dma_len >> 16) & 0xff; |
| data.tx_buffer[3] = (rf_tx_dma_len >> 24) & 0xff; |
| data.tx_buffer[4] = payload_len + IEEE802154_FCS_LENGTH; |
| memcpy(data.tx_buffer + B91_PAYLOAD_OFFSET, payload, payload_len); |
| |
| return 0; |
| } |
| |
| /* Enable ack handler */ |
| static void b91_handle_ack_en(void) |
| { |
| data.ack_handler_en = true; |
| } |
| |
| /* Disable ack handler */ |
| static void b91_handle_ack_dis(void) |
| { |
| data.ack_handler_en = false; |
| } |
| |
| /* Handle acknowledge packet */ |
| static void b91_handle_ack(void) |
| { |
| struct net_pkt *ack_pkt; |
| |
| /* allocate ack packet */ |
| ack_pkt = net_pkt_rx_alloc_with_buffer(data.iface, B91_ACK_FRAME_LEN, |
| AF_UNSPEC, 0, K_NO_WAIT); |
| if (!ack_pkt) { |
| LOG_ERR("No free packet available."); |
| return; |
| } |
| |
| /* update packet data */ |
| if (net_pkt_write(ack_pkt, data.rx_buffer + B91_PAYLOAD_OFFSET, |
| B91_ACK_FRAME_LEN) < 0) { |
| LOG_ERR("Failed to write to a packet."); |
| goto out; |
| } |
| |
| /* update RSSI and LQI */ |
| b91_update_rssi_and_lqi(ack_pkt); |
| |
| /* init net cursor */ |
| net_pkt_cursor_init(ack_pkt); |
| |
| /* handle ack */ |
| if (ieee802154_handle_ack(data.iface, ack_pkt) != NET_OK) { |
| LOG_INF("ACK packet not handled - releasing."); |
| } |
| |
| /* release ack_wait semaphore */ |
| k_sem_give(&data.ack_wait); |
| |
| out: |
| net_pkt_unref(ack_pkt); |
| } |
| |
| /* Send acknowledge packet */ |
| static void b91_send_ack(uint8_t seq_num) |
| { |
| uint8_t ack_buf[] = { B91_ACK_TYPE, 0, seq_num }; |
| |
| if (b91_set_tx_payload(ack_buf, sizeof(ack_buf))) { |
| return; |
| } |
| |
| rf_set_txmode(); |
| delay_us(CONFIG_IEEE802154_B91_SET_TXRX_DELAY_US); |
| rf_tx_pkt(data.tx_buffer); |
| } |
| |
| /* RX IRQ handler */ |
| static void b91_rf_rx_isr(void) |
| { |
| uint8_t status; |
| uint8_t length; |
| uint8_t *payload; |
| struct net_pkt *pkt; |
| |
| /* disable DMA and clear IRQ flag */ |
| dma_chn_dis(DMA1); |
| rf_clr_irq_status(FLD_RF_IRQ_RX); |
| |
| /* check CRC */ |
| if (rf_zigbee_packet_crc_ok(data.rx_buffer)) { |
| /* get payload length */ |
| if (IS_ENABLED(CONFIG_IEEE802154_RAW_MODE) || |
| IS_ENABLED(CONFIG_NET_L2_OPENTHREAD)) { |
| length = data.rx_buffer[B91_LENGTH_OFFSET]; |
| } else { |
| length = data.rx_buffer[B91_LENGTH_OFFSET] - B91_FCS_LENGTH; |
| } |
| |
| /* check length */ |
| if ((length < B91_PAYLOAD_MIN) || (length > B91_PAYLOAD_MAX)) { |
| LOG_ERR("Invalid length\n"); |
| goto exit; |
| } |
| |
| /* get payload */ |
| payload = (uint8_t *)(data.rx_buffer + B91_PAYLOAD_OFFSET); |
| |
| /* handle acknowledge packet if enabled */ |
| if ((length == (B91_ACK_FRAME_LEN + B91_FCS_LENGTH)) && |
| ((payload[B91_FRAME_TYPE_OFFSET] & B91_FRAME_TYPE_MASK) == B91_ACK_TYPE)) { |
| if (data.ack_handler_en) { |
| b91_handle_ack(); |
| } |
| goto exit; |
| } |
| |
| /* run filter (check PAN ID and destination address) */ |
| if (b91_run_filter(payload) == false) { |
| LOG_DBG("Packet received is not addressed to me"); |
| goto exit; |
| } |
| |
| /* send ack if requested */ |
| if (payload[B91_FRAME_TYPE_OFFSET] & B91_ACK_REQUEST) { |
| b91_send_ack(payload[B91_DSN_OFFSET]); |
| } |
| |
| /* get packet pointer from NET stack */ |
| pkt = net_pkt_rx_alloc_with_buffer(data.iface, length, AF_UNSPEC, 0, K_NO_WAIT); |
| if (!pkt) { |
| LOG_ERR("No pkt available"); |
| goto exit; |
| } |
| |
| /* update packet data */ |
| if (net_pkt_write(pkt, payload, length)) { |
| LOG_ERR("Failed to write to a packet."); |
| net_pkt_unref(pkt); |
| goto exit; |
| } |
| |
| /* update RSSI and LQI parameters */ |
| b91_update_rssi_and_lqi(pkt); |
| |
| /* transfer data to NET stack */ |
| status = net_recv_data(data.iface, pkt); |
| if (status < 0) { |
| LOG_ERR("RCV Packet dropped by NET stack: %d", status); |
| net_pkt_unref(pkt); |
| } |
| } |
| |
| exit: |
| dma_chn_en(DMA1); |
| } |
| |
| /* TX IRQ handler */ |
| static void b91_rf_tx_isr(void) |
| { |
| /* clear irq status */ |
| rf_clr_irq_status(FLD_RF_IRQ_TX); |
| |
| /* release tx semaphore */ |
| k_sem_give(&data.tx_wait); |
| |
| /* set to rx mode */ |
| rf_set_rxmode(); |
| } |
| |
| /* IRQ handler */ |
| static void b91_rf_isr(void) |
| { |
| if (rf_get_irq_status(FLD_RF_IRQ_RX)) { |
| b91_rf_rx_isr(); |
| } else if (rf_get_irq_status(FLD_RF_IRQ_TX)) { |
| b91_rf_tx_isr(); |
| } else { |
| rf_clr_irq_status(FLD_RF_IRQ_ALL); |
| } |
| } |
| |
| /* Driver initialization */ |
| static int b91_init(const struct device *dev) |
| { |
| struct b91_data *b91 = dev->data; |
| |
| /* init semaphores */ |
| k_sem_init(&b91->tx_wait, 0, 1); |
| k_sem_init(&b91->ack_wait, 0, 1); |
| |
| /* init rf module */ |
| rf_mode_init(); |
| rf_set_zigbee_250K_mode(); |
| rf_set_tx_dma(2, B91_TRX_LENGTH); |
| rf_set_rx_dma(data.rx_buffer, 3, B91_TRX_LENGTH); |
| rf_set_rxmode(); |
| |
| /* init IRQs */ |
| IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), b91_rf_isr, 0, 0); |
| riscv_plic_irq_enable(DT_INST_IRQN(0)); |
| riscv_plic_set_priority(DT_INST_IRQN(0), DT_INST_IRQ(0, priority)); |
| rf_set_irq_mask(FLD_RF_IRQ_RX | FLD_RF_IRQ_TX); |
| |
| /* init data variables */ |
| data.is_started = true; |
| data.ack_handler_en = false; |
| data.current_channel = 0; |
| |
| return 0; |
| } |
| |
| /* API implementation: iface_init */ |
| static void b91_iface_init(struct net_if *iface) |
| { |
| const struct device *dev = net_if_get_device(iface); |
| struct b91_data *b91 = dev->data; |
| uint8_t *mac = b91_get_mac(dev); |
| |
| net_if_set_link_addr(iface, mac, B91_IEEE_ADDRESS_SIZE, NET_LINK_IEEE802154); |
| |
| b91->iface = iface; |
| |
| ieee802154_init(iface); |
| } |
| |
| /* API implementation: get_capabilities */ |
| static enum ieee802154_hw_caps b91_get_capabilities(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| return IEEE802154_HW_FCS | IEEE802154_HW_FILTER | |
| IEEE802154_HW_TX_RX_ACK | IEEE802154_HW_RX_TX_ACK; |
| } |
| |
| /* API implementation: cca */ |
| static int b91_cca(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| unsigned int t1 = stimer_get_tick(); |
| |
| while (!clock_time_exceed(t1, B91_CCA_TIME_MAX_US)) { |
| if (rf_get_rssi() < CONFIG_IEEE802154_B91_CCA_RSSI_THRESHOLD) { |
| return 0; |
| } |
| } |
| |
| return -EBUSY; |
| } |
| |
| /* API implementation: set_channel */ |
| static int b91_set_channel(const struct device *dev, uint16_t channel) |
| { |
| ARG_UNUSED(dev); |
| |
| if (channel > 26) { |
| return -EINVAL; |
| } |
| |
| if (channel < 11) { |
| return -ENOTSUP; |
| } |
| |
| if (data.current_channel != channel) { |
| data.current_channel = channel; |
| rf_set_chn(B91_LOGIC_CHANNEL_TO_PHYSICAL(channel)); |
| rf_set_rxmode(); |
| } |
| |
| return 0; |
| } |
| |
| /* API implementation: filter */ |
| static int b91_filter(const struct device *dev, |
| bool set, |
| enum ieee802154_filter_type type, |
| const struct ieee802154_filter *filter) |
| { |
| if (!set) { |
| return -ENOTSUP; |
| } |
| |
| if (type == IEEE802154_FILTER_TYPE_IEEE_ADDR) { |
| return b91_set_ieee_addr(filter->ieee_addr); |
| } else if (type == IEEE802154_FILTER_TYPE_SHORT_ADDR) { |
| return b91_set_short_addr(filter->short_addr); |
| } else if (type == IEEE802154_FILTER_TYPE_PAN_ID) { |
| return b91_set_pan_id(filter->pan_id); |
| } |
| |
| return -ENOTSUP; |
| } |
| |
| /* API implementation: set_txpower */ |
| static int b91_set_txpower(const struct device *dev, int16_t dbm) |
| { |
| ARG_UNUSED(dev); |
| |
| /* check for supported Min/Max range */ |
| if (dbm < B91_TX_POWER_MIN) { |
| dbm = B91_TX_POWER_MIN; |
| } else if (dbm > B91_TX_POWER_MAX) { |
| dbm = B91_TX_POWER_MAX; |
| } |
| |
| /* set TX power */ |
| rf_set_power_level(b91_tx_pwr_lt[dbm - B91_TX_POWER_MIN]); |
| |
| return 0; |
| } |
| |
| /* API implementation: start */ |
| static int b91_start(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| /* check if RF is already started */ |
| if (!data.is_started) { |
| rf_set_rxmode(); |
| delay_us(CONFIG_IEEE802154_B91_SET_TXRX_DELAY_US); |
| riscv_plic_irq_enable(DT_INST_IRQN(0)); |
| data.is_started = true; |
| } |
| |
| return 0; |
| } |
| |
| /* API implementation: stop */ |
| static int b91_stop(const struct device *dev) |
| { |
| ARG_UNUSED(dev); |
| |
| /* check if RF is already stopped */ |
| if (data.is_started) { |
| riscv_plic_irq_disable(DT_INST_IRQN(0)); |
| rf_set_tx_rx_off(); |
| delay_us(CONFIG_IEEE802154_B91_SET_TXRX_DELAY_US); |
| data.is_started = false; |
| } |
| |
| return 0; |
| } |
| |
| /* API implementation: tx */ |
| static int b91_tx(const struct device *dev, |
| enum ieee802154_tx_mode mode, |
| struct net_pkt *pkt, |
| struct net_buf *frag) |
| { |
| ARG_UNUSED(pkt); |
| |
| int status; |
| struct b91_data *b91 = dev->data; |
| |
| /* check for supported mode */ |
| if (mode != IEEE802154_TX_MODE_DIRECT) { |
| LOG_DBG("TX mode %d not supported", mode); |
| return -ENOTSUP; |
| } |
| |
| /* prepare tx buffer */ |
| status = b91_set_tx_payload(frag->data, frag->len); |
| if (status) { |
| return status; |
| } |
| |
| /* reset semaphores */ |
| k_sem_reset(&b91->tx_wait); |
| k_sem_reset(&b91->ack_wait); |
| |
| /* start transmission */ |
| rf_set_txmode(); |
| delay_us(CONFIG_IEEE802154_B91_SET_TXRX_DELAY_US); |
| rf_tx_pkt(data.tx_buffer); |
| |
| /* wait for tx done */ |
| status = k_sem_take(&b91->tx_wait, K_MSEC(B91_TX_WAIT_TIME_MS)); |
| if (status != 0) { |
| rf_set_rxmode(); |
| return -EIO; |
| } |
| |
| /* wait for ACK if requested */ |
| if (frag->data[B91_FRAME_TYPE_OFFSET] & B91_ACK_REQUEST) { |
| b91_handle_ack_en(); |
| status = k_sem_take(&b91->ack_wait, K_MSEC(B91_ACK_WAIT_TIME_MS)); |
| b91_handle_ack_dis(); |
| } |
| |
| return status; |
| } |
| |
| /* API implementation: ed_scan */ |
| static int b91_ed_scan(const struct device *dev, uint16_t duration, |
| energy_scan_done_cb_t done_cb) |
| { |
| ARG_UNUSED(dev); |
| ARG_UNUSED(duration); |
| ARG_UNUSED(done_cb); |
| |
| /* ed_scan not supported */ |
| |
| return -ENOTSUP; |
| } |
| |
| /* API implementation: configure */ |
| static int b91_configure(const struct device *dev, |
| enum ieee802154_config_type type, |
| const struct ieee802154_config *config) |
| { |
| ARG_UNUSED(dev); |
| ARG_UNUSED(type); |
| ARG_UNUSED(config); |
| |
| /* configure not supported */ |
| |
| return -ENOTSUP; |
| } |
| |
| /* driver-allocated attribute memory - constant across all driver instances */ |
| IEEE802154_DEFINE_PHY_SUPPORTED_CHANNELS(drv_attr, 11, 26); |
| |
| /* API implementation: attr_get */ |
| static int b91_attr_get(const struct device *dev, enum ieee802154_attr attr, |
| struct ieee802154_attr_value *value) |
| { |
| ARG_UNUSED(dev); |
| |
| return ieee802154_attr_get_channel_page_and_range( |
| attr, IEEE802154_ATTR_PHY_CHANNEL_PAGE_ZERO_OQPSK_2450_BPSK_868_915, |
| &drv_attr.phy_supported_channels, value); |
| } |
| |
| /* IEEE802154 driver APIs structure */ |
| static const struct ieee802154_radio_api b91_radio_api = { |
| .iface_api.init = b91_iface_init, |
| .get_capabilities = b91_get_capabilities, |
| .cca = b91_cca, |
| .set_channel = b91_set_channel, |
| .filter = b91_filter, |
| .set_txpower = b91_set_txpower, |
| .start = b91_start, |
| .stop = b91_stop, |
| .tx = b91_tx, |
| .ed_scan = b91_ed_scan, |
| .configure = b91_configure, |
| .attr_get = b91_attr_get, |
| }; |
| |
| |
| #if defined(CONFIG_NET_L2_IEEE802154) |
| #define L2 IEEE802154_L2 |
| #define L2_CTX_TYPE NET_L2_GET_CTX_TYPE(IEEE802154_L2) |
| #define MTU 125 |
| #elif defined(CONFIG_NET_L2_OPENTHREAD) |
| #define L2 OPENTHREAD_L2 |
| #define L2_CTX_TYPE NET_L2_GET_CTX_TYPE(OPENTHREAD_L2) |
| #define MTU 1280 |
| #endif |
| |
| |
| /* IEEE802154 driver registration */ |
| #if defined(CONFIG_NET_L2_IEEE802154) || defined(CONFIG_NET_L2_OPENTHREAD) |
| NET_DEVICE_DT_INST_DEFINE(0, b91_init, NULL, &data, NULL, |
| CONFIG_IEEE802154_B91_INIT_PRIO, |
| &b91_radio_api, L2, L2_CTX_TYPE, MTU); |
| #else |
| DEVICE_DT_INST_DEFINE(0, b91_init, NULL, &data, NULL, |
| POST_KERNEL, CONFIG_IEEE802154_B91_INIT_PRIO, |
| &b91_radio_api); |
| #endif |